Kenmore Pro 2534433360A, 25344333609, 25344333608, 25344333607, 25344333606 Owner’s Manual

...
"[M
Side by Side Refrigerator
Use & Care Guide
Lado a Lado Refrigerador
Guia para su uso y cuidado
Compartiments C6te _ C6te
Guide d'utilisation et d'entretien
R_frig_rateur
Sears, Roebuck and Co., Hoffman Estates, JL 60179 U.S.A.
Sears Canada, inc., Toronto, Ontario, Canada IVl5B 2B8
m
www.sears.com
241702402 (0606)
Congratulations on your purchase of a new refrigerator! We here at Sears are very proud of our product and we are
completely committed to providing you with the best service possible. Your satisfaction is our #1 priority.
We know you'll enjoy your new refrigerator and ThankYou for choosing our product. We hope you consider us for future purchases.
PLEASE READ AND SAVE THESE
iNSTRUCTIONS
This Owner's Guide provides specific operating instructions for your model. Use your refrigerator only as
instructed in this manual. These instructions are not meant to cover every possible condition and situation that may
occur. Common sense and caution must be practiced when installing, operating and maintaining any appliance.
Please record your model and serial numbers below
for future reference. This information is found on the serial plate located inside the refrigerator
compartment.
NOTE: Use on!y soap and water to clean serial plate.
Model Number: 253
or: 970
Serial Number:
Purchase Date:
ITABLEOFCONTENTS
Welcome & Congratulations ................ 2
Important Safety nstructions ............... 2-3
Warranty Information ........................... 3
Protection Agreement ......................... 4
Installation ........................................... 5-6
Door Removal Instructions ................. 7
Features At A Glance ......................... 8
Temperature Controls .......................... 9-11
Looking Inside ..................................... 12-13
Automatic Ice & Water Dispenser ....... 14-16
Front Water Filter ................................. 17
Replacing the Air Filter ........................ 18
Food Storage & Energy Saving Tips ... 19
Normal Operating Sounds & Sights .... 20
Care & Cleaning .................................. 21-22
Before You Call .................................... 23-27
P easeReadA, "struCt 0,,BefOre
UsingThis Refrigerator.
FOR YOUR SAFETY
Do not store or use gasoline, or other flammable liquids in the vicinity of this or any other appliance. Read product labels for warnings regarding flammability and other
hazards.
Do not operate the refrigerator inthe presence of explosive fumes.
Avoid contact with any moving parts of automatic ice maker.
Remove all staples from the carton. Staples can cause severe cuts, and also destroy finishes if they come in contact with other appliances or furnitu re.
CHILD SAFETY Destroy or recycle the carton, plastic bags, and any
exterior wrapping material immediately after the refrigerator is unpacked. Children should NEVER use these itemsto
play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause suffocation.
PROPER DISPOSAL OF YOUR REFRIGERATOR OR FREEZER
Risk of child entrapment .........
Child entrapment and suffocation are not problems of the past. Junked orabandoned refrigerators or freezers are still dangerous - even if they will sit for "just a few days." ifyou are getting rid of your old refrigerator or freezer, please
follow the instructions below to help prevent accidents.
Before you throw away your old refrigerator/freezer:
Remove doors. Leave shelves in place so children may not easily climb
inside. Have refrigerant removed by a qualified service
technician.
i( i i! KENMORE PRO APPMANCE WARRANTY
One Year Limited Warranty
These Guidelines Must Be FoHowedToEnsureThat When installed, operated and maintained according to all
Safety Mechanisms InThisRefrigeratorWill Operate instructions supplied with the product, if this appliance fails
Properly. due to a defect in material or workmanship within one year
from the date of purchase, call 1-800-4-MY-HOME ® to arrange
ELECTRICAL INFORMATION
The refrigerator must be plugged into its own dedicated 115 Volt, 60 Hz., AC only electric outlet. The power cord of the appliance is equipped with a three-prong grounding plug for your protection against
electrical shock hazards, it must be plugged directly into a properly grounded three-prong receptacle. The receptacle must be installed in accordance with local
codes and ordinances. Consult a qualified electrician.
Do not use an extension cord or adapter plug.
