Kenwood FP580 series, FP691 Instruction Manual
2
1
0
P
instructions
FP580 series
2
1
0
P
2
1
0
P
2
1
0
P
6
5
4
3
2
1
bl
bm
bn
bo
7
bk
4
5
3
2
2
3
1
8
9
safety
l
Read these instructions carefully and retain for future reference.
l
Remove all packaging and any labels.
l
The blades and discs are very sharp, handle with care. Always
hold the knife blade by the finger grip at the top,
away from the cutting edge, both when handling and
cleaning.
l
Always remove the knife blade before pouring contents from the bowl.
l
Keep hands and utensils out of the processor bowl and liquidiser jug whilst
connected to the power supply.
l
Switch off and unplug:
l
before fitting or removing parts
l
after use
l
before cleaning
l
Never use your fingers to push food down the feed tube. Always use the
pusher/s supplied.
l
Never fit the blade unit to the power unit without the liquidiser
goblet or mill jar fitted.
l
Before removing the lid from the bowl or liquidiser/mill from the power unit:-
l
switch off;
l
wait until the attachment/blades have completely stopped;
l
Be careful not to unscrew the liquidiser jug or mill from the blade unit.
l
SCALD RISK: Hot ingredients should be allowed to cool to room temperature
before blending.
l
Do not use the lid to operate the processor, always use the on/off speed control.
l
This machine will be damaged and may cause injury if the
interlock mechanism is subjected to excessive force.
l
Never use an unauthorised attachment.
l
Never leave the machine on unattended.
l
Never use a damaged machine. Get it checked or repaired: see ‘service’.
l
Never let the power unit, cord or plug get wet.
l
Don’t let excess cord hang over the edge of a table or worktop or touch hot
surfaces.
l
Do not exceed the maximum capacities stated.
l
Children should be supervised to ensure that they do not play with the
appliance.
l
This appliance shall not be used by children. Keep the appliance and its cord
out of reach of children.
2
l
Appliances can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and if
they understand the hazards involved.
l
Only use the appliance for its intended domestic use. Kenwood will not accept
any liability if the appliance is subject to improper use, or failure to comply with
these instructions.
l
Misuse of your processor/liquidiser can result in injury.
liquidiser safety
l
SCALD RISK: Hot ingredients should be allowed to cool to room temperature
before blending.
l
To ensure the long life of your liquidiser, never run it for longer than 60 seconds.
Switch off as soon as you’ve got the right consistency.
l
Don’t process spices - they may damage the plastic.
l
The machine won’t work if the liquidiser is fitted incorrectly.
l
Don’t put dry ingredients into the liquidiser before switching on. If necessary,
cut them into pieces; remove the filler cap; then with the machine running, drop
them through one by one.
l
Don’t use the liquidiser as a storage container. Keep it empty before and after
use.
l
Never blend more than 11⁄2 litres (2pts 12floz) - less for frothy liquids like
milkshakes.
slicing/shredding discs safety
l
Never remove the lid until the cutting disc has completely stopped.
l
Handle the cutting discs with care - they are extremely sharp.
mill safety
l
Never fit the blade unit to your machine without the jar fitted.
l
Never unscrew the jar while the multi-mill is fitted to your machine.
l
Don’t touch the sharp blades. Keep the blade unit awayfrom children.
l
Never remove the multi-mill until the blades have completely stopped.
3
Loading...