Kenwood CAW2143-55 User Manual

Installation Manual Double DIN Kit

Standard: CAW 2143-55

• Hyundai ix55 / Veracruz

Compatible with these Kenwood double DIN devices

Kenwood Navigation

Double DIN Kit contents

• (1) Facia Plate

• (2) Mounting brackets

1. Unclip the air vents on the left and right side of the OEM head unit with a plastic wedge and remove them.

4. Mount the brackets to the Double-DIN Navigation

Place the Double-DIN Navigation on the dashboard, connect all required circuit points and ﬁx the brackets with the original screws.

2. Remove the screws (see arrows) on the left and right side of the OEM head unit

Remove the original mounting frame, the OEM head unit and the air condition control unit

3. Remove

- the display

- the air condition control unit

- the pocket

from the original mounting frame

5. Mount

- the display

- the air condition control unit

- the pocket to the new facia plate

Connect all required circuit points and place the new facia plate on the dash board

Reinstall everything in reverse order to ﬁnish installation.

All installation work must be performed by a qualiﬁed professional installer only. The manufacturer / dealer is not liable for any kind of incidential or indirect damages.