Kenwood CAW2323-03-1 User Manual

Installation Manual CAW 2323-03-1 / CAW 2323-03-2

Installation Manual Double DIN Kit

10 mm

space

7. Place the metal frame into the dashboard.

Adjust it vertically with 10 mm of space to the top and bottom.

10 mm

8. Use a soldering iron to heat up the plastic surface under the

metal hooks left and right (4 on

each side) and press them into the heated plastic. (see arrows)

9. Push the Kenwood Navigation into the ﬁxed metal frame until it snaps in.

CAW 2323-03-1 (anthracite) CAW 2323-03-2 (black)

• Porsche 911 (Type 997) 4 2008

• Porsche Boxster (Type 987)

• Porsche Cayman (Type 987)

Compatible with these Kenwood double DIN devices

Kenwood Navigation

4 2008 4 2008

Place the facia plate.

Reinstall everything in reverse

order to ﬁnish installation.

Double DIN Kit contents

• (2) Installation Kit

• (1) Metal Frame

All installation work must be performed by a qualiﬁed professional installer only. The manufacturer / dealer is not liable for any kind of incidential or indirect damages.

• (3) Facia Plate

Installation Manual CAW 2323-03-1 / CAW 2323-03-2

4. Loose one screw (head 7 mm), located at the right side of the head unit.

1. Remove 2 Torx (TX25) screws (1 on each side) left and right,

located at the front end of the

centre tunnel.

Note:

The screws are hidden

in the carpet. (see photo)

2. Remove 4 Torx (TX15) screws (2 on each side)

Note: Just loose the screw. Don‘t remove! There is no screw at the left side.

5. Release the 4 retaining brackets of the OEM head unit (2 at each side) by turning them for 90° (see arrows)

6. Remove the OEM head unit.

3. Remove the side panels (ﬁxed with clips) by pulling them towards your direction.

Mount the metal brackets with the double DIN head unit

(sample)(sample)

The position of the copper coloured holder can be adjusted to your needs for perfect ﬁt. (see sample)