Kenwood CAW2170-06 User Manual
8. Remove the 2 screws at the top of
the OEM head unit.
Installation Manual
Double DIN Kit
Mount the metal brackets with
the double DIN head unit
Remove the OEM head unit.
9. Place the mounting frame at the
dashboard. Push the metal frame
into the mounting frame. Fix the
mounting frame
The position of the copper
coloured holder can be adjusted
to your needs for perfect fit.
(see sample)
Rubber-Touch: CAW 2170-06-RT
• Mazda 6 (Type GH) 2008->
Compatible with these Kenwood double DIN devices
Kenwood Navigation
2
1
4
10. Connect all required circuit points
and push the double DIN head
unit in the metal frame until it
snaps in. Place the facia plate on
the mounting frame.
Reinstall everything in reverse
order to finish installation
© 05/2009 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
3
Double DIN Kit contents
• (1) Metal Frame
• (2) Mounting Frame
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
Installation Kit (3)
Facia Plate (4)
Installation Manual Double DIN Kit CAW 2170-06-RT Mazda 6 (Type GH) 2009->
1. Remove the air vent unit above
the OEM head unit
2. Remove the gear shift cover
3. Remove the side panels
at the left and right side
4. Remove the cup holder unit
5. Remove the silver panel of
the center console
6. Remove the air condition
control unit
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
7. Remove the screws at the
bottom of the OEM head unit.
( there are also two screws
at the top, see step 7 )
Loading...