KEPCO FAW-RTW 150V User Manual

INSTRUCTION SHEET

KEPCO

An ISO 9001 Company.

MA

FAW/RTW

150V

MOUNTING ADAPTER FAW/RTW 150V

DESCRIPTION. The RoHS-compliant Model MA FAW/RTW 150V Mounting Adapter includes an adapter plate and

mounting screws that allow a 150W RTW power supply to be easily substituted for a vertically-mounted 150W FAW
power supply. Mount the adapter plate to the RTW power supply using the screws provided (see Figure 1), then
install the adapter plate in place of the FAW power supply using the screws that previously secured the FAW power
supply.

RTW 150W

A

SEE NOTE 3.

SPACER (3)

P/N 104-0312

(FOR M4 SCREW)

SCREW (3)

P/N 101-0487

(M4 X 10MM ST. FLPO)

3043306

ADAPTER PLATE

P/N 128-2323

3.883

[97.36]

7.677 [195.0]

A

SEE NOTE 3.

NOTES:

1. MOUNT ADAPTER PLATE TO RTW USING THREE SCREWS AND THREE
SPACERS AS SHOWN.

2. INSTALL ADAPTER PLATE WITH RTW ATTACHED USING "A" HOLES
AND FOUR SCREWS PREVIOUSLY USED TO MOUNT FAW POWER
SUPPLY (NOT SUPPLIED).

3. MAX. PENETRATION AT "A" (SCREW 4-40) MUST NOT EXCEED
5MM.

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11355 U.S.A. " TEL [phone] " FAX [phone]

©2008, KEPCO, INC
Data subject to change without notice

FIGURE 1. ADAPTER PLATE INSTALLATION

http://www.kepcopower.com " email: [e-mail]

228-1651 REV 1 060508