Kenwood TK-7180H, TK-8180K, TK-8180H, TK-8180HK, MPT1327 User Manual
TK-7180(H)/8180(H)
MPT
VHF/UHF MPT1327 Trunked Mobile Radios
GENERAL FEATURES
• 30W / 50W (136-174 MHz)
• 30W / 45W (450-520*, 400-470 MHz)
• Remote Control Head Option
• Backlit Dot Matrix LCD
• 12 Character Alphanumeric Aliases
• 3-Digit Sub-Display
• Function / Status LCD Icons
• Display Customization
• RSSI Indicator
• Date & 12/24 Hour Time Clock
• Transmit / Busy / Call Alert / Warn LED
• 6 Backlit PF Keys
• Emergency / AUX Key
• 4 Watt Front Panel Speaker
• Voice Inversion Scrambler Built-in
• Enhanced Kenwood Audio
• Encryption Board Control
Easy Option Port
•
1
• VGS-1 Voice Storage Option1
• DTMF Manual Encode
• Timed Power Off
• DB-25 Accessory Connenctor
• 9 Programmable AUX I/Os
• 2 Programmable AUX Outputs
• Ignition Sense
3
• Mil-Spec Standard Mic
• MIL-Spec 12-Key DTMF Mic Option
1
2
• Windows®Programming & Tuning
• Windows®Firmware Uploading
4
• Front Panel Test / Tune
• MIL-STD-810 C/D/E/F
• MIL-STD “Driven-Rain”
• IP-54/55 Water & Dust Intrusion
CONVENTIONAL ZONES
5
5
6
• 32 Channels
• 12.5/25 kHz CH Spacing (per CH)
• QT / DQT Encode & Decode
• Normal Scan (No Priority)
• Scan Delete / Add
• Companded Audio (per CH)
• Time Out Timer
• Busy Channel Lockout (per CH)
TRUNKED ZONES
6
• 8 Network Capacity
• Multi-Site Network Trunking
• Single-Site Trunking
• Network Roaming/Registration
• 12.5/25 kHz Spacing (per network)
4
• Individual Call ("Private Calling")
• Group Call
• Broadcast Call
• Inter-fleet Calling
• Inter-Prefix Calling
• PTT Intiate Call
• PSTN/PABX Call
• Priority Call
• Emergency Call
• Pre-emptive Emergency
• Emergency Calling Features
• Emergency Man-Down Option
• Full Off Air Call Setup
• Network Call Queuing
• Call Prioritization
• Third-Party Diversion
• Queue Incoming Call
• Special Alert Tones
Electronic Serial Number (ESN)
•
7
• Manual Conventional Mode
• 250 Call and Group Address List
• Group Scan
• Home Address
• Direct Address
• Companded Audio
8
• Network Selector
• KAP-2 PA/Horn Alert Option
9
JQA-QMA1205
Options
■ KMC-35
Microphone
(supplied microphone)
■ KMC-36
Keypad Microphone
■ KCT-46
Ignition Sense Cable
■ KCT-40
Radio Interface Cable
■ VGS-1
Voice Guide &
Storage Unit
■ KES-3
External Speaker
(for KDS-100, KGP-2A/2B)
■ KMC-32
Keypad Microphone
■ KCT-23M
DC Cable (Dash
mount / 10 feet)
■ KMC-9C
Control Station
Desktop Microphone
■ KRK-10
Control Head
Remote Kit (23ft/7m)
■ KCT-23M3
DC Cable (Remote
mount / 23 feet)
■ KAP-2
Horn Alert/Public
Address Relay Unit
Specifications
Model TK-7180 TK-7180H TK-8180 TK-8180H
GENERAL
Frequency Range
Type 1 136~174 MHz 450~520 MHz
Type 2
Number of Channels*
Conv. Mode Max.32 per Radio
Trunked Network 1023
Channel Spacing
Wide 25 kHz, 30 kHz 25 kHz
Narrow 12.5 kHz, 15 kHz 12.5 kHz
Operating Voltage 13.6 V DC±15 %
Current Drain
Standby 0.4 A 0.4 A 0.4 A 0.4 A
Receive 1.0 A 1.0 A 1.0 A 1.0 A
Transmit 9.0 A 13.0 A 9.0 A 13.0 A
Duty Cycle Transmit: 20 %
Operating Temperature Range -22 ºF ~ +140 ºF (-30 ºC ~ +60 ºC)
Frequency Stability ±0.00025 % (-22 ºF ~ +140 ºF)
Antenna Impedance 50 Ω
Channel Frequency Spread
Type 1 38 MHz 70 MHz
Type 2
Dimensions (W x H x D), 6-5/16” x 1-3/4” x 6-3/16”
Projections not included (160 mm x 45 mm x 157 mm)
Weight (net) 3.3 lbs. (1.5 kg)
FCC ID
Type 1 K4437303110 K4437303210 K4437313110 K4437313210
Type 2
–––
IC Certification
Type 1 282F-37303110
Type 2
– – –
*Maximum capability depends on the number of programmed Zone and repeater channels.
