KERN KXP_V20 Series, KXP 6V20LM, KXP 15V20M, KXP 15V20LM, KXP 30V20M Installation Instructions Manual

KERN & Sohn GmbH

Ziegelei 1

E-Mail: [e-mail]

Tel: +49-[0]7433- 9933-0

Internet: www.kern-sohn.com

Installation instructions platform

KERN KXP_V20

Version 1.1

04/2015

GB

D-72336 Balingen

Fax: +49-[0]7433-9933-149

Importør:
Impex Produkter AS
Gamle Drammensvei 107
1363 Høvik
www.impex.no
[e-mail]
Tel.: [phone]

KXP V20_6-300-IA-e-1511

KERN KXP V20

Operating Instruction Platforms

GB

Version 1.1 04/2015

Tabel of contents

1 General ........................................................................................................... 3

2 Safety precautions ......................................................................................... 3

3 Setting up the weighing platform ................................................................. 4

3.1 Selecting the site of installation .............................................................................................. 4

3.2 Package volume ....................................................................................................................... 4

3.3 Protect screw ............................................................................................................................ 4

3.4 Packaging / return transport ................................................................................................... 5

3.5 Ambient conditions .................................................................................................................. 5

3.6 Levelling .................................................................................................................................... 6

3.7 Connecting to the weighing terminal ..................................................................................... 7

4 Operating limits ............................................................................................. 7

5 Cleaning .......................................................................................................... 8

6 Technical data ................................................................................................ 8

6.1 Dimensions in mm .................................................................................................................... 8

6.2 Technical data of the weighing cell ........................................................................................ 9

6.3 Preload, Deadload and Overload settings ........................................................................... 10

KXP V20_6-300-IA-e-1511 2

• These installation instructions cover all information required for the installation

1 General

and start-up of the following platforms:

KXP 6V20LM
KXP 15V20M / KXP15V20LM
KXP 30V20M / KXP30V20LM
KXP 60V20M / KXP 60V20LM
KXP150V20M / KXP 150V20LM

KXP300V20M

2 Safety precautions

Product safety plays an important role at KERN & Sohn.
Non-observance of the following instructions can lead to damage to the weighing
platform and/or injuries.

 Before using the weighing platform read these instructions. Store these instruc-

tions for future use.

 Take care when transporting or lifting heavy devices.
 Only qualified personnel may install and maintain the weighing platform.
 Disconnect the weighing terminal from the power supply before carrying out

cleaning, installation and maintenance.

 The weighing platform must have stabilized to room temperature before the sup-

ply voltage is switched on.

 Do not use the weighing platform in hazardous environments.

3 KXP V20_6-300-IA-e-1511

3 Setting up the weighing platform

• The surface must be able to bear

Protect screw

Models platform sizes 400 x 500 mm and 500 x 650 mm

3.1 Selecting the site of installation

3.2 Package volume

the weighing platform under maxi­mum load at the points of support.
At the same time it should be so
stable that no vibrations arise dur­ing weighing. This is also to be ob­served when installing the weighing
platform in conveyor and similar
systems.

• If possible, vibrations from neigh-
boring machines should not occur
at the site of installation.

• Platform

3.3 Protect screw

• Protect screw

• Operation Manual

KXP V20_6-300-IA-e-1511 4

Observe the following ambient conditions:

Models platform sizes 240 x 300 mm and 300 x 400 mm

3.4 Packaging / return transport

 Keep all parts of the original packaging for a pos-

3.5 Ambient conditions

Do not use the weighing platform in wet or corrosive environments. Never immerse
electronic products into liquids.

sibly required return.

 Only use original packaging for returning.
 Reattach supplied transport securing devices.
 Secure all parts against shifting and damage.

 No direct sunshine
 No strong draught
 No excessive temperature fluctuations
 Temperature range –10 °C to +40 °C.

5 KXP V20_6-300-IA-e-1511