Page 1
INSTRUCTION SHEET
KEPCO
An ISO 9001 Company.
MA
FAW/RKW
150V
MOUNTING ADAPTER FAW/RKW 150V
DESCRIPTION. The RoHS-compliant Model MA FAW/RKW 150V Mounting Adapter includes an adapter plate and
mounting screws that allow a 150W RKW power supply to be easily substituted for a vertically-mounted 150W FAW
power supply. Mount the adapter plate to the RKW power supply using the screws provided (see Figure 1), then
install the adapter plate in place of the FAW power supply using the screws that previously secured the FAW power
supply.
RKW 150W
A
SEE NOTE 3.
SPACER (3)
P/N 104-0312
(FOR M4 SCREW)
SCREW (3)
P/N 101-0487
(M4 X 10MM ST. FLPO)
3043250
ADAPTER PLATE
P/N 128-2305
3.883
[97.36]
7.677 [195.0]
A
SEE NOTE 3.
NOTES:
1. MOUNT ADAPTER PLATE TO RKW USING THREE SCREWS AND THREE
SPACERS AS SHOWN.
2. INSTALL ADAPTER PLATE WITH RKW ATTACHED USING "A" HOLES
AND FOUR SCREWS PREVIOUSLY USED TO MOUNT FAW POWER
SUPPLY (NOT SUPPLIED).
3. MAX. PENETRATION AT "A" (SCREW 4-40) MUST NOT EXCEED
5MM.
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11355 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
©2008, KEPCO, INC
Data subject to change without notice
FIGURE 1. ADAPTER PLATE INSTALLATION
http://www.kepcopower.com " email: hq@kepcopower.com
228-1643 REV 2 060508
Loading...