NXT-6RK Proximity Reader and Keypad
• For Card+PIN applications
Data Sheet
• Mounts directly to a standard, USA junction box,
either metal or plastic
• Blue backlighting, provides enhanced visibility in
dark locations
• Tactile feedback, provides positive feedback on
key activation
• Beeper and LED standard
• Black and off-white covers in every box
Keri’s NXT-6RK is the newest member of the NXT Series
Proximity Reader family. The NXT-6RK may be mounted
directly to standard U. S. A. sized single-gang wall boxes, and
is ideal for applications requiring an access credential and/or
personal identification number (PIN), such as high security dual
verification. It connects to an NXT Controller via the NXT-RM-3
Reader Interface Module to allow the Wiegand format keypad
data to be read by the controller while at the same time reading standard NXT formatted cards.
The NXT-6RK and NXT-RM3 are sold as a kit together (NXT-KPK) as well as individually.
Keypad data is transmitted via the reader’s data lines in either an 8-Bit Burst or 26-Bit Wiegand data
format, depending upon the PIN length required by the customer. The alpha-numeric keypad itself
makes use of a durable (no moving parts), non-mechanical capacitive technology. It includes advanced
enhancements including blue backlighting and a continuously illuminated 5-key, both for orientation
at night, tactile feedback, and a raised ‘pip’ on the 5-key for use by visually impaired individuals.
NXT Series 6RK Proximity Reader and Keypad
The single-piece NXT-6RK delivers non-contact read ranges up to 6 inches (152 mm), and is powered
by the controller. Physical size is a compact 4.6 x 3 x 0.70 inches (117 x 77 x 18 mm). Mounting is
simplified with horizontal and vertical mounting slots instead of holes which allows the reader to be
conveniently adjusted and leveled. To allow both indoor and outdoor operation the electronics are
sealed in tamper resistant epoxy potting. Concealing the mounting hardware, the NXT-6RK ships with
both black and white covers standard to match building decor.
2305 Bering Drive l San Jose, California 95131
408-435-8400 l Toll Free: 800-260-5265 l Fax: 408-577-1792
e-mail: sales@kerisys.com web: www.kerisys.com
NXT-6RK Proximity Reader and Keypad
3.00" (77 mm)
4.6" (117 mm)
Cover snaps onto Base.
Insert screwdriver blade here
to remove Cover from Base.
Reader Cover
0.70"
(18 mm)
Size
4.6” H x 3.0” W x 0.7” D (11.7 cm x 7.7 cm x 1.8 cm)
Weight
4 oz. (113 g)
Read Range
a
w/ NXT-C - Up to 6 inches (15.2 cm)
w/ NXT-I/S - Up to 4 inches (10.2 cm)
w/ NXT-K - Up to 3 inches (7.6 cm)
Input Power
b
+5 to +14 VDC
30 mA minimum, 50 mA typical, 115 mA peak
Operating Temperature
-40° F to 149° F (-40° C to 65° C)
Cable Routing Distance
500’ maximum cable distance (150 m)
Reader Base
7/8" Dia
(22 mm)
Drill Size for
Cable & Beeper
Access Hole
SPECIFICATIONS
Keypad Formats
8-bit Burst (default), 26-bit Wiegand
LED Indicator
Tri-Color Standard (Red, Green, Amber, Off)
Audio Tone
Standard
Bezel Colors
Black and Off-White
Metal Mounting
May be mounted directly to metal
Certifications
FCC, CE, C-Tick
Warranty
Limited Lifetime Warranty against defects in materials
and workmanship
1.5" (38.10 mm)
3.125"
(79 mm)
3.314"
(84 mm)
0.625"
(15.87 mm)
3.939"
(100.05 mm)
Base mounting measurements
include Cover size in dimensions.
c
d
a) Read range is stated in a clean RF and electrical environment using NXT-C cards presented parallel to the reader surface with the reader
operating at 12 VDC. Read range may be affected by local installation conditions. Read range will be less when mounted on metal.
b) The use of a linear power supply is always recommended.
c) The NXT-6RK Keypad Reader may be used as a keypad only device.
d) For user orientation in non-illuminated areas the 5-Key is always illuminated.
Presented By:
P/N 01788-006 Rev. C
Loading...