KENXINDA TECHNOLOGY E7 User Manual

User Manual

Model:E7 Dual Sim

Brand:KENXINDA

Declaration

Please read the user’s manual so as to keep your mobile phone in the best condition. The manual has been verified and reviewed to guarantee the accuracy. Instructions and

descriptions contained herein are accurate at the time of publication. However, mobile phones

developed afterwards and the contents of their manual are subject to modification without further

notification. Our company reserves the rights in relation to the manual.

CONTENT

1. Product introduce ................................................................................................................ 2

2. Set-up .................................................................................................................................... 3

3. Your Mobile Phone ................................................................................................................ 5

4. Function of main menu ................................................................................................. 6

5. About the battery ................................................................................................................ 11

6. Important safety instructions ................................................................................................. 11

1. Product introduce

 Platform information:

Spreadtrum SC7731

 ID diagram

5.0 enhanced version of the 1st - White

- -

5.0 Strengthening II - White

2. Set-up

 Inserting T card and SIM card

Ensure to turn off the equipment and disconnect with the charger before taking out the battery.

Ask your SIM card dealer whether he has provided SIM card service and the method of usage

who may be service provider or other dealers.

SIM card and its contacts are vulnerable to scratch or bending. Attention shall be attached

when use, insert or take out the card.

- -

 Inserting/taking out T-FLASH CARD

Only use approved and compatible T-FLASH card applicable to the mobile phone.

Approved memory card trade standard is applied; however, certain bands may not be completely

compatible with the mobile phone. Using incompatible memory card may damage not only the

card and the mobile, but also the data stored in the card.

1. Insert SD flash card to card slot

2. Take out SD flash card: open the back cover, remove battery can pull out the SD flash

card

 Charging the battery

Check the model number of the charger before using it to charge the mobile.

Only use approved battery, charger and accessories applicable to the specific mobile model.

Using other types of battery, charger and accessories may violate the certification or warranty

terms of the equipment and may result in danger.

Refer to the dealer for supply of relative approved accessories. Hold the plug to plug out

and cut off the power supply of accessories instead of pulling the power cord.

1. Plug the charger in an AC power socket.

2. The charger connector plug at the bottom of the side of the mobile phone

 Switching your mobile phone ON

Hold down the Power key to switch on the mobile phone and activate the operating system.

If the screen is automatically locked, please touch the Unlock key to unlock the screen.

 Switching your mobile phone OFF

Hold down the Power key for 2 second and then touch the “OFF” option on the screen.

- -

+ 11 hidden pages