Kenwood CAW1214-06 User Manual

2-DIN CAW-1214-06

2-DIN BKX-1214-06

Installation manual for:

Nissan Micra C + C

Installation kit includes the following items:

* 1X Replacement panel * 1X Mounting block

The 2-Din kit is only suitable if the car is equipped with a original 2-Din radio.

Partnumber: Blaupunkt BP 5387 5 4890427

If the car is equipped with a 1-Din radio shown in the left picture, then order a original 2-Din dashboard frame at the Nissan dealer.

Articlenumber: 68260-BC60D

Bezel article number 68260-BC60D

Remove the blind panel above the radio.

Remove the 2 screws above the radio.

Remove the 2 screws beneath the radio.

Move up the dashboard panel above the radio and remove the bolt under the dashboard panel. Remove the headunit.

2-DIN 12.301214-06

2-DIN BKX-1214-062-DIN CAW-1214-06

Remove the orginal headunit from the dashboard panel. Place the replacement panel behind the dashboard panel.

Mount the new headunit in the original bracket.

Mount the bracket with 4 screws.

Replace all the panels.

Place the mounting block on the rear of the new headunit between the metal bracket and the new headunit.

Connect all of the needed wiring harnesses and check the connections carefully.