Kenwood CAW2190-27-RT User Manual

Installation Manual Double DIN Kit

Standard: CAW 2190-27 Rubber-Touch: CAW 2190-27-RT

• Mercedes Sprinter (W906) 2006-> (with aircondition)

• VW Crafter 2006-> (with aircondition)

Compatible with these Kenwood double DIN devices

Kenwood Navigation

Double DIN Kit contents

• (1) Metal Frame

• (2) Installation Kit

All installation work must be performed by a qualiﬁed professional installer only. The manufacturer / dealer is not liable for any kind of incidential or indirect damages.

• (3) Facia Plate

• (4) Trim Frame

Installation Manual Double DIN Kit CAW 2190-27

1. Remove OEM front panel (see arrows)

2. Remove the OEM radio and the aircon control unit.

They are ﬁxed with 8 screws (see arrows)

aircon control unit

Preparation of the Kenwood Navigation

3. Dashboard with removed OEM radio and aircon control unit.

4. Place the new Double-DIN facia plate on the dashboard

Fix it with the 8 original screws (see step 2)

5. Push the Metal Frame into the facia plate

Mount the metal brackets with the double DIN head unit

The position of the copper coloured holder can be adjusted to your needs for perfect ﬁt. (see sample)

Connect all required circuit points

and push the double DIN head unit in the metal frame until it snaps in.

Place the trim frame

Place the OEM front panel

All installation work must be performed by a qualiﬁed professional installer only. The manufacturer / dealer is not liable for any kind of incidential or indirect damages.