Immediately repair or replace any power cord that
becomes frayed or damaged.
Never unplug the refrigerator by pulling on the power cord. Always grip the plug firmly, and pull straight out from the receptacle to prevent damaging the power cord.
Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock.
Performance may be affected if the voltage varies by
10% or more. Operating the refrigerator with insufficient power can damage the compressor. Such damage is
not covered under your warranty.
Do not plug the unit into an outlet controlled by a wall switch or pull cord to prevent the refrigerator from being turned off accidentally.
Avoidconnecting refrigerator toa Ground Fault Interrupter
(GFI) circuit.
iMPORTANT
Pressing and holding the On/Off button for 3 seconds.
located on the leftside ofthe temperatu recontrol panel. will disable your refrigerator's cooling system, but does not disconnect the power to the light bulb and other electrical components. To turn off power to your
refrige "ator you must unplug the power cord from the wall outlet.
Grounding type wall receptacle
Power cord with
f
Do not, under
any circumstances, I cut, remove, I
or bypass the I
_. grounding prong, j)
for free repair.
LiMiTED FiVE YEAR WARRANTY ON SEALED REFRiGERATiON SYSTEM
For five years from the date of purchase, when this
appliance is installed,operated, and maintained according to the instructions supplied with it, Sears will repair the
sealed system (consisting of refrigerant, connecting tubing, and compressor), free of charge, if defective in material or workmanship.
If this appliance is used for other than private family purposes,
this warranty applies for only 90 days from the date of pur- chase.
This warranty covers only defects in material and work-
manship. Sears will NOT pay for:
1. Expendable items that can wear out from normal use, including but not limited to filters, belts, light bulbs and bags.
2. A service technician to instruct the user in correct product installation, operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not installed, operated or maintained according to all instructions supplied with the product.
5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.
6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than
those recommended in all instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.
Disclaimer of impliedwarranties; limitation of remedies
Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided
herein. Implied warranties, including warranties of merchant- ability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law. Sears shall not be liable for incidental or consequential damages. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitations on the duration of
implied warranties of merchantability or fitness, so these exclusions or limitations may not apply to you.
This warranty applies only while this appliance is used in the
United States and Canada.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
Sears Canada inc.,Toronto, Ontario, Canada MSB 2B8
In the U.S.A. In Canada
Master Protection Agreements
Congratulations on making a smart purchase. Your new
Kenmore Pro®product is designed and manufactured for
years of dependable operation. But like all products, it may
require preventive maintenance or repair from time to time.
That's when having a Master Protection Agreement can save you money and aggravation.
Purchase a Master Protection Agreement now and protect
yourself from unexpected hassle and expense.
The Master Protection Agreement also helps extend the life of your new appliance. Here's what's included in the
Agreement:
_" Expert service by our 12,000 professional repair
specialists
_" Unlimited service and no charge for parts and labor
on all covered repairs
_" "No-lemon" guarantee - replacement of your covered
product if four or more product failures occur within
twelve months
_" Product replacement if your covered product can't be
fixed
_" Annual Preventive Maintenance Check at your
request - no extra charge
_" Fast help by phone - phone support from a Sears
technician on products requiring in-home repair, plus convenient repair scheduling
_" Power surge protection against electrical damage due
to power fluctuations
_" Rental reimbursement if repair of your covered product
takes longer than promised
Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime
day or night, or schedule a service appointment online. Sears has over 12,000 professional repair specialists, who
have access to over 4.5 million quality parts and
That's the kind of professionalism you can
count on to help prolong the life of your new purchase for years to come. Purchase your Master Protection Agreement today!
Some limitations and exclusions apply. For prices and additional information, call 1-800-827-6655.
Sears Installation Service
For Sears professional installation of home appliances and
items like garage door openers, water heaters, and other major home items, in the U.S.A. call 1-800-4MY-HOME ®.
Maintenance Agreements
Your purchase has added value because you can depend on Sears HomeCentral ®for service. With over 2400 Service
Technicians and more than a million parts and accessories, we have the tools, parts, knowledge and skills to back our
pledge:
We Service What We Sell.
