Kern FKB, DS100, DS150, DS65, DS36 Service Manual
...
GB
KERN 572/573/KB/DS/FKB
Version 5.1 05/2006
Operating Instructions
Electronic Precision and Platform Balances
Table of contents:
1 MODE - MENUE __________________________________________________________ 26
2 Technical data_____________________________________________________________ 27
2.1 KERN 572 __________________________________________________________________ 27
2.2 KERN 573 __________________________________________________________________ 28
2.3 KERN KB __________________________________________________________________ 29
2.4 KERN FKB _________________________________________________________________ 29
2.5 KERN DS___________________________________________________________________ 30
3 Fundamental information (general) ___________________________________________ 31
3.1 Intended use_________________________________________________________________ 31
3.2 Inappropriate use ____________________________________________________________ 31
3.3 Guarantee __________________________________________________________________ 31
3.4 Monitoring the test substances__________________________________________________ 31
4 Fundamental safety information ______________________________________________ 32
4.1 Observe the information in the operating instructions ______________________________ 32
4.2 Staff training ________________________________________________________________ 32
5 Transport and storage_______________________________________________________ 32
5.1 Acceptance check ____________________________________________________________ 32
5.2 Packaging___________________________________________________________________ 32
6 Unpacking, installation and commissioning _____________________________________ 32
6.1 Place of installation, place of use ________________________________________________ 32
6.2 Unpacking __________________________________________________________________ 33
6.2.1 Installation _______________________________________________________________________ 33
6.3 Mains supply ________________________________________________________________ 33
6.4 Connecting peripheral equipment_______________________________________________ 33
6.5 Initial start-up _______________________________________________________________ 33
6.6 Adjustment _________________________________________________________________ 33
6.7 Adjusting ___________________________________________________________________ 33
6.7.1 Adjusting for verification (KERN 573) _________________________________________________ 34
6.8 Verification _________________________________________________________________ 34
24
572/573/KB/DS/FKB-BA-defsi-0651
7 Operation_________________________________________________________________ 35
7.1 Display control panel _________________________________________________________ 35
7.2 Operation___________________________________________________________________ 36
7.2.1 Weighing with Tare ________________________________________________________________ 36
7.2.2 Count – Selection Preference Piece ____________________________________________________ 36
7.2.3 Percent % ________________________________________________________________________ 36
7.2.4 Formula Weighing _________________________________________________________________ 36
7.2.5 Tolerance Weighing ________________________________________________________________ 36
7.2.6 Adjust ___________________________________________________________________________ 38
7.2.7 Preselect Tare _____________________________________________________________________ 38
7.2.8 Auto Tare ________________________________________________________________________ 38
7.2.9 Speed ___________________________________________________________________________ 38
7.2.10 Auto Off_______________________________________________________________________ 38
7.2.11 Variable Factor__________________________________________________________________ 38
7.2.12 Preselect Unit___________________________________________________________________ 38
7.3 Interface RS 232 C ___________________________________________________________ 40
7.4 RS 232 C Data output via interface RS 232 C _____________________________________ 40
7.4.1 There are 4 methods for the data output via RS 232 C______________________________________ 40
7.4.2 Description of the data transfer________________________________________________________ 41
7.4.3 Numerator________________________________________________________________________ 41
7.5 Printer _____________________________________________________________________ 41
7.6 Underfloor weighing __________________________________________________________ 41
8 Maintenance, upkeep, disposal________________________________________________ 42
8.1 Cleaning ____________________________________________________________________ 42
8.2 Maintenance, upkeep _________________________________________________________ 42
8.3 Disposal ____________________________________________________________________ 42
9 Troubleshooting ___________________________________________________________ 42
10 Declaration of conformity__________________________________________________ 43
572/573/KB/DS/FKB-BA-defsi-0651
25
1 MODE - MENUE
MO DE
CAL?
Mod e
COUNT?
% ?
AUTOTARE?
FAST 3
AUTO OFF?
