Kenwood 1060VR User Manual
Specifications and Main Features
- Model: 1070VR/1060VR
- AC voltage: 120 v (USA and Canada). 119-120/220-240 v (rest of the world).
- In terms of rated power, 1070vr is rated at 120 watts per channel at 8 ohms, while 1060 can support up to 110 watts per channel at 8 ohms.
- 1070vr has a Thomas Hart Benton Distortion THD of 0.015%, similarly, 1060 too has a THD of the same rating.
- 5HZ – 85 kHz +0.5 dB + 3 dB is the frequency response of both models.
- PHONO (MM) has a signal to noise ratio of 75 dB, while, CD has a 95 DB ratio.
- Input sensitivity is PHONO (MM): 2.5mV / 47kΩ, and CD: 200mV / 47kΩ
- Output impedance for Tape REC is 200mV/1kΩ; Center and Surround is 1V/600Ω; Subwoofer is1V/10Ω
- The dimensions for the aided product is 440 mm [Width] , 147 mm [Height] ,1500mm [Depth]
- Weight of the 1070VR model is 11kg and that for the 1060VR is 10kg.
- A, B speaker systems compatible depending on the required impedance . Additionally supported formats include: Dolby pro logic, Dolby 3 stereo and DSP modes.
- Remote command: Universal control that operates all suitable audio/video parts.
- Macro play feature: Makes it possible to undertake a chain of operations in a sequence for a single command.
- Power consumption:
- 1070VR: 2.94 A
- 1060VR: 2.54 A
Frequently Asked Questions
Q: What is the total power output for the 1070VR model in watts?
A: This device has a Total power output of 120watts per channel at 8 ohm load for the 1070VR model.
Q: Are there alternative voltages at which the receiver can operate apart from the one specified?
A: The receiving device was designed to operate in 119-120 / 220-240 Volt and it is possible to set this voltage with the appropriate switch.
Q: Is remote control part of the device purchased?
A: Yes, such a remote control is provided, it is compatible with other video and audio devices and hence termed as universal IR remote control.
Q: I would like to know the subwoofer volume levels adjustment for this routine?
A: You may want to tackle this problem by first pressing the SUB WOOFER key on the remote and then using the VOLUME control keys to increase the subwoofer volume to the level needed.
Q: Sound distortion: how do I proceed in case it occurs?
A: Ensure that all connections of the speakers are appropriately plugged, ensure that there are no any short circuits, and ensure that the volume is set to a desirable level. Otherwise, check that the source is configured and working correctly.
Q: Is there a limit to how many preset radio stations I can set?
A: The system can save up to 40 preset radio stations within its memory.
Q: Why should I alter the mode for DSP?
A: The mode of DSP is an abbreviation for Digital Signal Processing which enables multiple sound simulations to be experienced such as “ARENA,” “JAZZ CLUB,” and “STADIUM” which improves sound quality.
Q: n what way is resetting the microcomputer possible if the unit does not function normally?
A: Resetting it is simple by disconnecting the power cord, simultaneously pressing and holding the POWER button, and then connecting the cord to the power source.
User Manual
Loading...