Your Kenmore Pro®product is designed, manufactured and tested to provide years of dependable operation. But like all
products, it may require service from time to time. The Sears Maintenance Agreement offers you an outstanding service
program, affordably priced.
The Sears Maintenance Agreement
Isyour way to buy tomorrow's service at today's price.
Eliminates repair bills resulting from normal wear and tear.
Provides phone support from a Sears technician on products requiring in-home repair.
Even if you don't need repairs, provides an annual
Preventive Maintenance Check, at your request, to
ensure that your product is in proper running condition.
Some limitations apply. For more information about concerning Sears Canada Maintenance Agreements, call
1-800-361-6665.
This Owner's Guide provides specific operating
instructions for your model. Use the refrigerator only as instructed in this Use & Care Manual. Before starting the refrigerator, follow these important first steps.
LOCATION
Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug.
If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat sources.
The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator.
Consider water supply availability for models equipped
with an automatic ice maker.
INSTALLATION
Installation Clearances
Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical
connections:
Sides &Top 3/8" Back 1"
DOOR OPENING
TOE GRILLE iNSTALLATION / REMOVAL
Open both doors and remove the toe grille by unscrewing its two mounting screws and gently pulling forward (see illustration).
Replace the toe grille by fitting it into place and refastening its mounting screws.
S
LEVELING
All four corners of your refrigerator must rest firmly on a solid floor. Your refrigerator is equipped with adjustable front rollers to help level your unit. To ensure proper door seal and assist door closing, the refrigerator should be tilted 1/4" (6 mm), front to back.
To Level Your Refrigerator:
1. Remove toe grille.
2. Use flat-blade screwdriver or 3/8" socket wrench to adjust front rollers.
Your refrigerator should be positioned to allow easy access to a counter when removing food. For best use of drawers and freezer baskets, the refrigerator should be in a position where both the refrigerator and freezer doors can be fully opened.
3. Check both doors to be sure seals touch cabinet on all four sides.
installation - Connecting ice Maker To Water Supply
To avoid electric shock, which can cause death or severe personal injury,disconnect the refrigerator
from electricaJ power before connecting a water supply line to the refrigerator.
To Avoid Property Damage:
- Copper tubing is recommended for the water supply line.Water supply tubing made of W' plastic is not recommended since it greatly increases the potential for water leaks. Manufacturer will not be responsible for any damage if plastic tubing is used for supply line.
- DO NOT install water supply tubing in areas where temperatures fall below freezing.
- Chemicals from a malfunctioning softener can damage the ice maker, if the ice maker is connected to soft water, ensure that the softener is maintained and working properly.
IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.
Before Instalfing The Water Supply Line, You Will Need
BasicTools: adjustable wrench, flat-blade screwdriver, and Phillips TM screwdriver
Access to a household cold water line with water pressure between 30 and 100 psi. A water supply line made of 1Ainch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed,
you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown). A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type
shutoff valve. A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.
NOTE: A water line kit is available from your appliance dealei at additional cost. It contains 25 feet (7:6 meters) of 1A inch OD copper tubing, a saddle type shutoff valve (nonpiercing), (2) Y4inch brass compression nuts, (2) ferrules!
1
sleeves, and instructions for installing a water supply line.
To Connect Water Supply Line To Ice Maker Inlet Valve
P!astic water Tubing
1. Disconnect refrigerator from electric power source.
2. Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shut
Compression
off valve.
3. Unscrew plastic cap from water valve inlet and discard cap.
4. Slide brass compression nut, then ferrule (sleeve) onto water supply line,
(Sleeve)
as shown.
5. Push water supply line into water valve inlet as far as it will go (1Ainch). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut
water line
Water Valve
onto valve. Tighten another half turn with a wrench; DO NOT over tighten.
6. With steel clamp and screw, secure water supply line to rear panel of refrigerator as shown.
7. Coil excess water supply line (about 21/2turns) behind refrigerator as shown and arrange coils so they do not vibrate or wear against any other surface.
8. Turn ON water supply at shutoff valve and tighten any connections that leak.
_upply
9. Reconnect refrigerator to electrical power sou rce. (Includeenoughtubinginlooptoallow
10. To turn ice maker on, lower wire signal arm (see ice maker front cover for movingreft!geratoroutforcleaning.) ON/OFF position of arm).
