KEPCO RKW-100L User Manual

INSTRUCTION MANUAL

KEPCO

An ISO 9001 Company.

DIN-RAIL MOUNTING KIT

FOR SERIES RKW 100W

DESCRIPTION. Kepco KIT, Model DIN RKW-100L con-

tains two preassembled mounting clips and associated
hardware used to install RKW 100 Watt Series power
supplies on a DIN rail. The -100 suffix is for the 100 Watt
Series. The “L” suffix is for mounting along the long
dimension (length) as shown in Figure 1. Outline dimen­sions are shown in Figure 4

TABLE 1. COMPONENTS SUPPLIED

KIT

MODEL NO.

DIN RKW-100L CA 35 128-2128 108-0362

COVER

PAR T N O .

MOUNTING PLATE

PART NO.

CLIP (QTY 2)

PART NO.

KIT

DIN RKW

-100L

FIGURE 1. L SUFFIX ORIENTATION

SCREW (QTY 2)

PAR T N O .

501-0075

(M4 X 8 FLPH)

WASHER (QTY 2)

PART NO.

103-0017

(NO. 8, INT. TOOTH)

INSTALL COVER. Attach the cover to the power supply per instruction manual supplied with the cover.

INSTALLING KIT. Attach the preassembled mounting clips to the power supply using the hardware supplied (see Fig-

ure 3). The clips may be mounted with the release lever on either side to facilitate removal.

INSTALLING POWER SUPPLY ON DIN RAIL. To mount the power supply on the rail insert one end of both clamps
under one edge of the rail, then snap the other end of the two clips into place (see Figure 2A).

REMOVING POWER SUPPLY FROM DIN RAIL. While grasping the power supply with one hand, use a screwdriver to
apply leverage towards the left as shown in Figure 2B to disengage each clip from the rail. Where mounting clips are
close together, it may be necessary to apply leverage with two screwdrivers simultaneously.

A —

INSTALLATION

B —

REMOVAL

FIGURE 2. INSTALLATION AND REMOVAL OF POWER SUPPLY FROM DIN RAIL

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL [phone] "

http://www.kepcopower.com " email: [e-mail]

©2004, KEPCO, INC
Data subject to change without notice 228-1458

FAX [phone]

1

FIGURE 3. INSTALLATION OF KIT ON RKW POWER SUPPLY

FIGURE 4. RKW 100W POWER SUPPLY WITH KIT INSTALLED, OUTLINE DIMENSIONS

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL [phone] "

2

http://www.kepcopower.com " email: [e-mail]

228-1458 021304

FAX [phone]