KEPCO FPD 10 User Manual

OPERATOR’S MANUAL

FPD 10 WATT

POWER SUPPLY

Flat Pack Dual Output DC to DC Converter

10 Watts, Dual Output

36 to 72 Vdc Nominal Input

KEPCO INC.

An ISO 9001 Company.

IMPORTANT NOTES:

1) This manual is valid for the following Model and associated serial numbers:

MODEL SERIAL NO. REV. NO.

2) A Change Page may be included at the end of the manual. All applicable changes and
revision number changes are documented with reference to the equipment serial num­bers. Before using this Operator’s Manual, check your equipment serial number to identify
your model. If in doubt, contact your nearest Kepco Representative, or the Kepco Docu­mentation Office in New York, [phone], requesting the correct revision for your par­ticular model and serial number.

3) The contents of this manual are protected by copyright. Reproduction of any part can be
made only with the specific written permission of Kepco, Inc.

Data subject to change without notice.

MODEL

FPD 10 WATT

POWER SUPPLY

©2007, KEPCO, INC.
P/N 243-0805

KEPCO, INC. ! 131-38 SANFORD AVENUE ! FLUSHING, NY. 11355 U.S.A. ! TEL [phone] ! FAX [phone]

KEPCO®

THE POWER SUPPLIER™

email: [e-mail] ! World Wide Web: http://www.kepcopower.com