Kentrox DataSmart DSU, DataSmart 486, DataSmart CSUs, DataSmart E1, DataSmart FE1 User Manual

DataSMART ® 486 and 488

E1/FE1 Frame Monitoring DSU/CSUs

DataSMART E1/FE1
Frame Monitoring
DSU/CSUs provide
comprehensive, easy­to-use, end-to-end
circuit monitoring to
improve Frame Relay
network performance.

E1/FE1 Frame Monitoring

DSU/CSUs

With DataSMART Frame Monitoring DSU/CSUs,
service providers and network managers have the tools
to deliver reliable, high-performance Frame Relay
services. Frame Monitoring DSU/CSUs help verify
Service Level Agreements between the PTT and
customer, match bandwidth to application needs, and
isolate performance problems to the LAN, the WAN, or
the local loop.

DataSMART DSU/CSUs maximize your network
uptime with convenient management features, such as
in-band access for simplified remote management.
Each DSU/CSU includes an integrated Ethernet port and
a front-panel LCD for easy local management, along with
standards-based SNMP management.

DataSMART E1/FE1 Frame Monitoring DSU/CSUs,
teamed with FrameVision Reporter software, deliver the
tools and information necessary to ensure ongoing
savings – and a quick return on investment.

Provide end-to-end circuit
monitoring for Frame Relay
networks

n Identify when bandwidth

adjustments are needed

n Isolate the source of slow

network performance: the
LAN, local loop, or WAN

n G.704 performance monitoring

for E1 services

n X.21/V.35 data port available

for a variety of equipment

n Add/drop voice port available

for voice and data traffic
integration

n Standards-based, in-band

management with SNMP

n Easy local management with

10Base-T access and
front-panel LCD

n Free DataSMART

and Alarms Utility software

n 5-year manufacturer’s

warranty ensures reliability

®

Installer

DataSMART

E1/FE1 Frame Monitoring DSU/CSUs

DataSMART E1/FE1 Frame Monitoring DSU/CSU Product Portfolio:

PHYSICAL INTERFACE PROTOCOLS USER PORTS

NETWORK USER NETWORK OR VIDEO VOICE RATES

DataSMART 486 E1 X.21 Clear Channel 1 0 Nx64k,
Single-Port FE1 V.35 Frame Relay 2.048 Mbps

DataSMART 488 E1 X.21 Clear Channel 1 1 Nx64k,
Single-Port FE1 V.35 Frame Relay 2.048 Mbps
Add/Drop EIA-530

The DataSMART 486 and 488 support FrameVision Reporter software to deliver key
performance measurements on individual customer circuits.

The DataSMART 488 integrates voice and data traffic onto a single E1/FE1 line.

With in-band management and local Ethernet connectivity, the DataSMART 486 and
488 can be managed easily from a remote or local site. The management system
can be located anywhere on the business network.

EIA-530
RS449

RS449
E1/FE1

DATA

Verify Frame Relay performance

DataSMART Frame Monitoring
DSU/CSUs help you isolate circuit
availability problems and measure
round-trip delay from DSU to DSU.

You can see the exact time a service
outage occurred and how long it
lasted, to determine if it was an
isolated incident or a chronic problem.

You can monitor bandwidth utilization
at the port and virtual circuit to deter­mine the right bandwidth to meet your
application requirements.

Advanced management and
diagnostics

The DataSMART DSU/CSUs have
advanced management features that
enable you to take active control of
your network, such as in-band SNMP
management and an integrated
Ethernet port. Comprehensive E1
diagnostic tools help you identify and
resolve performance issues in the
Frame Relay local loop before they
affect service. With the DataSMART,
you can remotely configure your units,
and receive SNMP traps for important
network events.

Standards-based Management

The DataSMART embedded SNMP
agent supports SETs, GETs and Traps,
as well as standard MIBs, such as
MIB II and the E1 MIB. And for compre­hensive control, an enterprise MIB
supports all available functions. These
MIBs are available on the ADC Kentrox
web site (www.kentrox.com).

DataSMART Installer for Windows

Free with each unit, DataSMART
Installer software is an intuitive,
Windows-based utility that
dramatically reduces setup time.

Alarms Utility

Downloadable free from
www.kentrox.com, Alarms Utility
monitors the entire network for inter­face and device errors, posting them to
the event log in an HP OpenView
management system. Customer icons
uniquely identify all ADC Kentrox
devices for easy recognition by the
Network Node Manager.

