KEPCO RAB-40RKW1500 User Manual

INSTRUCTION SHEET

KEPCO

An ISO 9001 Company.

RAB 40-RKW1500

INSTALLATION INSTRUCTIONS

RAB 40-RKW1500 MOUNTING BRACKET

DESCRIPTION

The Kepco Mounting Bracket Model RAB 40-RKW1500 is used to mount RKW 1500W power supplies in the RA 40
Rack Adapter. The RAB 40-RKW1500 consists of two mounting brackets and associated hardware.

INSTRUCTIONS (Refer to Figures 1 and 2.)

Attach power supply to mounting brackets using “B” holes and hardware indicated in Table 1 (see Figure 1 for loca­tion) and hardware supplied with power supply. Remove the front and rear panels of the rack adapter (screws “C”
Figure 2) Then attach mounting bracket to rack adapter rails (front and rear) using holes marked “A” in Figure 1.
Reinstall front and rear panels on rack adapter. Figure 2 shows power supply after installation.

TABLE 1. PARTS LIST

PARTS SUPPLIED

PART FUNCTION

Mounting bracket Mount RKW 1500 watt power supply to RA

40 rack adapter

Hardware (power
supply to mounting
bracket)

Hardware (mounting
bracket to rack
adapter)

* Two brackets required to install RKW 1500 watt power supplies.

Hardware to attach RKW* 1500 power
supply to mounting brackets.

Hardware to attach RAB 40-RKW1500
mounting brackets to RA 40 rack adapter

ITEM KEPCO P/N

(2) Bracket 128-2105

(8) Machine Screws (M4 x 8) 501-0035

(8) Machine Screws (6-32 x 1/2, RHPH) 101-0154 A

(8) Flat Washers (#6) 103-0028 A

(8) Int. Lock Washers (#6) 103-0015 A

Use Holes

(see Figure 1)

B

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL [phone] " FAX [phone]

©2002, KEPCO, INC
Data subject to change without notice

FIGURE 1. KEPCO MOUNTING BRACKET MODEL RAB 40-RKW1500

http://www.kepcopower.com " email: [e-mail]

228-1435

FIGURE 2. INSTALLATION OF RKW 1500W POWER SUPPLY IN RA 40 RACK ADAPTER

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL [phone] " FAX [phone]

http://www.kepcopower.com " email: [e-mail]

2 228-1435 081406