Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new DVD Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your KENWOOD dealer for information or service on the product.
Model XXV-05V Serial number
To prevent injury and/or fire, take the following
precautions:
• Ensure that the unit is securely installed. Otherwise it
may fly out of place during collisions and other jolts.
• When extending the ignition, battery or ground wires,
make sure to use automotive-grade wires or other wires
with an area of 0.75mm
cable deterioration and damage to the cable coating.
• To prevent short circuits, never put or leave any metallic
objects (e.g., coins or metal tools) inside the unit.
• If the unit starts to emit smoke or strange smells, turn
off the power immediately and consult your Kenwood
dealer.
• Do not touch the liquid crystal fluid if the LCD is
damaged or broken due to shock. The liquid crystal fluid
may be dangerous to your health or even fatal.
If the liquid crystal fluid from the LCD contacts your body
or clothing, wash it off with soap immediately.
2CAUTION
2
(AWG18) or more to prevent
To prevent damage to the machine, take the
following precautions:
• Make sure to ground the unit to a negative 12V DC
power supply.
• Do not open the top or bottom covers of the unit.
• Do not install the unit in a spot exposed to direct sunlight
or excessive heat or humidity. Also avoid places with too
much dust or the possibility of water splashing.
• Do not subject the faceplate to excessive shock, as it is
a piece of precision equipment.
• When replacing a fuse, only use a new one with the
prescribed rating. Using a fuse with the wrong rating
may cause your unit to malfunction.
• To prevent short circuits when replacing a fuse, first
disconnect the wiring harness.
• Do not use any screws except for the ones provided.
The use of improper screws might result in damage to
the main unit.
• You cannot view video pictures whilst the vehicle is
moving. To enjoy TV/video pictures, find a safe place to
park and engage the parking brake.
NOTE
• If you experience problems during installation, consult
your Kenwood dealer.
• If the unit does not seem to be working right, try
pressing the reset button first. If that does not solve the
problem, consult your Kenwood dealer.
Audio units you can control from the
XXV-05V Receiver (As of January, 2005):
KDC-CX89, KDC-CX87, KDC-CX85, KDC-C719, KDC-C717,
KDC-C715, KDC-C669, KDC-C667, KDC-C665, KDC-C469,
KDC-C467, KDC-C465, KDC-D301, KTC-9090DAB,
KDV-C830, KDV-C840, KDV-C860, KTC-SR901, KTC-SR902,
KTC-SR903, KPA-SS100, KPA-CP100, KTC-WB100
(Set the "O-N" switch to "N" position if provided.)
Navigation units you can control from the
XXV-05V Receiver (As of January, 2005):
KNA-DV2100, KNA-DV3100, KNA-DV4100
Loading and Replacing the battery
1. Use two "AAA"-size batteries.
Slide the cover while pressing downwards to remove it
as illustrated.
2. Insert the batteries with the + and - poles aligned
properly, following the illustration inside the case.
2WARNING
Store unused batteries out of the reach of children. Contact
a doctor immediately if the battery is accidentally
swallowed.
Do not set the remote on hot places such as above the
dashboard.
• The provided batteries are intended for use in operation
checking, and their service life may be short.
• When the remote controllable distance becomes short,
replace both of the batteries with new ones.
Cleaning the panel and monitor
When the operator panel and monitor panels are dirty, wipe
and clean them using a soft cloth (such as a commercially
available silicon coated cloth). When contaminated
excessively, clean them using a cloth dipped in a neutral
detergent first, then remove the detergent using a dry
cloth.
Do not use a hard cloth and a volatile chemical (such as an
alcohol). If used, the panel surface may be scratched or
printed letters may be erased.
Reset button
Screen brightness during low temperatures
When the temperature of the unit falls such as during
winter, the liquid crystal panel's screen will become darker
than usual. Normal brightness will return after using the
monitor for a while.
4 English
Cleaning the disc slot
As dust can accumulate in the disc slot, clean it
occasionally. Your discs can get scratched if you put them
in a dusty disc slot.
Lens Fogging
Right after you turn on the car heater in cold weather, dew
or condensation may form on the lens in the disc player of
the unit. Called lens fogging, discs may be impossible to
play. In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not operate
normally after a whilst, consult your Kenwood dealer.
Region codes in the world
1
2
4
1
5
4
5
2
1
2
6
3
8
32
9
16:9 LB
The DVD players are given a region code according to the country or area it is marketed, as shown in the following map.
Icons on the DVD discs
IconDescription
Indicates the region code where the disc can be played.
