Ken Tool 34950 User Manual

IronMan™ Ergonomic Wheel Lifting Bar #34950

gg

HUB SIDE DOWN

Instruction Manual

Part No. 34950-98

Insert spoon end into spoke
hole with curved side toward
the center of the wheel…

…and pull bar straight
toward you to raise the
assembly.

…until the tip touches the
floor.

Stop assembly when it is
fully upright.

Set foot on tire …

See Video Demo at www.kentool.com

768 E. North Street, Akron, Ohio 44305; Phone: [phone], Fax: [phone]

Website: www.kentool.com E-Mail: [e-mail]

1

IronMan™ Ergonomic Wheel Lifting Bar #34950

gg

Here are some Safety Rules

HUB SIDE UP

Instruction Manual

Part No. 34950-98

Insert knob end into lug hole
on side of assembly closest
to you…

…and pull bar straight
toward you to raise the
assembly.

While servicing tires, always follow OSHA Reg. CFR1910.177.

…until the knob rests on the
hub.

Stop assembly when it is
fully upright.

WARNING

TIRE CHANGING IS DANGEROUS!

Set foot on tire …

If you don’t know how to use tire changing tools – STOP!

Tire changing should only be done by trained perso ns.

If you do it wrong, you could be hurt or killed.

.
For complete tire servicing procedures, read the tire
and rim makers’ service manuals. You can also get

free wall charts about tire servicing by calling OSHA.

768 E. North Street, Akron, Ohio 44305; Phone: [phone], Fax: [phone]

Website: www.kentool.com E-Mail: [e-mail]

2