MS-4000 Shooting Star™Proximity Reader
Vandal Resistant Proximity Reader for High Crime Areas
• Bullet proof and flame resistant
• Designed for high crime areas where vandalism
is a problem
• Virtually impossible to pry off a wall or mullion
• Perfect for inner city housing projects
• Field proven in the toughest environments
The MS-4000 ShootingStar™ Proximity Reader is designed for areas where crime and
vandalism are a constant threat to the access control system’s card readers. The outside
housing is made of stainless steel and is beveled such that it is nearly impossible to get
sufficient leverage to pry it off a wall or mullion. The portion of the face of the reader that
covers the electronics consists of a material that is many layers of interwoven fiberglass
(UL 752 listed for bulletproof integrity). The reader can withstand 9mm bullets a
“point-blank” firing range and will not be burned by common cigarette lighters, both which
are typical sources of vandalism.
MS-4000 is typically used in applications where other types of readers (including
The
proximity) have failed due to vandalism to the reader itself. Many applications do not lend
themselves to concealment of a reader inside or behind a wall, so the reader must be
exposed to the environment. Exposed readers traditionally have invited vandalism, resulting
in higher cost to the building owner because of constant replacement, inconvenience and
lack of security for users due to system down time. The
to function in open hostile environments.
MS-4000 is field proven in its ability
DATA SHEET
Vandal Resistant Proximity Reader for High Crime Areas
MS-4000 Shooting Star
2305 Bering Drive, Ste A
San Jose, CA 95131 U.S.A.
(800) 260-5265 • (408) 435-8400 • Fax (408) 577-1792
e-mail: sales@kerisys.com web: www.kerisys.com
™
Proximity Reader
MS-4000 Shooting Star™Proximity Reader
Vandal Resistant Proximity Reader for High Crime Areas
Specifications
Size
5.25 x 2.0 x 0.75 inches
(134 x 51 x 19mm)
Weight
15.4 oz. (431g)
Read Range*
Up to 2 inch (50mm)
Input Voltage**
+11-14 VDC
Current Draw
80 mA typical
Operating Temperature
-40º C to +65º C
LED Indicator
Not Applicable
Audio Tone
Not Available
Frequency
125 KHz excitation
Color
Stainless Steel
Material
Surround: Stainless Steel
Face: Fiber-Tex®(UL 752 listed)
Warranty
The MS-4000 carries a limited lifetime
warranty against defects in materials and
workmanship.
Specifications subject to change without notice.
* Read range is stated in a clean RF and electrical environment using
KC-10X Proximity Card presented parallel to reader surface with
reader operating at 12VDC. The PKT-10X Key Tag is the preferred
credential.
Presented By:
January 2003
Loading...