Kenwood 325HD60X User Manual

Page 1
Head Office Address:
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
Designed and engineered by Kenwood in the UK
Made in China
19144/3
BL450 series
Page 2
Use your blender for soups, drinks, pâtés, mayonnaise, breadcrumbs, biscuit crumbs, chopping nuts and crushing ice. Use your mill for milling herbs, nuts and coffee beans.
before using your Kenwood appliance
Read these instructions carefully and retain for future reference.
Remove all packaging and any labels.
Wash the parts: see ‘care and cleaning’.
safety
Switch off and unplug:
before fitting or removing parts;
when not in use;
before cleaning.
Always unplug the appliance before putting your hands or utensils in the goblet.
Always take care when handling the blade assembly and avoid touching the cutting edge of the blades when cleaning.
Only operate the blender with the lid in place.
Only use the goblet with the blade assembly supplied.
Never let the power unit, cord or plug get wet.
Never use a damaged appliance. Get it checked or repaired: see ‘service and customer care’.
Never use an unauthorised attachment.
Liquids should be allowed to cool to room temperature before blending.
Never leave the appliance unattended when it is operating.
When removing the blender or mill from the power unit:
wait until the blades have completely stopped;
don’t accidentally unscrew the goblet or mill jar from the blade assembly.
Never run the blender empty.
Never blend more than the maximum capacity stated in the recommended speed chart.
To ensure long life of your blender, do not run it for longer than 60 seconds or the mill for longer than 30 seconds.
Smoothie recipes - never blend frozen ingredients that have formed a solid mass during freezing, break it up before adding to the goblet.
Don’t use the blender as a storage container. Keep it empty before and after use.
Always use the blender on a secure, dry level surface.
Never place this appliance on or near a hot gas or electric burner or where it could touch a heated appliance.
Misuse of your blender can result in injury.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.
before plugging in
Make sure your electricity supply is the same as the one shown on the underside of the appliance.
English
2
Page 3
Important - UK only
The wires in the cord are coloured as follows: Blue = Neutral Brown = Live.
The appliance must be protected by a 3A approved (BS1362) fuse.
Note:
For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).
If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.
This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food.
key
blender
filler caplocking lidgobletsealing ringblade unitspeed + pulse controlpower unitcord storage
mill (if supplied)
mill jarstorage lid
to use your blender
1 Fit the sealing ring - ensuring the
seal is fully located under the rim of the blade unit.
Leaking will occur if the seal is damaged or incorrectly fitted.
2 Screw the blade unit onto the goblet
. Refer to the graphics on the
underside of the blade unit as follows:
- unlocked position
- locked position 3 Put your ingredients into the goblet. 4 Put the filler cap in the lid. 5 Fit the lid to the goblet and turn
clockwise to lock.
6 Place the blender onto the power
unit and turn clockwise to lock
.
The appliance won’t work if the blender is incorrectly fitted.
7 Select a speed (refer to the
recommended speed chart).
hints
To blend dry ingredients - cut into pieces, remove the filler cap, then with the machine running, drop the pieces down one by one. Keep your hand over the opening. For best results empty regularly.
The processing of spices is not recommended as they may damage the plastic parts.
When making mayonnaise, put all the ingredients, except the oil, into the blender. Remove the filler cap. Then, with the appliance running, add the oil slowly through the hole in the lid.
Thick mixtures, e.g. pâtés and dips, may need scraping down. If the mixture is difficult to process, add more liquid.
3
Page 4
to use your mill
1 Put your ingredients into the jar. Fill it
no more than half full.
2 Fit the sealing ring
- ensuring the
seal is fully located under the rim of the blade unit.
Ensure that the seal is fitted correctly.
3Turn the blade unit
upside down.
Lower it into the jar, blades down
.
Turn anti-clockwise to lock.
4Place the mill onto the power unit
and turn clockwise to lock
.
5 Select a speed or use the pulse
control.
6 After milling, you can replace the
blade unit with the storage lid.
4
recommended speed chart
speed usage/food items max. quantity
1 Frothing milk 1 litre
Light mixes e.g. batters, milkshakes, scrambled egg 1 litre
2 Soups & drinks 1.6 litres
Thicker mixes e.g. pâtés
Mayonnaise 3 eggs + 450ml
oil
Smoothie drinks Place the fresh fruit and liquid ingredients in 800ml first (includes yoghurt, milk and fruit juices) liquid Then add ice or frozen ingredients (includes frozen fruit, ice or ice cream)
Mill - use for dry ingredients only 50g Herbs, nuts and coffee beans
(P) Operates the motor in a start/stop action. The
pulse pulse will operate for as long as it is held in
position.
Ice crushing - operate the pulse in short bursts 6 cubes until crushed to the desired consistency.
care and cleaning
Always switch off, unplug and dismantle before cleaning.
Empty the goblet before unscrewing it from the blade unit.
Don’t immerse the blade unit in water.
Do not place any parts in the dishwasher.
power unit
Wipe with a damp cloth, then dry.
Don’t immerse the power unit in water.
Push excess cord inside the back of the power unit.
blade assembly
1 Remove the blade unit from the
goblet or mill by turning to the
unlock position to release. 2 Remove and wash the sealing ring. 3 Don’t touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don’t immerse the
blade unit in water.
4 Leave to dry upside down.
other parts
Wash by hand, then dry.
Page 5
service and customer care
If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer.
UK
If you need help with:
using your appliance or
servicing, spare parts or repairs (in or out of guarantee)
call Kenwood customer care on 023
9239 2333. Have your model
number (ie BL450) and date code (4 digit code ie 6T41) ready. They are on the underside of
the power unit.
spares and attachments
call 0870 2413653.
other countries
Contact the shop where you bought your appliance.
Designed and engineered by Kenwood in the UK.
Made in China.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.
guarantee (uk only)
If your blender goes wrong within
one year from the date you bought
it, we will repair it (or replace it if
necessary) free of charge provided:
you have not misused, neglected or
damaged it;
it has not been modified (unless by
Kenwood);
it is not second-hand;
it has not been used commercially;
you have not fitted a plug incorrectly;
and
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
5
Page 6
carrot and coriander soup
25g butter 50g onion chopped 1 clove garlic crushed 640g carrot cut into 1
1
2 cm cubes cold chicken stock 10-15ml (2-3tsp) ground coriander salt and pepper
1 Melt the butter in a pan, add the
onion and garlic and fry until soft.
2 Place the carrot into the liquidiser,
add the onion and garlic. Add sufficient stock to reach the 1.6 L level marked on the goblet. Fit the lid and filler cap.
3 Blend on maximum speed for 5
seconds for a coarse soup or longer for a finer result.
4Transfer the mixture to a saucepan,
add the coriander and seasoning and simmer the soup for 30 to 35 minutes or until cooked.
5 Adjust the seasoning as necessary
and add extra liquid if required.
6
Loading...