Kenwood CAW2320-19 User Manual

Installation Manual Double DIN Kit CAW 2320-19 / CAW 2320-19-RT

Installation Manual Double DIN Kit

Standard: CAW 2320-19 Rubber-Touch: CAW 2320-19-RT

• Audi TT (8J) 2006

Compatible with these Kenwood double DIN devices

Kenwood Navigation

Double DIN Set contents

• (1) Metal Frame

• (2) Installation Kit

• (3) Facia Plate

• (4) Trim Frame

Installation Manual Double DIN Kit CAW 2320-19 / CAW 2320-19-RT

1. Put four radio release keys in the appropiate slots of the OEM radio

2. Remove the OEM head unit by pulling it towards your direction.

3. Place the mounting frame on the dashboard.

Mount the metal brackets with the double DIN head unit

(sample photo)(sample photo)

The position of the copper coloured holder can be adjusted to your needs for perfect ﬁt. (see sample)

4. Fix the mounting frame with two screws (see arrows)

Push the Metal Frame into the mounting frame

All installation work must be performed by a qualiﬁed professional installer only. The manufacturer / dealer is not liable for any kind of incidential or indirect damages.

5. Push the Metal Frame into the facia plate, place both into the dashboard.

Connect all required circuit

points and push the double DIN head unit in the metal frame until it snaps in. Fix the facia plate with the original screws, place the trim frame.

Reinstall everything in reverse

order to ﬁnish installation.