Kenyon 4BTC Mediterranean, 4BTC Caribbean, B44001, B43001 Installation Instructions Manual

®

™

KENYON

INSTALLATION

INSTRUCTIONS

for

KENYON

P.O. Box 925
#8 Heritage Park Road
Clinton, CT 06413 USA
Phone: [phone]
Fax: [phone]



Lite-Touch

Touch Control

Glass Ceramic Cook-tops

Models:

4BTC Mediterranean

4BTC Caribbean

(B44001 & B43001)

Revision 9/16/02
Part # 006633

\\Mrpserver\KENYON ENGINEERING\MANUALS\4BTC MARINE

Thank you for purchasing a Kenyon glass ceramic cook-top. Kenyon glass ceramic cook-tops
feature good looks and an easy-to-use surface that stays clean and stays looking like new with
very little maintenance. These cook-tops are designed for recess countertop installation

Installation Instructions for Kenyon Ceramic Glass Cook Tops

Important- Save these instructions for the local inspector’s use.

!

Step # 1- Unpacking Your Kenyon Cook Top

Carefully unpack your Kenyon cook-top from its shipping container. Do not discard shipping
carton or protective foam. It may be useful if your unit ever needs to be serviced.

Verify and identify package contents. The following items should be included in carton:

1- Ceramic Glass Cook-Top 1- Cutout Template
1- Glass Cleaner 1- Package of Mounting Screws
2- Mounting Brackets (Long & Short)

If any components are missing or damaged, please contact factory.

Proper installation- Be sure your appliance is properly installed and grounded by a
qualified technician. Please read these instructions in their entirety before installation and
operation of cook-top.

Mounting Brackets

Ceramic Glass Cook Top

Glass Cleaner

Screws/Hardware

2

!

PLEASE RECORD YOUR COOK TOP SERIAL # HERE FOR FUTURE REFERENCE:

Important: Do not remove clear plastic covering film on ceramic glass until cook top is
ready to install.

Step #2- Check Your Electrical Supply Requirements:

This product must be installed in accordance with national electric codes, as well as state and
local codes. The following table provides the correct voltage, amperage, and frequency that
must be supplied to the appliance.

Kenyon Part #

B43001 4BTC-Car 5800 Watts 240 VAC/30A/60 Hz #10 AWG
B44001 4BTC-Med 5800 Watts 240 VAC/30A/60 Hz #10 AWG

The supply must be from an individual grounded circuit that is protected by a circuit breaker
rated per the specifications for the various models as shown in the table above.

Warning: If the electric power supply provided does not meet the product

!

specifications, call a licensed electrician before proceeding with installation.

Model

Max

Connected

Load

Required Power

Supply Input

Minimum

Wire Size

Step #3- Power Disconnection:

Disconnect power to the appliance by opening the circuit breaker before proceeding any further
with installation. Failure to disconnect power supply may result in electrical shock or fire
hazard.

3