Kenwood CAW2323-01 User Manual

• Porsche Cayenne
Compatible with these Kenwood double DIN devices
Kenwood Navigation
Installation Manual Double DIN Kit
Part-No.: CAW 2323-01
2
© 12/2008 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
1
• (1) Metal Frame
• (2) Facia Plate
4
3
Installation Kit (3) Trim Frame (4)
LOCATION & REMOVAL
With the head unit now removed locate the power ISO plug and the Black optical plug shown below.
Insert OPTICAL leads into TOOKI-POR loom and car loom to create loop, see diagram below
INSTALLATION
Installation is made at the front unit.
To remove the head unit you will need to remove the surrounding trim then the 4 screws securing the unit, as below. Some models are removed with specific radio keys.
IN cable from interface
1. Press TEL on PCM Radio.
2. Tooki Searching indicates no phone connected.
3. Start the pairing procedure on your mobile phone.
Make sure the Bluetooth feature is turned on.
Consult your phone’s manual for phone-specific
pairing procedures.
4. Once your mobile phone discovers Tooki xxxx
(last 4 digits will vary), select and pair Tooki.
5. When prompted for a passkey, enter 6888 on your
mobile phone.
6. Once pairing is complete, go to the head unit and
select “dialled calls” Choose the phone you wish to
pair, choose select,. Go down to “dial” and press
bottom right rotary control. After a short while you
OPERATING INSTRUCTIONS
Installation Manual Double DIN Kit CAW 2323-01
1. Porsche Cayenne with OEM head unit.
Mount the metal brackets with the double DIN head unit
2. Remove trim frame, surrounding the OEM head unit.
Remove the 4 screws.
Remove the OEM head unit.
The position of the copper coloured holder can be adjusted to your needs for perfect fit. (see sample)
3. Place facia plate on the dash­board. Fix it with the 4 original screws.
Push the Metal Frame into the
facia plate
Connect all required circuit points
and push the double DIN head unit in the metal frame until it snaps in.
All installation work must be performed by a qualified professional installer only. The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
Place the trim frame.
Reinstall everything in reverse
order to finish installation.
Loading...