Kenwood CAW1170-05 User Manual

2-DIN CAW-1170-05

Installation manual for:

Mazda 5 2005 -->

Installation kit includes the following items:

* 1X 2-ISO 100 mm. metal bracket
* 1X Radio trim
* 1X Replacement panel
* 2X Mounting plates
* 2X Mounting spacers
* 2X Radio removal keys
* 4X Screws
* 2X Cushion

Use this hole

Use this hole

Kenwood DDX6029

We advice to use the following positions.
Other positions are also possible.

Use position 1 marked with a cross.
Use position 7 & 9 marked with an arrow.
Measured from left to right.

Kenwood DDX 7025

We advice to use the following positions.
Other positions are also possible.

Use position 1 marked with a cross.
Use position 14 & 16 marked with an arrow
Measured from left to right.

* Mount the plates.

2-DIN CAW-1170-05

12

Remove the panel around the gear lever.

3

Remove the screws behind the panel
shown in 3A. This should be removed on
the passenger and driver side. Remove
the panel.

Remove the screws on the location of the
arrows shown in 3.

3A

Remove the screw at the location of the
arrow.

4

Remove the original radio panel.

5

Place the replacement frame and place
the 2-Din metal bracket.

Use the clips from the original panel to
tighten the replacement panel.

6

Place the headunit and radio trim.

Connect all of the needed wiring harnesses and check the connections carefully.