Specifications

E1/FE1 Frame Monitoring DSU/CSUs

NETWORK INTERFACE

Line Rate E1 (2048 Kbps) + 50 ppm
Framing G.704
Line Code HDB3
Protocol Clear Channel

Line Impedance

Mechanical

Lightning Protection

TERMINAL INTERFACE (DataSMART 488)

Line Rate E1 (2048 Kbps) + 50 ppm
Framing G.704
Line Code HDB3
Protocol Clear Channel (DS0)
Line Impedance

Mechanical

DATA PORT INTERFACE

Bit Rate Nx64 kbps (N=1...31)
Electrical V.35 compatible

Mechanical

MANAGEMENT

Control Ports

Ethernet Port

SNMP Agent

In-band From network or router

LCD Front panel display of unit status

Frame Relay

10Ω at 1024 KHz

120Ω +

10Ω at 1024 KHz

75Ω +
DA15 socket for 120Ω

Adapter for 75Ω BNC

120Ω interface withstands lightning
surges defined per FCC Part 68, and
unit recovers

10Ω at 1024 KHz

120Ω +

10Ω at 1024 KHz

75Ω +
DA15 socket for 120Ω

Adapter for 75Ω BNC

X.21 via adapter
V.11/X.27/EIA-530

DB25 socket

DCE and DTE
EIA-574
DE9 socket
Daisy chain

38.4 kbps maximum
English menus
Async ASCII or SLIP/PPP

10Base-T RJ45 socket
Transmit and receive LEDs

MIB II (RFC 1213)
DS1/E1 MIB (RFC 1406)
Frame Relay MIB (RFC 1315)
Enterprise MIB*
TELNET server
Responds to Ping
Security filters
(for IP source addresses)
Up to 10 SNMP Trap hosts

Shared or dedicated VC
Frame Relay or ATM DXI

Front panel configuration of unit

ALARMS

Traps SNMP Traps via SLIP/PPP, Ethernet or
ASCII Transmitted out async control port

in-band

FRAME RELAY CIRCUIT MANAGEMENT

Methodology

Virtual Circuit (VC) Traffic

VC Status

VC Traffic Detail Measurement Intervals

VC Delay Measurements

VC Delay Diagnostics

Frame Relay Performance Thresholds

Frame Relay Statistics

Reports Frame statistical

Non-intrusive, in-band

Group Measurements: % bandwidth
utilization, kbps, delays, VC status
(24 hour)

Detail: Frames, octets, kbps, delay
measurements, VC status

Up, down, BECN set, FECN set, DE set,
bandwidth utilization threshold exceeded,
delay threshold exceeded

Current/previous second; cur/prev 15
min; cur/prev 2 hour; cur 24 hour;
previous 7 complete days, 12 2-hour
intervals for current day

Maximum observed delay, average delay,
attempts made, measurement packets
lost Automatic delay measurements for
up to 64 active VCs

Round-trip VC delay via in-band

User configurable
Access bandwidth utilization
Round-trip delay

Non-integral number of octets
Invalid header address
Invalid HDLC FCS
Aborted frames
FPING responses lost (system total)

Frame group (VC summary)
Frame individual (VC detail)
Frame VC utilization
Burst: data sent above CIR and above

excess burst rates

LOCAL LOOP DIAGNOSTICS

Loop Tests

Line Test Codes

Data Test Codes

BERT Tester

Line loopback
Payload loopback
Data port loopback

23

-1, 215-1, QRS, 3-in-24, 1-in-8, All 1s,

2
All 0s

511, 2047

Independent BERT on all test codes

LOCAL LOOP
PERFORMANCE MONITORING

Data Storage

Monitors Network and terminal interface
Reports Based on G.821 for performance

Last 24 hours of data in 15 minute
increments; last 7 days of data in
24-hour increments

Far end
Alarm history
Network interface statistical
Terminal interface statistical

(add/drop only)

DIAGNOSTICS

LEDs Power/fail

Loop Tests

E1
Data port transmit
Data port receive
Data port CTS
Data port RTS

Local loopback
Data terminal loopback
Terminal interface loopback

(add/drop only)

STANDARDS

EN60590
EN55022 Class B
EN50081-2
ITU G.703, G.704, G.821
BABT NTR4, CTR 12, CTR 13

REGULATORY (Call for current status)

ACN Australian Communications Authority and
BABT NTR 4

CE 0682
TUV GS

Spectrum Management

_X_

ENVIRONMENT

Operating 0° to 50° C

Storage -20° to 66° C

5% to 90% RH, non-condensing

5% to 65% RH

POWER

AC 85-265 VAC, 47-63 Hz, 8W

PHYSICAL

Usage Desktop or tray mount
Dimensions

Weight 1.14 kg (approx.)

