KEPCO RAX-RTW 100H User Manual

INSTRUCTION SHEET

KEPCO

An ISO 9001 Company.

MA

RAX/RTW

100H

MOUNTING ADAPTER RAX/RTW 100H

DESCRIPTION. The Model MA RAX/RTW 100H Mounting Adapter includes an adapter plate and mounting screws

that allow a 100W RTW power supply to be easily substituted for a horizontally-mounted 100W RAX power supply.
Mount the adapter plate to the RTW power supply using the screws provided (see Figure 1), then install the adapter
plate in place of the RAX power supply using the screws that previously secured the RAX power supply.

RTW 100W

NOTES:

1. MOUNT ADAPTER PLATE
TO RTW POWER SUPPLY
AT HOLES "A" USING
TWO SCREWS.

2. INSTALL ADAPTER PLATE
WITH RTW POWER SUPPLY
ATTACHED USING HARDWARE
PREVIOUSLY USED TO
MOUNT RAX POWER SUPPLY
(NOT SUPPLIED) AT HOLES "B."

4.330
[109.98]

B

B

A

A

B

B

7.639 [194.03]

ADAPTER PLATE
P/N 128-2299

SCREW (2)
P/N 101-0487
(M4 X 10MM, FLPO)

3043171

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL [phone] " FAX [phone]

©2007, KEPCO, INC
Data subject to change without notice

1.055
[26.80]

FIGURE 1. ADAPTER PLATE INSTALLATION

http://www.kepcopower.com " email: [e-mail]

228-1622 041107