Variable Factor ?
Presel ect Un i ts ?
N/Y
Mod e
N/Y
Mod e
Presel ect Tare?
Mod e
N/Y
Mod e
Mod e
N/Y
Mod e
Mod e
Mod e
Y
PLACE CAL
WEIGHT
REF=1
Y
Mode Esc
REF = 5
Mode Esc
REF=10
Mode Esc
REF=20
Mode Esc
Y
1 l 0.000g
Y N - -
1 l 0.000g
Y
Y N - -
g
Y
Mode Esc
N/Y
N/Y
N/Y
N/Y
Mode
Mode
N/Y
Manufacture Setting:
Count?: YES
REF10: YES
9600bd: YES
Preselect
Units?: g/kg
Autotare: YES
Fast: 3
PRINTER?
Mod e
g, kg, oz, ozt,
mo, m, b,
b
N/Y
Mode Esc
2400Bd
Y
Mode Esc
4800Bd
Mode Esc
9600Bd
Mode Esc
19200Bd
Mode Esc
Numerator
Mode Esc
AUTOPRINT
Mode Esc
AUTOP RT P C
Mode Esc
*, dwt, GN,
lb, ct, tLT,
tLH, tLM,
tLS, tL, t,
N/Y
N/Y
N/Y
N/Y
N/Y
o,
N/Y
N/Y
26
weighing
572/573/KB/DS/FKB-BA-defsi-0651
2 Technical data
2.1 KERN 572
KERN 572-31 572-33 572-35 572-45 572-49 572-57
Readout 0,001 g 0,01 g 0,01 g 0,1 g 0,1 g 0,2 g
Weighing range 161 g 1.210 g 1.510 g 12.100 g 15.100 g 20.100 g
Taring range (subtractive) 161 g 1.210 g 1.510 g 12.100 g 15.100 g 20.100 g
Reproducibility 0,001 g 0,01 g 0,01 g 0,1 g 0,1 g 0,2g
Linearity ±0,003 g ±0,03 g ±0,03 g ±0,3 g ±0,3 g ± 0,6 g
Minimum weight for
counting parts
Test weight (included)
tolerance as per M1
Recommended adjusting
weight F2
Verifiable No No No No No No
Stabilisation time (typical) 3 sec.
Permissible ambient temperature +10 °C ... + 40 °C
Casing (W x H x D) mm 180 x 310 x 90
Weighing plate mm Ø 106 Ø 150 Ø 150 160 x 200
Net weight kg 4
Interface Yes (RS232)
0,001 g 0,01 g 0,01 g 0,1 g 0,1 g 0,2 g
50 g (F1)
100g 1 kg 1 kg 10 kg 10 kg 10 kg
500 g 500 g 5.000 g 5.000g 5.000 g
572/573/KB/DS/FKB-BA-defsi-0651
27
2.2 KERN 573
KERN 573-46 573-52
Class of accuracy II II
Readout (d) 0,1 g 0,2 g
Verification value (e) 1g 2g
Weighing range (max.) 6500 g 13000 g
Minimum load (Min) 5g 10g
Taring range (subtractive) 6500 g 13000 g
Reproducibility 0,1 g 0,2 g
Linearity ±0,2 g ±0,4 g
Minimum weight for counting parts 0,3 g 0,6 g
Test weight (included) tolerance as per M1 5000 g 5000 g
Recommended adjusting weight F2 5 kg 10 kg
Verifiable Yes Yes
Air humidity max. 80 % relative (not condensing)
Stabilization time 2 sec.
