Kenwood CAW2190-25-RT User Manual
Installation Manual Double DIN Kit CAW 2190-25-RT
6. Place the facia plate on the dashboard.
Place the metal frame into the
facia plate.
7. Connect all required circuit points
to the Kenwood head unit and
and push it into the metal frame
until it snaps in. Place the trim
frame.
Reinstall everything in reverse
order to finish installation.
Installation Manual
Double DIN Kit CAW 2190-25-RT
• Mercedes SL-Class (R230) 2004
Compatible with these Kenwood double DIN devices
Kenwood Navigation
1
3
4
© 12/2008 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
2
Double DIN Set contents
• (1) Metal Frame
• (2) Installation Kit
• (3) Facia Plate
• (4) Trim Frame
Installation Manual Double DIN Kit 2190-25-RT
1. Remove the side panels at each
side by pulling them towards
your direction.
4. Open both cup holders.
Remove the 2 Torx TX20 screws
(which become visible after
removing the centre console)
Remove the cup holders.
2. Remove the 6 Torx (TX20) screws.
(3 screws (a) (b) (c) on each side)
c
a
b
c
Plastic Clips
5. Press the 2 plastic clips (see arrows)
located under the OEM-Radio.
Remove the OEM-Radio.
a
b
3. Remove the middle part of the
centre console.
Disconnect all plugs.
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
Mount the metal brackets with
the double DIN head unit The position of the copper
coloured holder can be adjusted
to your needs for perfect fit.
(see sample)
Loading...