Installation Manual
Double DIN Kit
Part-No:. CAW 2323-02
Porsche 911 (type 996) 1997-2006 (with PCM)
For models without cupholder only
Compatible with these Kenwood double DIN devices
Kenwood Navigation
1
© 12/2008 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
3
2
Double DIN Set contents
• (1) Metal Frame
• (2) Installation Kit • (3) Facia Plate
Models with PCM system
1. Insert Porsche radio release keys in
the holes of the PCM head unit.
Remove OEM head unit by pulling
it towards your direction.
(sample)(sample)
Mount the metal brackets with
the double DIN head unit
The position of the copper
coloured holder can be adjusted
to your needs for perfect fit.
(see sample)
2. Place the facia plate
on the dashboard.
Push the metal frame into the
facia plate.
Connect all required circuit points
and push the double DIN head
unit until it snaps in.
Place the trim frame.
Reinstall everything in reverse
order.
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.