Kenwood NEXEDGE NX-800, NEXEDGE NX-700 Specifications
NX-700/800
NEXEDGE® VHF/UHF Digital &FM Mobile Radios
GENERAL FEATURES
• 25 W (136-174 MHz) Models
•
25 W (400-470 MHz) Models
• Meets ETSI EN Standards
• 512 CH-GID / 128 Zones
• Dash & Remote Mount
• 14 Character Alphanumeric Aliases
• Backlit Dot Matrix LCD
• Function/Status LCD Icons
• Date & 12/24 Hour Time Clock
• Transmit/Busy/Call Alert/Warn LED
• On/Off Power Control
• 4 Up/Down Selectors
• 6 Front PF Keys
• Emergency/AUX Key
• 4W Speaker Audio
• Emergency Call Features
• Lone Worker
• Multi-Language Display
• DB-25 Accessory Connector
• 9 Programmable AUX I/Os
• 2 Programmable AUX Outputs
• KPG-111D Windows® FPU
• Flash Firmware Upgrading
• MIL-STD-810 C/D/E/F
• IP54/55 Water & Dust Intrusion
• PC Serial Interface
• SDM Manual Input*
• Transparent Data Mode*
• GPS Receiver Option
• VGS-1 Voice Guide / Voice & GPS
Data Storage Option
1
1
DIGITAL – GENERAL
• NXDN® Digital Air Interface
• AMBE+2™ VOCODER
• 6.25 & 12.5 kHz Channels
• Over-the-Air Alias
• Over-the-Air Programming*
2
• Paging Call
• Emergency Call
• All Group Call
• Status Messaging*
• Remote Stun/Kill*
• Remote Check*
1
1
1
• Short & Long Data Messages*1
• GPS Location with Voice*1
• NXDN® Scrambler Included
• AES / DES Encryption Options
DIGITAL CONVENTIONAL MODE
• 64 Radio Access Numbers (RAN)
• Individual & Group Selective Call
• Mixed FM/Digital Operation
• Conventional IP Networks
• Site Roaming
DIGITAL TRUNKING MODE
• Individual Private Call
• Group Call & Broadcast Call
• Telephone Interconnect*
• Transmission Trunked Mode*
• Message Trunked Mode*
• Call Queuing with Priority*
• Late Entry (UID & GID)*
• 4 Priority Monitor ID’s*
• Remote Group Add*
• Failsoft Mode
MULTI-SITE IP NETWORK COMPATIBLE
• 60,000 GIDs / UIDs
• Wide Area Group Call
• Auto Roaming Registration
• Group Registration
3
3
3
3
3
3
1
SCAN
• Single / Multi-Zone Scan / List Scan
• Dual Priority Scan (Conventional)
FM MODES – GENERAL
• 25, 20 & 12.5 kHz Channels
• FleetSync®/II
• DTMF Encode/Decode
• Voice Inversion Scrambler
• Analogue Scrambler Board Capability
FM CONVENTIONAL ZONES
• QT / DQT / Two-Tone
• 5-Tone Encode / Decode
• Call Keys 1-6
• Operator Selectable Tone
• Voting
FM LTR® TRUNKED ZONES
• Kenwood LTR® Features
FleetSync®/II (FM)
• PTT ID Digital ANI
• Selective Call & Group Call
• Status Messaging*
1
• Emergency Status
• Caller ID Display
• Short Text Messages*
1
MDC-1200
• PTT ID Digital ANI
• Caller ID Display
• Emergency Status
• Radio Check
• Radio Inhibit
*1
Requires NX subscriber unit PC Serial Interface compatible software application
(e.g Kenwood AVL & Dispatch Messaging software) or hardware (e.g. console).
