Keri Systems PXL-500P, PXL-500W Specsheet

PXL-500/510 Tiger II Controller and

SB-593 Satellite Expansion Board

• Sophisticated Hardware Platform that reduces the total
installed cost of access control

• 100% Distributed Intelligence, Expandable 1 or 2 Doors
at a Time

• PXL-510 with Extra Serial Port provides alarm
system control capability (arming and
disarming)

• Great Installer Features Including Self­Configuring Hardware with No Jumper Settings, Digital Address Selection and
Readout without DIP Switches, Quick Disconnect Terminals, and on-Board Diagnostics

• RS-485 Networking, 256 door/65,000 User Capacity

• RS-232 Port for direct PC, TCP/IP or Modem Connection, 5 Year Memory Retention

• Compatable with existing PXL-250 Systems

Keri's PXL-500 Tiger II Controller hardware platform provides sophisticated access control solutions for up to 256
doors at a single site and thousands of doors spread over a number of remote sites. The unique architecture and
latest multiprocessor, RISC-based design techniques allow Keri to offer the system hardware at a lower cost
compared to other manufacturers. It also contains many features that simplify and significantly reduce the cost of
installation. The system is managed by Keri's

The PXL-500 itself contains all the input/output functionality necessary to manage a single door (Lock Relay, Door
Sense, Request-to-Exit, and two reader inputs) as well as provide an alarm output. Each controller has an RS-485
port for connection to other PXL-500’s (up to 128 per network) and an RS-232 serial port for connection to a PC
which communicates with the first PXL-500 on the network. The PXL-500's two reader inputs can be configured
for either Keri's acclaimed
MS Readers, model PXL-500W for Wiegand-compatible readers.) The PXL-510 provides integration with the
NetworX (Caddx) NX-8E Alarm Panel such that users can disarm and arm the alarm system using the access
system’s readers.

SB-593 Satellite Expansion Board plugs into the PXL-500 to provide additional functionality at a cost far less

The
than that of adding another controller. The SB-593 gives each PXL-500 an additional 8 general purpose inputs
and 4 general purpose outputs. Two of the inputs and outputs can be configured to manage a second door,
making the PXL-500 a cost effective two door controller while still providing an additional 6 inputs and 2 outputs.

MS Series Proximity Readers or any Wiegand-compatible device (model PXL-500P for

Doors™ for use with Windows™ software.

2305 Bering Drive, Ste A
San Jose, CA 95131 U.S.A.
[phone] • [phone] • Fax [phone]
e-mail: [e-mail] web: www.kerisys.com

ARM

DISARM

ACCESS CONTROL

SB-593 Satellite Expansion Board

DATA SHEET

PXL-500/510 Tiger II Controller &

PXL-500/510 Tiger II Controller and

SB-593 Satellite Expansion Board

SPECIFICATIONS:

ize(Enclosure)

S

3" H x 9" W x 4" D

1
(33.15 cm x 22.95 cm x 6.35 cm)

eight (In Enclosure)

W

.36 lbs (1.99) kg

4

Size (PC Board)

XL-500

P

5.6" H x 6.6" W x l.6" D

14.28 cm x 16.83 cm x 2.55 cm)

(

PXL-500 with SB-593

.6" H x 6.6" W x 1.8"D

5
(14.28 cm x 16.83 cmx 4.59 cm)

ower Requirements(max)

P

+12 VDC @ 125mA (PXL-500)

add 375mA for SB-593

nputs

I

PXL-500

oor Sense

D
Request to Exit
Auxiliary/External Time Zone
Card Reader (2), A & B

SB-593

General Purpose (8), 2 are configurable as
request to exit and door sense for 2nd door

Outputs

PXL-500

Form C Lock Relay (3 Amp)
Form C Alarm Relay (3 Amp)
RS-232 Serial Port (DB-9M)
Output for Optional LCD Display

SB-593

Form C Relay, 3A (4), 2 are configurable as
lock and alarm outputs tied to B reader port

Buffer Capacity

65,000 Cardholders
3,600 Events

Temperature/Humidity

32˚F to 140˚F
(0˚C to 60˚C)
0-90% Non Condensing

Communication

Between Controllers: RS-485, 9600 Baud
PC to Master: RS-232

Lithium Battery

5 Years Memory Retention

RS-485

Communication

Power in 12VCD

Lock and Alarm

Relay Outputs

Door Sense

Switch, Request to

Exit, and Auxiliary

Inputs

SB-593 Satellite

Board Connector

2nd Door Control and

2nd Alarm Relay Outputs

2 General Purpose Outputs

2nd Door Sense and

Request to Exit Inputs

2 General Purpose Inputs

2 Extra General Purpose Inputs

4 General Purpose Inputs

OR

OR

and

PXL-500

SB-593

2 General Purpose Outputs

LAN

Connection

Status LED’s

Power

LED

Net Comm

LED

Reset

Jumper

Address

Display

Address &

Diagnostic

Button

Presented By:

April 2003