KEPCO RAX-RTW 300H User Manual

INSTRUCTION SHEET

KEPCO

An ISO 9001 Company.

MA

RAX/RTW

300H

MOUNTING ADAPTER RAX/RTW 300H

DESCRIPTION. The RoHS-compliant Model MA RAX/RTW 300H Mounting Adapter includes an adapter plate and

mounting screws that allow a 300W RTW power supply to be easily substituted for a horizontally-mounted 300W
RAX power supply. Mount the adapter plate to the RTW power supply using the screws provided (see Figure 1), then
install the adapter plate in place of the RAX power supply using the screws that previously secured the RAX power
supply.

RTW 300W

POWER SUPPLY

4.724

[120.0]

SPACER (3)

P/N 104-0312

SEE

NOTE 1.

SCREW (3)

P/N 101-487

(M4 X 10MM, FLPO)

SEE NOTE 1.

SEE

NOTES

2 AND 3.

B

A

SEE

NOTES

2 AND 3.

B

A

B

AB

SEE

NOTE 1.

NOTES:

1. MOUNT ADAPTER PLATE TO RTW USING THREE SCREWS
AND THREE SPACERS AT "A" HOLES AS SHOWN.

2. INSTALL ADAPTER PLATE WITH RTW ATTACHED USING "B" HOLES
AND FOUR SCREWS PREVIOUSLY USED TO MOUNT RAX POWER
SUPPLY (NOT SUPPLIED).

1.821

[46.25]

9.843

[250.00]

ADAPTER PLATE

P/N 128-2322

3043288

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11355 U.S.A. " TEL [phone] " FAX [phone]

©2008, KEPCO, INC
Data subject to change without notice

3. MAX. PENETRATION AT "B" (SCREW 8-32) MUST NOT EXCEED
5MM.

FIGURE 1. ADAPTER PLATE INSTALLATION

http://www.kepcopower.com " email: [e-mail]

228-1652 REV 1 060508