Number of voice languages recorded with the audio function. The number in the icon indicates the number
of voice languages. (Max. 8 languages)
Number of subtitle languages recorded with the subtitle function. The number in the icon indicates the
number of subtitle languages. (Max. 32 languages)
Number of angles provided by the angle function. The number in the icon indicates the number of angles.
(Max. 9 angles)
Aspect ratios that can be selected. "LB" stands for Letter Box and “PS” for Pan/Scan. In the example on the
left, the 16:9 video can be converted into letter box video.
Unplayable discs
This player cannot play back any of the following discs.
• DVD-ROM/DVD-RAM discs• HQ-VCD discs
• CDV discs (Only the audio part can be reproduced)• CD-G/CD-EG/CD-EXTRA discs (Only the audio can be reproduced)
• Photo CD discs
Also, you cannot play back the DVD-R/RW and DVD+R/RW discs if not recorded in the DVD-Video or DVD-Audio format.
Restrictions due to difference between discs
Some DVD and VCD discs can be played only in
certain playback modes according to the intentions
of the software producers. As this player plays
discs according to their intentions, some functions
may not work as intended by you. Please be sure
to read the instructions provided with each disc.
When an inhibition icon is displayed on the
monitor, it indicates that the disc being played is
under the restriction as described above.
The illustrations of the display and the panel appearing in this
manual are examples used to explain more clearly how the
controls are used. Therefore, what appears on the display in the
illustrations may differ from what appears on the display on the
actual equipment, and some of the illustrations on the display
may represent something impossible in actual operation.
Inhibition
icon
Explanation of icons used on this manual
Indicates the key operation on the receiver.
Indicates the button you must touch.
Indicates the key or joystick operation on the remote
controller.
The initial value of each setup is shown.
Gives an additional information or an operation advice.
English 5
About discs
Handling discs
• Don’t touch the recording surface of the disc.
• CD-R/RW, DVD-R/RW, and DVD+R/RW are easier to
damage than a normal music CD. Use a CD-R/RW, DVDR/RW, or DVD+R/RW after reading the caution items on
the package etc.
• Don’t stick tape etc. on the disc.
Also, don’t use a disc with tape stuck on it.
When using a new disc
If the disc center hole or outside rim has burrs, use it after
removing them with a ball pen etc.
Burrs
Burrs
Removing discs
When removing discs from this unit pull them out
horizontally.
Discs that can’t be used
• Discs that aren’t round can’t be used.
• Discs with coloring on the recording surface or that are
dirty can’t be used.
• This unit can only play the CDs with .
It may not correctly play discs which do not have the
mark.
•A CD-R or CD-RW that hasn’t been finalized can’t be
played. (For the finalization process refer to your CDR/CD-RW writing software, and your CD-R/CD-RW
recorder instruction manual.)
Disc storage
• Don’t place them in direct sunlight (On the seat or
dashboard etc.) and where the temperature is high.
• Store discs in their cases.
Disc accessories
Don’t use disc type accessories.
Disc cleaning
Clean from the center of the disc and move outward.
6 English
Notes on playing MP3/WMA
This unit can play MP3 (MPEG1, 2 Audio Layer 3)/WMA.
Note, however, that the MP3/WMA recording media
and formats acceptable are limited. When writing
MP3/WMA, pay attention to the following restrictions.
Acceptable media
The MP3/WMA recording media acceptable to this unit are
CD-ROM, CD-R, and CD-RW.
When using CD-RW, do full format not quick format to
prevent malfunction.
Acceptable medium formats
The following formats are available for the media used in
this unit. The maximum number of characters used for file
name including the delimiter (".") and three-character
extension are indicated in parentheses.
• ISO 9660 Level 1 (12 characters)
• ISO 9660 Level 2 (31 characters)
• Joliet (64 characters)
• Romeo (128 characters)
Up to 170 characters can be displayed in the long file name
format. For a list of available characters, see the instruction
manual of the writing software and the section Entering file
and folder names below.
The media reproducible on this unit has the following
limitations:
• Maximum number of directory levels: 8
• Maximum number of files per folder: 255
• Maximum number of characters for folder name: 64
• Maximum number of folders: 100
MP3/WMA written in the formats other than the above
may not be successfully played and their file names or
folder names are not properly displayed.
Settings for your MP3/WMA encoder and CD
writer
Do the following setting when compressing audio data in
MP3/WMA data with the MP3/WMA encoder.
• Transfer bit rate: MP3: 32 —320 kbps
• Sampling frequency: MP3: 32, 44.1, 48 kHz
When you use your CD writer to record MP3/WMA up to
the maximum disc capacity, disable additional writing. For
recording on an empty disc up to the maximum capacity at
once, check Disc at Once.