–
–
–––
400~470 MHz
70 MHz
K4437313120 K4437313220
282F-37313120
–
■ KES-5
External Speaker
(requires KAP-2)
■ KMB-10
Key Lock Adapter
■ KLF-2
Line Noise Filter
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Model TK-7180 TK-7180H TK-8180 TK-8180H
RECEIVER (Measurements made per EIA/TIA-603)
Sensitivity (12dB SINAD)
Wide 0.25 µV
Narrow 0.28 µV
Selectivity**
Wide 80 dB 80 dB
Narrow 70 dB 67 dB
Intermodulation Distortion
Wide/Narrow 75 dB (±50, 100 kHz)
Spurious Response** 90 dB 85 dB
Audio Output
(4 Ω Impedance) 4 W with less than 5 % distortion
TRANSMITTER (Measurements made per EIA/TIA-603)
RF Output Power
Type 1 30 to 1 W 50 to 10 W 30 to 1 W 45 to 10 W
Type 2
Spurious Response 70 dB
Type of Emission
Wide 16K0F3E
Narrow 11K0F3E
FM Hum & Noise
Wide 50 dB
Narrow 45 dB
Microphone Impedance 600 Ω
Audio Distortion
Wide/Narrow 3 %
** Typical specifications
Kenwood follows a policy of continuous
advancement in development. For this reason
specifications may be changed without
notice.
Applicable MIL-STD & IP
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Low Pressure
High Temperature
Low Temperature
Temperature Shock
Solar Radiation
Rain
Humidity
Salt Fog
Dust
Vibration
Shock
International Protection Standard
Dust & Water Protection P54: Radio itself
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III
507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I
516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V
P54/55: Remote Head with KRK-10
*To meet above Mil810 and IP grade, weather proof microphone KMC-35 or KMC-36 has to be connected.
■ KPS-10A
DC Power Supply
■ KPS-15
DC Power Supply
––
footnotes from Front:
1
Easy Option Port: Supports Encryption boards or VGS-1 only;
ANI boards are not supported. VGS-1: Auto-Reply only operates
in MPT trunked mode. Auto-Record, Voice Memo operates in
Conventional & MPT Trunked modes.
2
DTMF Manual Encode (DTMF microphone required)
3
KCT-46 ignition sense cable option required; plugs into mobile
ignition sense pig-tail cable.
4
KPG-96D required: Windows®98/ NT/ 2000/ Me/XP compatible.
5
MIL-STD “Driven-Rain” and IP-55 Water/Dust Intrusion apply
to remote control head only; IP54 applies to radio chassis.
6
Conventional Mode: Mode entry by PF key or auto Mode Change.
Network/Trunking operations are MPT1327/1342 compataible.
7
Special Alert Tone Patterns: enabled for MPT Individual Call, Auto
Mode Change.
8
Companded Audio can be enabled for “all Channels: in Trunked
Mode and per Channel in Conventional Mode.
9
KAP-2 required: Public Address & Horn Alert operate in
MPT mode only.
* TK-8180K/HK models are derated to 25W/ 40W power from
490-512 MHz
(490 -520 MHz:25 to 1 W) (490 -520 MHz:40 to 10 W)
30 to 1 W 45 to 10 W
ADS#38905 Printed in USA
Loading...