Kenwood Nexedge NX-210 Specification
NX-210
NEXEDGE®VHF Digital & Analog Portable Radio
GENERAL FEATURES
• 5 W (136-174 MHz) Model
• 512 CH-GID / 128 Zones
• 12-Key Keypad Model
• 14 Character Alphanumeric Aliases
• Backlit Dot Matrix LCD
• Function/Status LCD Icons
• Multi-Language Display
• Date & 12/24 Hour Time Clock
• Transmit/Busy/Call Alert/Warn LED
• On/Off Volume Knob
• 6 Front PF & Menu Keys
• 2 Side PF Keys
• Emergency/AUX Key
• 500 mW Speaker Audio
• KMC-47GPS Speaker Mic Option
• KPG-111D Windows®FPU
• Flash Firmware Upgrading
• MIL-STD-810 C/D/E/F/G
• MIL-STD “Driven-Rain”
• IP54/55 Water & Dust Intrusion
• PC Serial Interface
• SDM Manual Input
• Transparent Data Mode
• VGS-1 Voice Guide/Voice & GPS Data
Storage Option
1
1
DIGITAL – GENERAL
• NXDN®Digital Air Interface
• AMBE+2™VOCODER
• 6.25 & 12.5 kHz Channels
• Over-the-Air Alias
• Over-the-Air Programming*
• Paging Call
• Emergency Call
• All Group Call
• Status Messaging
• Remote Stun/Kill
• Remote Check
• Short & Long Data Messages
• GPS Location with Voice
• NXDN®Scrambler Included
• DES Encryption Module Option
• AES & DES Encryption Module Option
• AES/DES Software Key Loader Option
1
1
1
1
1
DIGITAL – CONVENTIONAL MODE
• 64 Radio Access Numbers (RAN)
• Individual & Group Selective Call
• Mixed FM/Digital Operation
• Conventional IP Networks
• Site Roaming
DIGITAL – TRUNKING MODE
• Individual Private Call
• Group Call & Broadcast Call
• Transmission Trunked Mode
• Message Trunked Mode
• Call Queuing with Priority
• Late Entry (UID & GID)
• 4 Priority Monitor ID’s
• Remote Group Add
• Failsoft Mode
1
2
2
2
2
2
MULTI-SITE IP NETWORKS
COMPATIBLE
• 60,000 GIDs / UIDs
• Wide Area Group Call
• Auto Roaming Registration
• Group Registration
SCAN
• Single Zone / Multi-Zone / List Scan
• Dual Priority Scan (Conventional)
http://nexedge.kenwood.com
Options
NB-31A
■ K
i-Cd Battery
N
1700mAh)
(
NB-32N
■ K
Ni-MH Battery
(2500mAh)
NB-33L
■ K
Li-ion Battery
(2000mAh)
NB-43L
■ K
i-Polymer Battery
L
3300mAh)
(
NB-49PL
■ K
rimary Lithium Battery
P
4500mAh)
(
BP-6
■ K
lkaline Battery Case
A
SC-32
■ K
Rapid Rate Charger
for Ni-Cd/Ni-MH/Li-ion
KNB-33L
KBP-6
SC-326
■ K
apid Rate Six Unit Charger
R
or Ni-Cd/Ni-MH/Li-ion
f
VC-15
■ K
Rapid Rate Vehicular
Charger Adapter for KSC-32
VC-18
■ K
D.C. Vehicular Charger
RA-22
■ K
HF Helical Antenna
V
RA-26
■ K
HF Whip Antenna
V
RA-16
■ K
VHF Stubby Antenna
RA-25
■ K
VHF High Gain Antenna
MC-41M
■ K
IL-STD & IP 54/55
M
peaker Microphone
S
MC-47GPS
■ K
GPS Speaker Microphone
EP-1
■ K
Heavy Duty Earphone
HS-11BL
■ K
-Wire Mini Lapel
2
ic. with Earphone
M
HS-12BL
■ K
-Wire Mini Lapel
3
Mic. with Earphone
HS-14
■ K
Lightweight Single
Muff Headset
HS-15-BH
■ K
ver-the-Head
O
eavy Duty Headset
H
HS-15-OH
■ K
Behind-the Head
Heavy Duty Headset
GS-1
■ V
oice Guide
V
Storage Unit
&
BH-11
■ K
elt Clip (2.5")
B
LH-154K2
■ K
Heavy Duty Leather
Carrying Case
ontact an authorized Kenwood dealer for details and complete list of all accessories and options.