Play mode may not be possible when portions of the
functions of Windows Media Player 9 or higher are used.
WMA: 48 —192 kbps
WMA: 32, 44.1, 48 kHz
Entering file and folder names
The code list characters are the only file names and folder
names that can be entered and displayed.
If you use any other character for entry, the file and folder
names are not displayed correctly. They may neither be
displayed correctly depending on the CD writer used.
The unit recognizes and plays only those MP3/WMA which
have the MP3/WMA extension (.MP3/.WMA).
A file with a name entered with characters not on the code
list may not play correctly.
Writing files into a medium
When a medium containing MP3/WMA data is loaded, the
unit checks all the data on the medium. If the medium
contains a lot of folders or non-MP3/WMA files, therefore,
it takes a long time until the unit starts playing MP3/WMA.
In addition, it may take time for the unit to move to the
next MP3/WMA file or a File Search or Folder Search may
not be performed smoothly.
Loading such a medium may produce loud noise to damage
the speakers.
• Do no attempt to play a medium containing a nonMP3/WMA file with the MP3/WMA extension.
The unit mistakes non-MP3/WMA files for MP3/WMA data
as long as they have the MP3/WMA extension.
• Do not attempt to play a medium containing non
MP3/WMA.
MP3/WMA playing order
When selected for play, Folder Search, File Search, or for
Folder Select, files and folders are accessed in the order in
which they were written by the CD writer.
Because of this, the order in which they are expected to be
played may not match the order in which they are actually
played. You may be able to set the order in which
MP3/WMA are to be played by writing them onto a
medium such as a CD-R with their file names beginning
with play sequence numbers such as "01" to "99",
depending on your CD writer.
Entering ID3 tag
The Displayable ID3 tag is ID3 version 1.x.
For the character code, refer to the List of Codes.
English 7
Opening/Closing the Monitor and Power Switch
Open the monitor
[OPEN/CLOSE] key
Close the monitor
Turn the power
switch on
Hold down the [SRC] key more than
one second to turn it off.
• Do not touch the moving components when you are opening or closing the monitor. If done, you will get hurt.
• Do not try to open or close the monitor by hand.
• You can automatically open or close the monitor when you turn on or off the ignition key (see page 58).
• If the monitor movement is stopped by the shift lever or another obstacle when the monitor is opened, this movement is
canceled by the safety function. If an obstacle is pinched by the monitor when closed, the monitor movement is also
canceled by the safety function. If it has occurred, remove the obstacle and press the [OPEN/CLOSE] key again.
8 English
[SRC] key
Removing/Attaching the Protection Panel
Remove the protection panel
Attach the protection panel
Place the right end of the protection panel onto
hooks and push it until clicked and locked.
Then, push the left end of the panel to lock it.
Two hooks
• Close the monitor first, then remove or attach the protection panel.
• After you have removed the protection panel, you cannot operate the receiver.
• After you have removed the protection panel, you can flash the burglar alarm lamp (see page 71).
English 9
XXV-05V Basic operation
■ When the monitor is open
EJECT
■ When the monitor is closed
ATT DISP
SCREENMODEV.SELFNC
SMVF
AUTO
DISPATT
AUTO
AV OUT
V.OF F
SRC
OFF
10 English
EJECT
ATT DISP
SRC
AUTO
DISPATT
AUTO
OFF
Disc indicator
Play Disc
1
[Disc insertion slot]
A disc is played when you insert it.
Stop to Play
2
[7] key
Stops to play.
Play/Pause
3
[38] key
Pauses and replays a disc.
Eject Disc
4
[0] key
The disc is ejected.
Switch Video Sources
5
[V.SEL] key
The video sources are switched each time you press
the key.
Clears the video image when pressed more than one
second. When pressed again, the original image is
redisplayed.
Switch Audio Source/Power Supply
6
[SRC] key
The audio sources are switched each time you press
the key.
Track/Station Selectors
8
[4] /[¢] key
Selects a music or chapter, track, or frequency.
Band/Folder Selectors
9
[FM]/[AM] key
Press the [FM] key to switch to the FM1/2/3 band or
the next folder/disc.
Press the [AM] key to switch to the AM band or the
previous folder/disc.
Attenuator
p
[ATT] key
Attenuates the volume.
Press it again to cancel muting.
Select Seek Mode
q
[AUTO] key
Selects the Seek mode. (see pages 24/28 for the
<Seek Mode>)
Screen Setup
w
[SCREEN] key
Displays the Screen Setup or Angle Setup screen. (see
page 58)
Function
e
[FNC] key
The video sources are switched each time you press
the key.
