KEPCO FCP-10P User Manual

INSTRUCTION MANUAL

KEPCO

An ISO 9001 Company.

DIN-RAIL MOUNTING KIT

FOR SERIES FMP/FCP 3W, 10W

DESCRIPTION. Kepco Kits, Models DIN FMP/FCP

-3P and -10P each contain a preassembled mounting
bracket with two mounting clips and associated hard­ware used to install FMP and FCP Series power sup­plies on a DIN rail. The -3 suffix is for the 3 Watt
Series, the -10 suffix is for the 10 Watt Series. The “P”
suffix is for mounting the power supply perpendicular
to the DIN rail as shown in Figure 1. Outline dimen­sions are shown in Figure 4.

TABLE 1. COMPONENTS SUPPLIED

KIT

MODEL NO.

DIN FMP/FCP-3P 128-2052 108-0366

MOUNTING

BRACKET

PART NO.

CLIP (QTY 2)

PART NO.

DIN FMP/FCP

-3P, -10P

FIGURE 1. P SUFFIX ORIENTATION

SCREW (QTY 2)

PART NO.

101-0092

(4-40 X 0.312 BHPH)

WASHER (QTY 2)

PAR T N O .

103-0097

(NO. 4, SPLIT, LOCK)

KIT

DIN FMP/FCP-10P 128-1988 108-0366

INSTALLATION

1. INSTALL MOUNTING BRACKET. Attach the mounting bracket to the power supply using hardware sup-
plied (see Figure 2).

2. INSTALL POWER SUPPLY ON DIN RAIL. To mount the power supply on the rail insert one end of both
clips under one edge of the rail, then snap the other end of the two clips into place (see Figure 3A).

101-0092

(4-40 X 0.312 BHPH)

103-0097

(NO. 4, SPLIT, LOCK)

FIGURE 2. INSTALLING MOUNTING PLATE ON POWER SUPPLY

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL [phone] " FAX [phone]

http://www.kepcopower.com "

©2000, KEPCO, INC
Data subject to change without notice 228-1368 (REV 3)

email: [e-mail]

1

REMOVING POWER SUPPLY FROM DIN RAIL. While grasping the power supply with one hand, Insert a screwdriver
into the access holes provided and apply leverage towards the left as shown in Figure 3B to disengage each clip from
the rail. Since mounting clips are close together, it may be necessary to apply leverage with two screwdrivers simulta­neously.

INSTALLATION

A

FIGURE 3. INSTALLATION AND REMOVAL OF POWER SUPPLY FROM DIN RAIL

B

REMOVAL

FIGURE 4. OUTLINE DRAWING

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL [phone] "

2

http://www.kepcopower.com " email: [e-mail]

228-1368 (REV 3) 101801

FAX [phone]