Kenwood CAW2275-01-RT User Manual

Installation Manual Double DIN Kit CAW 2275-01 / CAW 2275-01-RT

7. Place the metal bracket including
the headunit. Connect all re­quired wires.

Installation Manual
Double DIN Kit

Standard: CAW 2275-01
Rubber-Touch: CAW 2275-01-RT

Place the dashboard panel, place
the radio trim.

• SsangYong Kyron

Compatible with these Kenwood double DIN devices

Kenwood Navigation

1

2

3

© 2009 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.

Double DIN Set contents

• (1) Trimm Plate

• (2) Metal Band • (3) Plastic Spacers

Installation Manual Double DIN Kit 381275-01 / 391275-01

1. Remove the panel under the
climate control panel.

2. Remove the original bracket, which
is tighten by four screws at the loca­tion of the arrows.

3. Remove the original plastic bra­cket from the metal bracket. This
is tighten by four screws.

The inner plastic panel must be

removed carefully.

(see white line)

4. Place the 4 plastic spacers
in the metal bracket (see arrows).

They must be placed 2 cm
measured from the edges.

5. Mount the metal band beneath
the original bracket.

6. Tighten the headunit onto the
metal band. Various positions are
possible.

Choose the positions which gives
the best result.

All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.