*MIB files available at www.kentrox.com.

19.68 cm W x 4.32 cm H x 29.21 cm D

DataSMART

E1/FE1 Frame Monitoring DSU/CSUs

DataSMART 486 E1/FE1

Frame Monitoring DSU/CSU

1

3 42

DataSMART 488 E1/FE1 Add/Drop

Frame Monitoring DSU/CSU

Ordering Guide

Description Model No.

Frame Monitoring DSU/CSUs

DataSMART 486 E1/FE1 72486
Frame Monitoring DSU/CSU
DataSMART 488 E1/FE1 Add/Drop 72488
Frame Monitoring DSU/CSU

Mounting Accessories

Mounting Tray, 1 Stand-alone unit 78031

Management and Reporting Software

FrameVision Reporter 70304
DataSMART Installer 70305
Alarms Utility 70451

*Call for availability.

*

1 1

3 42

Back Panel & Cable Guide
To Network and Terminal Equipment

1

930xx091 DA15P to DA15S
930xx101 DA15P to Stub
930xx121 DA15P to RJ48C Modular Plug
930xx131 DA15P to DA15P
77892 DA15P to RJ48C Socket Adapter
77895 DA15P to 2 x 75 ohm Socket Coaxial

960xx009 BNC Plug to BNC Socket
960xx010 BNC Plug to BNC Plug
93005132 DA15P to DA15P, Crossover
77993003 DA15P to Barrier Strip Adapter

2

To Control Terminal

95006022 DE9S to DE9P, 6 ft. (2.4 m)
95005023 DE9S to DB25P, 5 ft. (2 m)
93001211 DE9P to RJ48, Cisco 2500 SLIP

Adapter

To Control Port

78899 DE9S to RJ45 Adapter
78891 DataSMART Installation Kit

Copyright 1998, ADC Kentrox. An Equal Opportunity Employer. DataSMART is a registered trademark and FrameVision is a trademark of
Kentrox Industries, Inc., dba ADC Kentrox. ADC Kentrox is a registered trademark of ADC Telecommunications, Inc. These trademarks
are registered in the U.S. Patent and Trademark Office and may be registered in other countries. All other trademarks mentioned are the
property of their respective companies. Specifications published here are current or planned as of the date of publication. ADC Kentrox
reserves the right to change specifications without prior notice. You may verify product specifications by contacting any of our offices.

To Data Equipment

3

V.35

95010054 DB25P to MRAC34P, 10 ft. (4 m)
95010073 DB25P to MRAC34P, tail circuit timing

95001074 DB25P to MRAC34S, 1 ft. (0.4 m)
78904 DB25P to MRAC34S Adapter

X.21

78902 DB25P to DA15S, X.21 Adapter
95010061 DB25P to DB25P, 10 ft. (4 m)
95010058 DB25P to DB25P, tail circuit timing (DCE

95010066 DB25P to DC37P (EIA-530 to RS449)

To 10Base-T LAN

4

95007077 RJ45 Plug to RJ45 Plug,

95007078 RJ45 Plug to RJ45 Plug, Crossover,

NOTE: xx denotes length of cable, contact factory
for available lengths. DA, DB, DC, DE designate the
size of the shell which encapsulates the cable
connector.

P = Plug (male); S = Socket (female).

(DCE to DCE)

to DCE)

Cat. 3 UTP, 7 ft. (2.8 m)

Cat. 3 UTP, 7 ft. (2.8 m)

Worldwide Sales Offices

Corporate

Headquarters [phone]

Australia [phone]

Belgium [phone]

Canada [phone]

China [phone]

Germany [phone]

Korea [phone]

Latin America [phone]

Singapore [phone]

United Kingdom [phone]

ADC Kentrox
14375 NW Science Park Drive
Portland, Oregon 97229
[phone]
[phone]

FAX [phone]

Web Site www.kentrox.com

E-mail [e-mail]

Pre-sales Support [phone]

Literature Hotline [phone]

8/98 05-04-007