* Optional accessory
Hold down more than 1 second to turn the power
supply Off.
Push it again to turn power supply On.
Volume Controls
7
[5]/[∞] key
Switches the source that is output at the AV OUTPUT
terminal when it is pressed more than 1 second.
Switch Screen Mode
r
[MODE] key
The screen mode is switched. (see page 15)
Small Display
t
[DISP] key
Switches to the Small Display. (see page 14)
When a disc has already been loaded (when the "red"
disc indicator lights), do not insert another disc into its
slot. If done, the discs may be scratched or the system
may be damaged.
The display turns on when you put the parking brake,
except for the navigation system.
English 11
Basic Operations of Remote Controller
DVD
AUD
TV
BAND DISC
ATT
STOPSRC
DIRECT
OPEN
TOP MENU
AVOUT
RETURN
V.S E L
SUBTITLE
CLEARANGLE
MODE
MENU
PBC
AUDIO
ENTER
DVD
AUD
TV
BAND DISC
ATT
STOPSRC
DIRECT
AV OUT
RETURN
AUDI O
SUBTITLE
CLEARANGLE
Remote Control Mode selector
1
Selects one of the following remote control modes.
TV:TV source
DVD: Built-in DVD/VCD/CD/MP3/WMA player source
AUD: Tuner source or attached disc changer source
Volume Control
2
Adjusts the volume.
Press this control to mute. Press it again to cancel
muting.
[DISC]
3
Stops to play the built-in disc player.
12 English
Switches over the sound source each time it is
4
pressed.
Selects the Direct Search mode.
5
(see pages 21/25/30/39 for <Direct Search>)
Joystick
6
[DISC]
Right or left: Selects a chapter, a track or a song.
Up or down: Select a folder or a disc.
Push:Plays or pauses.
[TV]
Right or left: Select a channel.
Up:Switches to TV1, TV2, VIDEO1 or
VIDEO2.
Push:Selects the Seek mode.
(see page 24 for the <Seek Mode>)
[TUNER]
Right or left: Selects a station.
Up:Switches to the FM1, FM2, or FM3 band.
Down:Switches to the AM band.
Push:Selects the Seek mode.
[DVD]
7
Returns to the previous screen when the DVD Disc
Menu is used.
[DVD]
8
Calls the Top menu of DVD Disc Menu.
[Other than DVD] (1"TV", "AUD")
Opens or closes the monitor.
[DVD]
9
Calls the DVD Disc Menu.
[VCD]
Turns the PBC (Playback Control) function On or Off.
[Other than DVD/VCD] (1"TV", "AUD")
Switches the screen mode. (see page 15)
[DVD] [VCD]
p
Enters your selection from the DVD/VCD Disc Menu.
[Other than DVD/VCD] (1"TV", "AUD")
The video sources are switched each time you press
the key.
(see page 28 for the <Seek Mode>)
[DVD]
q
Selects an option from the DVD Disc Menu.
[TV] [TUNER]
w
1—6
[DVD]
1
2
3
4
5
6
`
Switches the Video source at the AV OUTPUT plug.
e
Clears a numeric value you have entered in the built-in
r
disc player during direct search.
Call the stations from memory.
:
Fast Backward (Rewind). The speed changes each
time it is pressed.
Fast Forward. The speed changes each time it is
pressed.
Switches the voice channel.
Slow Backward.
Slow Forward.
Switches the caption language.
Switches the view angle.
[DVD]: An operation during DVD playback
[VCD]: An operation during VCD playback
[DISC]: An operation during DVD, VCD, CD, MP3/WMA or MD playback
[Other than DVD]: An operation other than DVD playback
[Other than DVD/VCD] : An operation other than DVD or VCD playback
[TV]: An operation during TV source
[TUNER]: An operation during FM/AM broadcasting source
English 13
Switch Small Display
The Small Display screen mode changes each time the [DISP] key is pressed.
EJECT
[DISP] key
ATT DISP
DISPATT
SCREEN MODE V.SEL FNC
V.OFF
SMVF
AUTO
AUTO
AV OUT
SRC
OFF
* Hold down the [DISP] key more than 1 second to switch to the Frequency display.
14 English
Switch Screen Mode
The Screen mode of the monitor changes each time the [MODE] key is pressed.
SCREEN MODE V.SEL FNC
SMVF
ATT DISP
EJECT
DISPATT
AV OUT
V.OFF
SRC
OFF
AUTO
AUTO
Full picture mode [FULL]
Justify picture mode [JUST]
Cinema picture mode [CINEMA]
Zoom picture mode [ZOOM]
Normal picture mode [NORMAL]
• When the Menu, Easy Control screen, or Navigation is selected, it is shown in the full-size display mode automatically.
