Page 1
Installation Manual
Double DIN Kit
Part-No.: CAW 2143-15
• Hyundai Santa Fe 2008->
Compatible with these Kenwood double DIN devices
Kenwood Navigation
2
© 07/2009 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
1
3
4
Double DIN Kit contents
• (2) Facia Plate
• (1) Mounting Bracket (L)
• (2) Mounting Bracket (R)
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
• (4) Fixing Screws
4 x
Page 2
Installation Manual Double DIN Kit CAW 2143-15
1. Hyundai Santa Fe dashboard
2. Remove the screws,
holding the center panel
3. Unclip the center panel
and remove it
5. Place the Kenwood Navigation
with the facia plate at the dash
board
Connect all required circuit points
Fix the facia plate to the
dashboard with four screws
6. Place the OEM front panel
Reinstall everything in reverse
order to finish installation.
4. Attach the mounting brackets
to the facia plate
Push the Kenwood Navigation into
the facia plate and fix it with screws
at both sides
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
Loading...