Kenwood CAW2275-03 User Manual

Installation Manual Double CAW 2275-03 / CAW 2275-03-RT

7. Place the metal bracket including the headunit.

Connect all required wires.

Place the dashboard panel, place the radio trim.

Installation Manual Double DIN Kit

Standard: CAW 2275-03 Rubber-Touch: CAW 2275-03-RT

• SsangYong Actyon 2006->

Compatible with these Kenwood double DIN devices

Kenwood Navigation

Double DIN Set contents

• (1) Trimm Plate

• (2) Metal Band • (3) Plastic Spacers

Installation Manual Double DIN Kit CAW 2275-03 / CAW 2275-03-RT

1. Remove the panel under the climate control panel.

2. Remove the original bracket, which is tighten by four screws at the location of the arrows.

3. Remove the original plastic

bracket from the metal bracket, which is tighten by four screws.

The inner plastic panel must be

removed carefully.

(see white line)

4. Place the 4 plastic spacers in the metal bracket (see arrows).

They must be placed 2 cm measured from the edges.

5. Mount the metal band beneath the original bracket.

6. Tighten the headunit onto the metal band. Various positions are possible.

Choose the positions which gives the best result.

All installation work must be performed by a qualiﬁed professional installer only. The manufacturer / dealer is not liable for any kind of incidential or indirect damages.