Their Screen mode cannot be changed.
• The Screen mode can be set for each of DVD/VCD, TV, and video images.
English 15
A
T
T
T
I
S
O
U
R
C
E
E
J
E
C
T
Control during DVD Video, DVD Audio or Video CD
Mode: FULL AVOUT: TV
12
Title T 0:10:25 Chap
DVD VIDEO
Mode: FULL
PBC VER2
AVOUT: TV
2
Scene P 0:10
DVD VCD
Control during DVD Video, DVD Audio or Video CD Playback
Various control screens appear when you play back a DVD Video (DVD-V), a DVD
Displaying the DVD/VCD
Playback screen
Title Number Display (DVD-V)
You can use the following operations when displaying
DVD/VCD images.
Plays back the
DVD or VCD.
DVD playback screen
1
5
6
7
2
3
1
Group Number Display (DVD-A)
Chapter Number Display (DVD-V)
2
Track Number Display (DVD-A)
Play Time Display
3
Forward Chapter Search Area (DVD-V)
4
Selects the next chapter.
Forward Track Search Area (DVD-A)
Selects the next track.
4
Backward Chapter Search Area (DVD-V)
5
Selects the previous chapter.
Backward Track Search Area (DVD-A)
Selects the previous track.
DVD Disc Menu Control Buttons Area
6
Information Display Button Area
7
VCD playback screen
10
Scene/Track Number Display (VCD)
8
11
3
8
Forward Scene/Track Search Area (VCD)
9
9
Selects the next scene (when PBC is On) or track
(when PBC is Off).
Backward Scene/Track Search Area (VCD)
p
Selects the previous scene (when PBC is On) or
12
track (when PBC is Off).
Zoom Control Button Area
q
Displays the Zoom Control buttons (see page 21).
Information Display Button Area
w
• For DVD/VCD playback, DVD-V/VCD picture
selection, or controller key operations, see <XXV05V Basic Operations> (see page 10).
• The information display is cleared automatically
after approximately 5 seconds. Also, the
information can be displayed automatically when
it is updated (see page 74).
16 English
SR C
12
Title T 0:10:25 Chap
DVD VIDEO
IN
Audio (DVD-A) or a Video CD (VCD) disc.
Displaying the Easy Control
Panel
The Control Panel is displayed in a floating position of the
DVD/VCD screen.
Display of Easy Control Panel
13
Adjusts the volume.
e
Switches the source.
r
Stops to play.
t
Rewinds or fast forwards.
y
Chapter Search (DVD-V)
u
Searches for a chapter.
Track Search (DVD-A)
Searches for a track.
Scene/Track Search (VCD)
Selects a scene (when PBC is On) or a track (when
PBC is Off).
Plays or pauses.
i
14
15
16
1617
17
13
18
The Easy Control Panel display is cleared when you
touch the center of image display area.
English 17
Control during DVD Video, DVD Audio or Video CD
PBC
SRC
T 0:05:203
Title
IN
Displaying the DVD-V/DVD-A/
VCD Control screen
Adjusts the volume.
Plays a DVD/VCD using various functions.
DVD/VCD Control screen
19
21
22
23
33
19
39
20
24
26
28
29
30
34
37
24
27
28
35
25
26
36
32
31
38
o
Ejects the disc from the built-in disc player.
;
Calls the Sound Effects Menu. (see page 86)
a
Switches the source.
s
Displays the Source Select screen when touched
more than one second. (see page 57)
19
Fast Forwards or Rewinds.
f
Stops to play.
g
Calls the Setup Menu. (see page 59)
d
When pressed twice, the disc is played from its
beginning when you play it in the next time.
Selects a chapter, a scene or a track.
h
When the DVD-V is paused, touch this button to
19
start single-frame stepping.
Plays or pauses.
j
Slow Forwards or Backwards. (DVD-V, DVD-A)
k
Turns the PBC function of VCD On or Off. (VCD Ver
l
2.0)
Switches the Repeat Play operations in the
/
following sequence.
DVD-V: Title Repeat, Chapter Repeat, Repeat Off
DVD-A: Group Repeat, Track Repeat, Repeat Off
VCD:Track Repeat, Repeat Off (Available when
the PBC is off)
Scrolls the display text.
z
Switches the play time display in the following
x
sequence.