Brass
Lit
Inlet
IMPORTANT: It takes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may cause ice maker to cyc!e tW° or three times before making afull tray 0f ice. New plumbing may cause ice tobe discolored or have poor flavor. Discard ice made during the first 24 hoursl
Tools Necessary:
3/8" Fixed
Wrench
Phillips head
Before you start:
1 Make sure the electrical power cord is unplugged from the wall outlet. 2 Remove any food from the door shelves.
3 Close the doors.
To remove the hinge cover:
1 Remove the three screws from the cover over the top door hinges. 2 Pull the cover forward about a half inch and lift it off.
To remove the refrigerator door:
1 Trace lightly around the door's top hinge with a pencil. This makes reinstallation easier.
2 Remove the two screws from the top hinge. Lift the door off of the bottom hinge and set it
aside
3 Remove the three bottom hinge screws and hinge, if necessary.
To remove the freezer door:
1 Detach the multi-wire cable connector located above the top hinge. Grasp both sides of
the connector firmly and pull apart.
2 Trace lightly around the door's top hinge with a pencil. This makes reinstallation easier. 3 Detach the water tube from the connector located below the
freezer door. The connector releases when you press its outer sleeve inward.
4 Remove the screws from the top hinge and pull the multi-
wire cable through it.
5 Lift the door off of the bottom hinge. Lay the door on its side
to avoid damage to the Remove the three bottom hinge screws and hinge, f necessary.
To reinstall the refrigerator and freezer doors, reverse the
above steps.
Strews J
Ice
Small
Fixed
Door Bin
Fixed
Door Bin
Tilt Out
Door Bin
Large
Glide
Basket
Features At A Glance
Freezer and Refrigerator SpiliProofTM CAUTION:
Controls ght Fit Do Not Remove
ice Cream Aspect Shelf net Behind
ice Mak_ Water Filter Compartment
iiiii_ i
Dairy
Compartment
SpiBProof TM
Shelf
Temperature
Controlled
with Wine Rack
_rBin
)iBProof TM
Sliding Shelf
Tik
Door Bin
Large
Glide Out
Bin
Tilt
Door Bin
;r Pan
and Cover
Door Bin
Toe GriBe
Features may vary according to model
ALLOWING COOLING TIME BEFORE USE Toensure reliable food storage, allow you r refrigerator and freezer to operate with the doors closed for 8 to 12 hours before
placing food inside. During this cooling period, you do not need to adjust the controls, which are preset at the factory. SETTING COOLING TEMPERATURES
Your refrigerator comes with a state-of-the-art electronic digital control system. The system's control panel is located at the top of the the fresh food compartment.
The two digital displays on the left half of the control panel indicate the current settings or temperatures of your freezer and fresh food compartments. The 2 gauges located on the front of the refrigerator just above the Ice and Water Dispenser also
give you the current temperatures for the freezer and fresh food compartments. Toadjust the temperatu re to a higher or lower setting, press the Up (Cold) or Down (Colder) button closest to the display.
The first time you press the button, the display shows current setting you entered. Each press of the button after that changes the setting by one.
The display shows your new setting momentarily, then changes back to the current temperature.
%.
Colder Mode Colder PowerFaihre _ @ ChangeF[Iter
(TemperatureDisplay : Features mayvary.)
Q
Freezer Gauge Refrigerator Gauge
(Gauges will operate in Fahrenheit only)
Refrigerator Alarm Filter
Cold Air
On @
DoerAjar _ ...... _ FiJterOl(
N/ mgha.n_ @ Reset gl_f :: G Ord_Fl_
CHOOSING FAHRENHEIT OR CENTIGRADE
Depending on which temperature standard you prefer to use, you can set your control panel to display in fahrenheit or. centigrade. To change between fahrenheit and centigrade, press the Mode button (located between the two digital temperature displays).
Cold
Colder Mode Colder
Freezer
Refrigerator .........
1
]
Press to alternate between Fahrenheitand Centigrade
Cdd
Loading...
+ 18 hidden pages