Permissible ambient temperature 0° C to + 50° C
Temperature range for verifiable applications +10 °C ... + 40 °C
Casing (W x H x D) mm 180 x 310 x 90
Weighing plate mm 160 x 200 160 x 200
Data interface Yes (RS232)
Weighing units g, kg
Vibratory filter Yes
Net weight (kg) 4
28
572/573/KB/DS/FKB-BA-defsi-0651
2.3 KERN KB
KERN KB100-3 KB1000-2 KB10000-1
Readout 0,001 g 0,01 g 0,1 g
Weighing range 101 g 1010 g 10.100 g
Taring range (subtractive) 101 g 1000 g 10.100 g
Reproducibility 0,001 g 0,01 g 0,1 g
Linearity ±0,003 g ±0,03 g ±0,3 g
Minimum weight for counting parts 0,001 g 0,01 g 0,1 g
Test weight (included) tolerance as per M1 50 g 200 g 1.000 g
Adjusting weight (not included)tolerance as per
F2
Verifiable No No No
Stabilisation time (typical) 3 sec.
Permissible ambient temperature + 10° C … + 40° C
Casing (W x H x D) mm 165 x 230 x 85
Weighing plate mm Ø 85 130 x 130 150 x 170
Net weight kg 1,8 2,7
Data interface Yes (RS232)
100 g F1 1000 g 10.000 g
2.4 KERN FKB
KERN
Readout 0,05 g 0,1 g 0,2 g 0,5 g 1 g
Weighing range 4.100 g 8.100 g 16.100 g 36.100 g 65.100 g
Taring range (subtractive) 4.100 g 8.100 g 16.100 g 36.100 g 65.100 g
Reproducibility 0,05 g 0,1 g 0,2 g 0,05 g 1 g
Linearity 0,15 g 0,3 g 0,6 g 1,5 g 3 g
Minimum weight for
counting parts
Adjusting weight (not
included ) tolerance as
per F2
Air humidity max. 80% relative (not condensing)
Verifiable No
Stabilisation time (typical) 2 sec.
Permissible ambient
temperature
Casing
(W x H x D) mm
Weighing plate mm 340 x 240
Vibratory filter Yes
Net weight kg 6,5
Data interface Yes (RS232)
FKB 4K0.5 FKB 8K0.1 FKB 16K0.2 FKB 36K0.5 FKB 65K1
0,05 g 0,1 g 0,2 g 0,5 g 1 g
2 kg 5 kg 10 kg 20 kg 50 kg
+ 10 °C ... + 40 °C
350 x 390 x 120
572/573/KB/DS/FKB-BA-defsi-0651
29
2.5 KERN DS
KERN
Readout 0,05 g 0,1 g 0,1 g 0,2 g 0,5 g 0,5 g 1g 1g 2g
Weighing range 4.100 g 8.100 g 8.100 g 16.100 g 36.100 g 36.100 g 65.100g 101.000g 151.000g
Taring range
(subtractive)
Reproducibility 0,05 g 0,1 g 0,1 g 0,2 g 0,5 g 0,5 g 1g 1g 2g
Linearity 0,15 g 0,3 g 0,3 g 0,6 g 1,5 g 1,5 g 3 g 3 g 6g
Minimum weight
for counting
parts
Adjusting weight
(not included )
tolerance as per
F2
Verifiable No
Stabilisation
time (typical)
Permissible
ambient
temperature
Vibratory filter
Casing
(W x H x D) mm
Weighing plate
mm
Net weight kg 5,5 8 12,5
Data interface Yes (RS232)
DS4
K0.05 S
4.100 g 8.100 g 8.100 g 16.100 g 36.100 g 36.100 g 65.100g 101.000g 151.000g
0,05 g 0,1 g 0,1 g 0,2 g 0,5 g 0,5 g 1g 1g 2g
2 kg 5 kg 5 kg 10 kg 10 kg 20 kg 50 kg 50 kg 50 kg
228 x 228 x 70
228x228
DS8
K0.1S
DS8
K0.1
2 sec.
DS16
K0.2
+ 10 °C ... + 40 °C
315 x 305 x 70
DS36
K0.5
Yes
DS36
K0.5L
315 x 305
DS65
K1
450 x 350 x 115
DS100
K1
DS150
K2
30
572/573/KB/DS/FKB-BA-defsi-0651
Loading...