DVD-V: Title, chapter, remaining titles
DVD-A: Group, track, remaining groups
VCD:Track, disc, remaining discs (Effective only
when the PBC function is off)
Title Number Display (DVD-V)
c
Group Number Display (DVD-A)
Chapter/Scene/Track Number Display
v
Play Time Display
b
Appears when a disc is inserted.
n
Function Indicator
m
Clock/Level meter Display
,
When touched, the display of Clock 1, Level meter
1, Clock 2, and Level meter 2 are switched one after
the other.
Volume Label Display
.
18 English
English 19
Control during DVD Video, DVD Audio or Video CD
1/1
AUDIO
1/1
SUB
1/1
ANGLE
ExitZOOM
MENU Ctrl
Page
+
Page
-
TopMenu
EnterCancel
RTNMENUTOP
Menu Control
Top
Off
Zoom
Cancel
Zoom Control
DVD Disc Menu
Selects an option from the DVD Disc Menu.
Displays the Disc Menu Control screen
1
DVD Disc Menu Control Buttons
Area (page 16)
1
5
5
6
Calls the Menu Control.
1
Switches the picture angle.
2
2
(during program playback only)
Switches the caption language.
3
(during program playback only)
Switches the voice language.
4
(during program playback only)
Switches the still images.
5
(during DVD-A playback only)
Displays the Zoom Control screen.
6
Clears the Disc Menu Control.
7
3
4
7
Select Disc Menu options
2
Disc Menu
MENU Ctrl
6
3
3
2
Calls the Menu. (during DVD-V playback only)
1
Returns to the Disc Menu Control screen.
2
Selects a menu option.
3
Enters your menu selection.
4
Returns to the previous menu screen.
5
Displays the Top Menu.
6
3
Zoom Control
ZOOM
2
1
5
3
4
1
20 English
2
3
Changes the zoom ratio at 4 levels (2 times, 3
1
2
2
times, 4 times, or off) each time you touch.
Scrolls the screen in the direction you touch.
2
Returns to the Disc Menu Control screen.
3
VCD Zoom Control
DIRECT
Top
Zoom Control
Off
Zoom
Exit
Direct Search
Displays an enlarged VCD screen.
Displays the Zoom Control screen
1
Zoom Control Button Area
(page 16)
2
2
2
Changes the zoom ratio at 4 levels (2 times, 3
1
times, 4 times, or off) each time you touch.
Scrolls the screen in the direction you touch.
2
Clears the Zoom Control button.
3
Information Display
You can search for a DVD/VCD chapter, scene
or track by entering its number.
Selects the Direct Search mode
1
1
2
3
The following items can be searched directly each
time it is pressed.
DVD-V: Title, Chapter, Time, Direct number
DVD-A: Group, Track, Direct number
VCD (when PBC is On): Scene, Direct number
VCD (when PBC is Off): Track, Time
However, the direct search may not be supported for
some discs.
Enter a number or time
2
—
When playing back a VCD, enter a PBC screen
number (if PBC is On) or a track number (if PBC is
Off).
Displays the DVD and AV information.
Information Display Button Area
(page 16)
The information is displayed for 5 seconds.
To clear your incorrect entry, press (CLEAR).
Search
3
The operation ends automatically if you do not
operate within 10 seconds.
English 21
TV Control
Mode: FULL
AUTO1
AVOUT: TV
1
TV 1GroupPreset 3 2 ch
TV
SR C
SEEKTVVIDEO
TV1 2 ch
TV
AUTO1
TV Control
Various control screens appear in the TV Source mode.
Displaying the TV Picture
screen
Various control screens appear in the TV Source mode.
Selects the
TV Pictures.
TV Picture screen
1
2
6
7
8
3
4
5
Displaying the Easy Control
Panel
The Control Panel is displayed in a floating position of the
TV picture.
Displaying the Easy Control Panel
TV Band Number Display
1
TV Area Group Display (South American sales
2
only)
Memory Number Display
3
Channel Number Display
4
Channel Up Area
5
Increase the channel.
Channel Down Area
6
Decrease the channel.
Band/Video Switch Area
7
Switches to TV1, TV2, VIDEO1 or VIDEO2.
Information Display Button Area
8
• For TV picture selection and receiver key
operations, see <XXV-05V Basic Operations>
(see page 10).
• The information display is cleared automatically
after approximately 5 seconds. Also, the
information can be displayed automatically when
it is updated (see page 74).
Adjusts the volume.
9
Switches the source.
p
Switches to Video (VIDEO1 or VIDEO2).
q
Switches the TV band (to TV1 or TV2).
w
Calls up a channel.
e
Switches the Seek mode.
r
(see page 24 for the <Seek Mode>)
9
The Easy Control Panel display is cleared when you
touch the center of image display area.