*2
Requires Kenwood OTAP Management software
*3
These trunked features are primarily system programming and operational
dependent. Priority
Monitor also requires NX subscriber settings.
http://nexedge.kenwood.com
Options
■ KMC-30
Microphone
■ KMC-9C
Control Station
Desktop Microphone
■ KMC-32
Microphone
■ KES-5
External Speaker
with Keypad
■ KMC-35
Microphone
■ KMC-36
Microphone
with Keypad
■ KRK-10
Panel Remote Kit
■ KAP-2
Horn Alert
/ PA Relay Unit
Main Specifications
NX-700 NX-800
GENERAL
Frequency Range 136-174 MHz 400-470 MHz
Number of Channels 512
Zones 128
Max. Channels per Zone 250
Channel Spacing Analogue 12.5 / 20 / 25 kHz
Digital 6.25 / 12.5 kHz
Operating Voltage 13.2 V DC (10.8 - 15.6 V DC)
Operating Temperature Range
Frequency Stability ± 1.7 ppm ± 1.0 ppm
Antenna Impedance 50
Dimensions (W x H x D)
Weight (net) 1.38 kg
Applicable Standards ETSI R&TTE EN 300 086, EN 300 113, EN 300 219,
EN 301 489, EN 301 166
ETSI Safety EN 60065, EN 60950-1, EN 60215
Analogue measurements made per EN Standards or TIA/EIA 603 and specifications shown are typical.
Specifications are subject to change without notice, due to advancements in technology.
®
FleetSync
is a registered trademark of JVC KENWOOD Corporation.
®
LTR
is a registered trademark of Transcrypt International.
TM
is a trademark of Digital Voice Systems Inc.
AMBE+2
®
Windows
is a registered trademark of Microsoft Corporation.
®
NXDN
is a registered trademark of JVC KENWOOD Corporation and Icom Inc.
®
NEXEDGE
is a registered trademark of JVC KENWOOD Corporation.
- 30°C to + 60°C
Projections not included
Ω
160 x 45 x 157 mm
■ KCT-46
Ignition Sense Cable
■ VGS-1
Voice Guide
and Storage Unit
■ KCT-23M
DC Cable (3 m)
■ KDI-03
DIN-size
■ KCT-23M3
DC Cable (7 m)
■ KLF-2
Line Noise Filter
RECEIVER
Sensitivity (Analogue)
EN 20dB SINAD -3 dB µV
Sensitivity (Digital)
(12.5 kHz / 6.25 kHz)
Adjacent Channel Selectivity (Analogue)
(25kHz / 20kHz /12.5kHz) 80 dB / 78 dB / 70 dB 78 dB / 76 dB / 68 dB
Intermodulation (Analogue)
Spurious Response Rejection (Analogue)
Audio Distortion Less than 3%
Audio Output 4 W / 4 Ω
TRANSMITTER
RF Power Output 1 - 25 W
Modulation Limiting (Analogue) ± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission -36 dBm ≤ 1 GHz, -30 dBm > 1 GHz
FM Noise (EIA)
(Analogue, 25kHz / 20kHz /12.5kHz)
Modulation Distortion Less than 3%
Modulation 16K0F3E, 14K0F3E, 14K0F2D, 12K0F2D,
8K50F3E, 7K50F2D, 8K30F1E, 8K30F1D,
8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W,
4K00F2D
3% BER 0.28 µV / 0.20 µV
1% BER
KCT-23M3
Contact our authorized dealer for details and complete list of all accessories and options.
EIA 12dB SINAD 0.25 µV
70 dB
50 dB / 50 dB / 45 dB
Mounting Bracket
■ KMB-10
Key Lock Adaptor
All accessories and options may not be available in all markets.
NX-700 NX-800
(0.35 µV)
(0.40 µV)
-2 dB µV
80 dB
/ -5 dB µV
(0.28 µV)
Applicable MIL-STD & IP
MIL Standard MIL 810C MIL 810D MIL 810E MIL 810F MIL 810G
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 500.5/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II 501.5/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II 502.5/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II 503.5/Procedure I
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I 505.5/Procedure I
Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III 506.5/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 507.5/Procedure II
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 509.5
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III 510.5/Procedure I
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I 514.6/Procedure I
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV , V 516.5/Procedure I, IV, V 516.6/Procedure I, IV, V
International Protection Standard
Dust & Water Protection
IP54/55: Remote head with KRK-10
www.kenwood-electronics.co.uk
http://nexedge.kenwood.com
IP54: Radio itself
CL739E-E-2
Loading...