Kenwood CAW1270-04 User Manual

2-DIN CAW-1270-04

Installation manual for:

Saab 9.7 2006-->

Hummer H3 (EU)

Installation kit includes the following items:

* 1X 2-ISO 100 mm. metal bracket
* 1X Radio trim
* 1X Replacement panel
* 2X Mounting plates
* 2X Mounting spacers
* 2X Radio removal keys
* 4X Screws
* 2X Cushion

Use this hole

Use this hole

Kenwood DDX6029

We advice to use the following positions.
Other positions are also possible.

Use position 1 marked with a cross.
Use position 4 & 6 marked with an arrow.
Measured from left to right.

Kenwood DDX 7025

We advice to use the following positions.
Other positions are also possible.

Use position 1 marked with a cross.
Use position 14 & 16 marked with an arrow
Measured from left to right.

* Mount the plates.

2-DIN BKX-1321-042-DIN 12.301270-04

2-DIN CAW-1270-04

12

Remove the dashboardpanel around the
radio at the location of the arrows.
Then remove the orginal radio this is
thighten by four screws.
Remove the climate control unit.

3

Place the replacement panel.

Remove a piece of the plastic panel inside
the dashboard at the location of the
arrows.(this will give you a beter position
of the new headunit)

4

Place the 2-Din metal bracket.
Place the climate control unit.

5

56

Replace all panels in reversed order.

Connect all of the needed wiring harnesses and check the connections carefully.

Place the new headunit and the radio
trim.