22 English
10
1213
11
14
13
9
Displaying the TV Control
SEEK
123456
SRC
Next
AUTO1
2 ch
screen
You can tune in a TV station using various functions.
TV Control screen
15
17
19
15
16
22
18
23
24
25
27
20
22
21
28
26
Displaying the TV Menu screen
You can select menu options using various functions.
Adjusts the volume.
t
Calls the TV Menu.
y
Calls the Sound Effects Menu. (see page 82)
u
Switches the source.
i
Displays the Source Select screen when touched
more than one second. (see page 57)
15
Switches to VIDEO1 or VIDEO2.
;
Switches to TV1 or TV2.
a
Select a channel.
s
Calls the Setup Menu. (see page 59)
o
Use the <Seek Mode> (see page 24) to change the
channel tuning sequence.
Switches between to buttons and
d
15
Function buttons to use.
Selects the Auto Memory mode.
f
1
6
(see page 24 for the <Auto Memory>)
Switches the Seek mode.
g
(see page 24 for the <Seek Mode>)
When to buttons appear, you can call
h
1
6
up the channels from memory.
For memory of broadcasting stations, see <Auto
Memory> (see page 24) or <Manual Memory> (see
page 24).
Seek Mode Indicator
j
Clock/Level meter Display
k
When touched, the display of Clock 1, Level meter
1, Clock 2, and Level meter 2 are switched one after
the other.
Selects options from various function menus.
l
Returns to the TV Control screen.
/
MENU
TV Menu screen
29
The available functions vary depending on the
model used (the tuner specifications and the
broadcasting system that can be received).
30
English 23
TV Control
Next
SEEK
Next
69chP6
1 Preset 6 12ch
ch
6
9
Seek Mode
Sets a TV station selection.
SEEK
If is not shown, touch .
The mode is switched each time you touch the
button.
AUTO 1
AUTO 2
MANUAL
Tunes in a station with good
reception automatically.
Tune in stations in memory one
after another.
Switches to the next channel
manually.
Next
Auto Memory
Stores stations with good reception in memory
automatically.
Select a band you wish to store in memory
1
Manual Memory
Stores the current receiving channel in
memory.
Select a channel you wish to store in memory
1
TV
Store in memory
2
1
1
If to are not shown, touch .
Continue to touch until the memory number appears.
6
6
—
Preset Select
Lists and tunes in stations in memory one after
the other.
Call the TV Menu
1
MENU
(P 23 y)
24 English
TV
Select the Auto Memory mode
2
AME
AME
If is not shown, touch .
Start Auto Memory
3
Touch or .
Auto Memory terminates when 6 stations are stored
or when all stations are tuned in.
The operation ends automatically if you do not
operate within 10 seconds.
Call the Preset Select Menu
2
Preset Select
4
2
3
2
Tunes in the displayed station.
1
If the station name is displayed if it has been set.
Switches the band of the displayed station list.
2
Band Display.
3
Returns to the TV Menu.
4
1
Set Station Name
TV
DIRECT
Direct Search
Names a station.
Select a station you wish to name
1
Call the TV Menu
2
MENU
Selects the Set Name mode
3
Name Set
Enter a name
4
For character entry details, see <Character Entry>
(see page 56).
Exit the Set Name mode
5
Tunes in a station when its channel number is
entered.
Selects the Direct Search mode
1
Enter a channel number
2
—
When you enter a channel number, signal reception
starts.
Example: When you receive Channel 06
Direct Search ends automatically if you do not
operate within 10 seconds.
OK
• You can store up to 20 stations in memory.
• You can set a station name only after you have
applied the parking brake.
English 25
Tuner Control
SR C
AMFMSEEK
FM 1 98.1 MHz
TUNER
AUTO1
Tuner Control
Various control screens appear in the Tuner Source mode.
Displaying the Easy Control
Panel
Adjusts the volume.
The Tuner Control Panel is displayed in a floating position
of the selected picture.
Displaying the Easy Control Panel
1
Switches the source.
2
Switches the band (to AM or FM1/2/3).
3
Tunes in a station
4
Switches the Seek mode.
5
(see page 28 for the <Seek Mode>)
1
2
33
4
4
5
1
• For receiver key operations, see <XXV-05V Basic
Operations> (see page 10).
• The Easy Control Panel display is cleared when
you touch the center of image display area.
26 English
Displaying the Tuner Control
CRSC
SEEK
123456
Next
SRC
98.1 MHz
Preset 3
AUTO1
screen
You can tune in a station using various functions.
