Keri Systems PXL-500 Installation Guide
PXL-500 Tiger Controller
Installation Guide
Section 1 - PXL-500 Tiger Controller
Section 2 - Reader Connection
Section 3 - Modem/DB-9M to PXL/TB-12 Serial Port Connection
Section 4 - Resetting the Controller's RAM
Section 5 - Contact Keri Systems
1.0 PXL-500 Tiger Controller
This document contains basic information for the installation of the PXL-500 Tiger Controller. For complete information,
see the PXL-500/PXL-510 Tiger Controller Quick Start Guide
(P/N 01918-001).
Figure 1: The PXL-500/PXL-510 Controller
Page 1 of 4 P/N: 01530-001 Rev. B
PXL-500 Tiger Controller
Installation Guide
2.0 Reader Connection
Figure 2
3.0 Modem/DB-9M to PXL/TB-12 Serial Port Connection
The Keri Systems part number for this cable is KDP-929M. To use the KDP-929M, cut off one end of the cable and wire
it to the TB-12 connector as shown in Figure 3.
Figure 3: Modem/DB-9M to PXL/TB-12 Serial Port Connection
Page 2 of 4 P/N: 01530-001 Rev. B
Loading...