Kennedy KBC4A, KEN-503-0320K Instruction Manual
AUTOMATIC BATTERY CHARGER
- 12/6V 4A
INSTRUCTION MANUAL
www.kennedy-tools.co.uk
LOW VOLTAGE DIRECTIVE 2006/95/EC
EMC DIRECTIVE 2004/108/EC
DECLARATION OF CONFORMITY
We hereby certify that the KENNEDY AUTOMATIC BATTERY CHARGER - 12/6V - 4A
complies with all the relevant provisions of the EC Directive 2006/95/EC
Harmonised Standards Applied: EN 60335-2-29: 2004 to be used in conjunction with
EN 60335-1: 2002 + A11: 2004 + A1: 2004 + A12: 2006 + A2: 2006 + A13: 2008
and EN 62233: 2008
and the EMC Directive 2004/108/EC
Harmonised Standards Applied: EN 55014-1: 2006, EN 55014-2: 1997/+ A2: 2001,
EN 61000-3-2: 2006, and EN 61000-3-3:1995/+A1:2001/+A2:2005.
Manufactured for
KENNEDY TOOLS
Wigtston, Leicester, England, LE18 2FS.
Signed:
Name: Keith Read
Position: HSQE Group Manager
QUALITY GUARANTEE & WARRANTY
KENNEDY TOOLS carry a one year manufacturers warranty.
KENNEDY TOOLS are designed & manufactured
to the highest standards & specifications.
Assuring the quality and performance required by all sectors of industry.
KENNEDY TOOLS are fully guaranteed against
faulty materials & workmanship.
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
Please retain supplier invoice as proof of purchase.
© The Kennedy Group Ltd. 10/12
KENNEDY TOOLS
Wigston, Leicester, England, LE18 2FS.
Kennedy is a registered trade mark of The Kennedy Group Ltd.
Supplied by an ISO9001 approved company
Whilst every effort has been made to ensure the accuracy of information contained in this instruction manual, the Kennedy Tools
policy of continuous improvement determines the right to change data, specifications and component parts without prior notice.
l For WET batteries, AGM technology and GEL batteries
l Optimised charging pro gramme
l Efficient 3 stage charge
l 100% rated output
l LED indicator: POWER/FULL/FAULT
l LEDs to indicate the battery level of charge
l Portable and lightweight
l Intelligent circuit control and protection
MODEL KBC4A
KEN-503-0320K
KEN-503-0320K_INSTRUCTIONS_Layout 1 16/11/2012 14:48 Page 1
2
KENNEDY
thoroughly recommends reading these instructions before using
the Battery Charger, even if you have used one before. Please pay particular
attention to the Safety Guidelines and Warnings. Reading these instructions
carefully and understanding them fully will enable you to perform tasks correctly
and will prevent injury to yourself or someone else as well as prevent damage to
the vehicle and equipment. Please keep this instruction manual in a safe place for
future reference.
SAFETY GUIDELINES
IMPORTANT
l
This appliance is not intended for use by
persons (including children) with reduced
physical sensory or mental capabilites, or
lack of experience or knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should
be supervised to ensure that they do not
play with the appliance.
l Working in the vicinity of a lead-acid battery
is dangerous. Batteries generate explosive
gases during normal battery operation. For
this reason, it is of utmost importance that
you read this manual and follow the
instructions exactly before each use.
l Read and follow the instructions of any
equipment you intend to use in the vicinity of
the battery.
l Use the charger indoors only, do not expose
to rain or snow.
GENERAL SAFETY
l
Use charger for charging LEAD-ACID battery
only. DO NOT use battery charger for other
types of batteries, these may burst and
cause injury to persons and damage to
property.
l Use output socket for supply power to
appliance with rated voltage DC12V and
rated current less than 12A only.
l Use only attachments recommended or sold
by manufacturer.
l When disconnecting the battery charger, pull
by the plug not by the cord as this may cause
damage.
l DO NOT operate charger with damaged cord
or plug. Have cord replaced immediately.
l DO NOT operate charger if it has received a
sharp blow, been dropped, or otherwise
damaged in anyway.
l DO NOT disassemble charger. Take it to a
qualified professional when service or repair
is required. Incorrect reassembly may result
in electric shock or fire.
l To reduce risk of electric shock, unplug
charger from outlet before attempting any
maintenance or cleaning.
l DO NOT use an extension cord unless
absolutely necessary. Use of an improper
extension cord could result in fire or electric
shock. If an extension cord must be used,
make sure that:
- Pins on plug of extension cord are the
same number, size, and shape as those of
plug on charger.
- Extension cord is properly wired and in
good electrical condition.
- Wire size is large enough for AC ampere
rating or charger.
l Always charge battery in a well ventilated
area. NEVER operate in a closed-in or
restricted area.
WARNING: Risk of explosive gas.
l Locate charger as far away from battery as
DC charger cables permit.
l NEVER charge a frozen battery. If battery fluid
THE ENVIRONMENT
QUALITY KENNEDY AUTOMOTIVE PRODUCTS
AVAILABLE FROM YOUR DISTRIBUTOR
ACTION
Swith OFF power
immediately at the
mains
Swith OFF power
immediately at the
mains
SOLUTION
1. Ensure there is no damage to any of the leads.
2. Make sure the crocodile clips are making good
contact with the battery posts.
3. Switch on the power at the mains and check again.
1. Ensure the output leads are not touching.
2. Ensure that the RED lead is connected to the +
(POS) battery terminal and the BLACK lead is connected to the - (NEGATIVE) battery terminal.
3. Switch on the power at the mains and check again.
FAULT
Panel lights fail to light
Panel lights flicker and
go out
TROUBLE SHOOTING
Always dispose of unwanted tools, accessories and packaging materials in an environmentally
friendly manner.
For EU and EEA countries only.
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE) and its implementation in accordance with national law, electrical goods that have
reached the end of their life must be collected separately and returned to an environmentally
compatible recycling facility.
Do not dispose of electrical goods with domestic waste materials as inappropriate disposal
may cause potential hazards to the environment and human health.
For further information, please contact your local authority or the retailer from whom you
purchased the product.
This product does not contain any restricted substances in concentrations and applications
which are banned by the European RoHS Directive.
KEN-503-0320K_INSTRUCTIONS_Layout 1 16/11/2012 14:48 Page 2
Loading...