Tuner Control screen
6
8
10
6
7
11
14
9
15
16
18
17
23
21
12
14
13
19
22
20
Displaying the Tuner Menu
screen
You can select menu options using various functions.
MENU
Tuner Menu screen
Adjusts the volume.
6
Calls the Tuner Menu.
7
Calls the Sound Effects Menu. (see page 86)
8
Switches the source.
9
Displays the Source Select screen when touched
more than one second. (see page 57)
Calls the Setup Menu. (see page 59)
p
6
Turns the Traffic Information function On or Off.
q
(see <Traffic Information>, page 30)
Switches to the FM1/2/3 band.
w
Switches to the AM band.
e
Tunes in a station.
r
Use the <Seek Mode> to change the frequency
switching.
6
Switches between to buttons and
t
1
6
Function buttons to use.
Turns the CRSC function On or Off. (Only when
y
receiving the FM broadcast)
Selects the Auto Memory mode.
u
(See page 28 for the <Auto Memory>)
Switches the Seek mode.
i
(see page 28 for the <Seek Mode>)
Selects the Program Service Name, Station Name,
o
or Radio Text mode for text display.
When to buttons appear, you can call
;
1
6
up the stations from memory.
For memory of broadcasting stations, see <Auto
Memory> (see page 28) or <Manual Memory> (see
page 28).
Seek Mode Indicator
a
Clock/Level meter Display
s
When touched, the display of Clock 1, Level meter
1, Clock 2, and Level meter 2 are switched one after
the other.
Memory Number Display
d
Selects options from various function menus.
f
Returns to the Tuner Control screen.
g
24
25
The available functions vary depending on the
model used (the tuner specifications and the
broadcasting system that can be received).
English 27
Next
SEEK
Tuner Control
Seek Mode
Sets a station selection.
SEEK
If is not shown, touch .
The mode is switched each time you touch the
button.
AUTO 1
AUTO 2
MANUAL
Tunes in a station with good
reception automatically.
Tune in stations in memory one
after another.
Switches to the next channel
manually.
Next
Auto Memory
Stores stations with good reception in memory
automatically.
Manual Memory
Stores the current receiving station in memory.
Select a station you wish to store in memory
1
FM
Store in memory
2
1
—
1
If to are not shown, touch .
Continue to touch until the memory number appears.
6
AM
6
Next
Select a band you wish to store in memory
1
FM
Select the Auto Memory mode
2
AME
AME
If is not shown, touch .
Start Auto Memory
3
Touch or .
Auto Memory terminates when 6 stations are stored
or when all stations are tuned in.
The operation ends automatically if you do not
operate within 10 seconds.
AM
28 English
Preset Select
P6 87.9 MHz
Preset 3
98.1 MHz
Set Station Name
Lists and tunes in stations in memory one after
the other.
Call the Tuner Menu
1
MENU
Call the Preset Select Menu
2
Preset Select
4
5
2
3
2
Tunes in the displayed station.
1
If the station name is displayed if it has been set.
Switches the band of the displayed station list.
2
Band Display.
3
Returns to the Tuner Menu.
4
Switches the Station List display between the
5
Program Service Name and SNPS (Frequency).
1
Names a station.
Tune in a station you wish to name
1
FM
Call the Tuner Menu
2
MENU
Selects the Set Name mode
3
Name Set
Enter a name
4
For character entry details, see <Character Entry>
(see page 56).
Exit the Set Name mode
5
OK
• You can store up to 30 stations in memory.
• You can set a station name only after you have
applied the parking brake.
AM
English 29
Tuner Control
DIRECT
SRC
Direct Search
Tunes in a station when its frequency is
entered.
Select a band
1
Selects the Direct Search mode
2
Enter a frequency
3
—
When you enter them, signal reception starts.
Example: When you receive FM 92.1 MHz
Example: When you receive AM 810 kHz
Traffic Information
When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
When the traffic bulletin starts...
The Traffic Information screen appears automatically.
Traffic Information screen
1
2
3
4
1
Control the volume.
1
Calls the Sound Effects Menu. (see page 86)
2
Switches the source.
3
Calls the Setup Menu. (see page 59)
4
Turns the Traffic Information function on or off.
5
5
1
1
The operation ends automatically if you do not
operate within 10 seconds.
Preset of traffic information volume
Tune in a station
1
Adjust the volume
2
Preset the volume
3
TI
Continue to touch the key until the volume is
displayed.
The preset volume is used automatically when the
traffic bulletin starts in the next time.
30 English
Loading...
+ 86 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.