Kenwood P-110 Owners manual

TURNTABLE

P-110

INSTRUCTION MANUAL

KENWOOD CORPORATION

1

P-110 (En)

B60-4038-08 (K/P/T/M/X)
99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6

OC

2

Introduction

Your choice of this product indicates that you are a devotee to ex­cellence in sound reproduction. We appreciate your patronage and
take pride in the long tradition of quality components that our com­pany represents. So that you can get the most out of your unit, we
suggest that you take the time to read through this manual before
you hook up and operate your system. This will acquaint you with
operating features and system-connection considerations so that
your listening pleasure will be enhanced right from the start. You
will notice that in all aspects of planning, engineering, styling, oper­ating convenience and adaptability we have sought to anticipate
your needs and desires.

Keep this manual handy for future reference.

Unpacking

Unpack the unit carefully and make sure that all accessories are put
aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit
is damaged or fails to operate, notify your dealer immediately. If
your unit was shipped to you directly, notify the shipping company
without delay. Only the consignee (the person or company receiv­ing the unit) can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing ma­terials for use should you transport or ship the unit in the future.

P-110 (En)

For the supplied accessories check them referring to the “Parts
nomenclature and assembly” on page 6.

Contents

Introduction .................................................................................. 2

Before applying power ................................................................ 3

Safety precautions ....................................................................... 3

IMPORTANT SAFEGUARDS ....................................................... 4

Parts nomenclature and assembly ............................................. 6

Connections.................................................................................. 6

Caution : Read the pages marked carefully to ensure safe operation.

Using the stylus cover................................................................. 7

Replacing the stylus .................................................................... 7

Operating instructions ................................................................. 7

In case of difficulty ...................................................................... 8

Specifications ............................................................................... 8

Before applying power

Units are designed for operation as follows.

U.S.A. and Canada ...................................................... AC 120 V only

Europe and U.K. .......................................................... AC 230 V only

Australia ....................................................................... AC 240 V only

*Other countrues ...................... AC 110-120/ 220-240 V switchable

Caution : Read this page carefully to ensure safe operation.

P-110 (En)

3

For the United Kingdom

Factory fitted molded mains plug

1. The mains plug contains a fuse. For replacement, use only a 5­Amp ASTA-approved (BS1362) fuse.

2. The fuse cover must be refitted when replacing the fuse in the
molded plug.

3. Do not cut off the mains plug from this equipment. If the plug
fitted is not suitable for the power points in your home or the
cable is too short to reach a power outlet, then obtain an ap­propriate safety approved extension lead or adapter, or con­sult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and

dispose of the plug immediately, to avoid a possible shock
hazard by inadvertent connection to the mains supply.

IMPORTANT:

The wires in the mains lead are coloured in accordance with
the following code:

Blue : Neutral
Brown : Live

Do not connect those leads to the earth terminal of a three-pin
plug.

For other countries

AC voltage selection

This unit operates on 110-120 or 220-240 volts AC . The AC volt­age selector switch under the motor pulley cover is set to the
voltage that prevails in the area to which the unit is shipped. Be­fore connecting the power cord to your AC outlet, make sure that
the setting position of this switch matches your line voltage. If
not, it must be set to your voltage in accordance with the following
direction.

Note:

Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector switch.

AC voltage selector switch

110-120V

220-240V

The following informations are on the rear.

1. Trade mark.

2. Model number.

3. The double square symbol.

4. Rated supply voltage.

5. Rated mains frequency.

6. Nature of supply.

Move switch lever to match your line
voltage with a small screwdriver or other
pointed tool.

SPEED

45
33

Safety precautions

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED
TO ALERT THE USER OF THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE
PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.

THE EXCLAMATION MARK WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER OF THE
PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERA­TURE ACCOMPANYING THE APPLIANCE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

CUT