C
All accessories and options may not be available in all markets.
Main Specifications
GENERAL
NX-210
requency Range 136-174 MHz
F
Number of Channels 512
Zones 128
ax. Channels per Zone 250
M
Channel Spacing Analog/Digital 12.5 / 15 / 25 / 30 kHz (6.25 / 12.5 kHz)
Operating Voltage 7.5V DC ± 20%
attery Life (5-5-90) with KNB-31A More than 10 hours
B
Battery Life (10-10-80) with KNB-31A More than 6 hours
perating Temperature Range
O
Frequency Stability ± 2.0 ppm
Antenna Impedance 50
Dimensions (W x H x D)
Projections not included
Weight (net) Radio only 9.52 oz (270 g)
FCC ID ALH423500
IC Certification 282D-423500
with KNB-32N More than 14 hours
with KNB-33L More than 11 hours
ith KNB-32N More than 9 hours
w
ith KNB-33L More than 7 hours
w
-22˚ F to +140˚ F (
30˚ C to +60˚ C
-
Radio only
with KNB-31A
with KNB-32N
with KNB-33L
with KNB-31A 18.52 oz (525 g)
with KNB-32N 19.58 oz (555 g)
with KNB-33L 13.93 oz (395 g)
2.28 x 5.46 x 0.88 in (58 x 138.8 x 22.4 mm)
2.28 x 5.46 x 1.60 in (58 x 138.8 x 40.7 mm)
2.28 x 5.46 x 1.60 in (58 x 138.8 x 40.7 mm)
2.28 x 5.46 x 1.35 in (58 x 138.8 x 34.2 mm)
)
RECEIVER
Sensitivity Digital @ 6.25kHz (3% BER) 0.20 µV
Selectivity Analog @ 25 kHz 72 dB
Intermodulation Distortion
Spurious Response Analog 70 dB
udio Distortion Less than 3%
A
Audio Output 500 mW / 8
TRANSMITTER
RF Power Output 5 W / 1 W
Spurious Response 70 dB
M Hum & Noise Analog @ 25 kHz 45 dB
F
Audio Distortion Less than 3%
Modulation 16K0F3E, 11K0F3E, 8K30F1E,
Analog meas urements made per TIA/E IA 603 and specifi cations shown are typical.
Specification s are subject to change without noti ce, due to a dvancements in technol ogy.
FleetSync®is a registered trademark of JVC KENWOOD Corporation.
®
LTR
is a registered trademark of Transcrypt International.
M
T
AMBE+2
is a trademark of Digital Voice Systems Inc.
®
Windows
is a registered trademark of Microsoft Corporation.
®
is a registered trademark of JVC KENWOOD Corporation and Icom Inc.
NXDN
®
NEXEDGE
is a registered trademark of JVC KENWOOD Corporation.
igital @ 12.5kHz (3% BER) 0.25 µV
D
Analog (12 dB SINAD) 0.25 µV
nalog @ 12.5 kHz 65 dB
A
Analog 70 dB (±50,100 kHz)
nalog @ 12.5 kHz 40 dB
A
NX-210
8K30F1D, 8K30F7W, 4K00F1E,
4K00F1D, 4K00F7W, 4K00F2D
Footnotes from front:
1
Requires compatible PC software
application or console.
2
These trunked features are primarily
system programming and operational
dependent. Priority Monitor also
requires NX subscriber settings.
Applicable MIL-STD & IP
MIL Standard MIL 810C MIL 810D MIL 810E MIL 810F MIL 810G
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 500.5/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II 501.5/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II 502.5/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II 503.5/Procedure I
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I 505.5/Procedure I
Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III 506.5/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 507.5/Procedure II
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 509.5
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III 510.5/Procedure I
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I 514.6/Procedure I
Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV 516.6/Procedure I, IV
International Protection Standard
Dust & Water Protection IP54/55
*To meet MIL810 and IP grade, the 2-pin connector has to be connected.
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
ADS#56211 Printed in USA
Loading...