Kenroy Home 93838GAL, 93279 Use And Care Manual

USE AND CARE GUIDE

1 LIGHT OUTDOOR WALL LANTERN-100 WATT

Above image represents many lanterns,

your lantern may vary in style.

Questions, problems, missing parts? Before returning to the store,

call Kenroy Home Customer Service

8 a.m.-6 p.m., EST, Monday-Friday

904-642-4340

THANK YOU

We appreciate the trust and confidence you have placed in Kenroy Home through the purchase of this lantern.

We strive to continually create quality products designed to enhance your home.

Thank you for choosing us!

Table of Contents

Safety Information ....................................................................................................................................... 2

Warranty ...................................................................................................................................................... 2

Pre-Installation ............................................................................................................................................ 3

Planning Installation ............................................................................................................................. 3

Package Contents .................................................................................................................................. 4

Installation ............................................................................................................................................5, 6, 7

Care and Cleaning ........................................................................................................................................ 7

Troubleshooting ............................................................................................................................................ 7

Safety Information

□ Consult a qualified electrician with any

electrical questions you may have.

IMPORTANT: Inspect the wire insulation for
any cuts, abrasions, or exposed copper that may
have occurred during shipping. If there is a
defect in the wire, do not continue the assembly
process. Please call our Customer Service Team
at 904-642-4340.

Warranty

1-YEAR LIMITED WARRANTY

WHAT IS COVERED

The manufacturer warrants this lantern to be free from defects in the materials and workmanship for a period
of one (1) year from date of purchase. This warranty applies only to the original consumer purchaser and
only to products used in normal use. If this product is found to be defective, the manufacturer's only
obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer's
discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications,
alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been
improperly installed, assembled, or used in any way not in accordance with the instructions supplied with the
product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse,
negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship.

WHAT IS NOT COVERED

This warranty shall not apply to the finish on any portion of the product due to weathering, as this is
considered normal wear. The manufacturer does not warrant and specifically disclaims any warranty, whether
expressed or implied, other than the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or damage, including but not limited
to, any labor or expense costs involved in the replacement or repair of the product.

Contact the Customer Service Team at 904-642-4340.

2

Pre-Installation

PLANNING INSTALLATION

Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet

or cardboard. Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.

NOTE: This lantern requires the use of one 120V, 60Hz,
100-Watt max, medium-base type A bulb (not included).
Do not exceed the recommended wattage.

TOOLS REQUIRED

Phillips

screwdriver

Wire
strippers

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Flathead
screwdriver

Wire cutters

Electrical
tape

Ladder

AA BB CC

Part
AA
BB

CC
DD
EE

Description
Wire nut
Mounting plate assembly
Outlet box screw
Finial
Ground screw

EEDD

Quantity

3
1

2
2
1

3