![](/html/cd/cdc6/cdc63b99405aaf0540e1fdafe48c63ed280d7e768688124c634de4a61d21862b/bg1.png)
Installation Manual Double DIN Kit CAW 2320-15 / CAW 2320-15-RT
Installation Manual
Double DIN Kit
Standard: CAW 2320-15
Rubber-Touch: CAW 2320-15-RT
• Audi A4 (B6/B7)
• Seat Exeo
Compatible with these Kenwood double DIN devices
Kenwood Navigation
© 5/2009 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
1
2
Double DIN Set contents
• (1) Metal Frame
• (2) Installation Kit
3
4
• (3) Mounting Frame
• (4) Facia Plate
![](/html/cd/cdc6/cdc63b99405aaf0540e1fdafe48c63ed280d7e768688124c634de4a61d21862b/bg2.png)
Installation Manual Double DIN Kit 381320-15 / 391320-15
1. Put four radio release keys in the
appropiate slots of the OEM radio
2. Remove the OEM head unit by
pulling it towards your direction.
3. Place the mounting frame on the
dashboard.
Seat Exeo only:
The mounting frame
has to be clipped
behind the fixed OEM
frame (see photo)
4. Fix the mounting frame with
two screws (see arrows)
Push the Metal Frame into the
mounting frame
Mount the metal brackets with
the double DIN head unit
The position of the copper coloured holder can be adjusted to
your needs for perfect fit.
(see sample)
5. Connect all required circuit
points and push the double
DIN head unit in the metal
frame until it snaps in.
Place the facia plate to finish
installation.
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.