Kenmore Elite 79551823412 Owner’s Manual
Use & Care Guide
Manual de Uso y Cuidado
Models/Modelos: 795.5182*
Side-by-Side Refrigerator
Refrigerador de Dos Puertas
* = color number, número de color
P/N MFL63729605-4
Sears Brands Management Corporation
Hoff man Estates, IL 60179 U.S.A.
www.kenmore.com
TABLE OF CONTENTS
Warranty............................................................................. 3
Product Record
Important Safety Instructions
Electrical & Grounding Requirements
Parts and Features
.............................................................. 4
................................ 5
.............. 7
....................................................... 8
Refrigerator Installation .............................. 9-14
Unpacking Your Refrigerator ..........................9
Installation
.................................................................... 10
Removing/Replacing Your Refrigerator and
Freezer Handles and Doors
........................... 11-13
Leveling and Door Alignment ......................14
Using Your Refrigerator ..................................15
Setting the Controls ....................................... 15
Control Panel Features
............................................15
Automatic Icemaker ......................................17
Food Storage Guide .....................................19
Refrigerator Section
Water and Ice Dispenser ............................. 20
Door Bin and Support .................................. 20
Freezer Section
Ice Storage Bin .............................................. 22
Water Filter ..................................................... 23
Care And Cleaning ......................................... 27
General Cleaning Tips ................................ 27
Outside ........................................................... 27
Inside Walls ................................................... 27
Door Liner And Gaskets ............................... 27
Plastic Parts .................................................... 27
Condenser Coils ............................................. 27
LED Light Replacement ................................ 28
Power Interruptions ....................................... 28
When You Go On Vacation ........................ 28
When You Move ............................................ 28
Connecting the Water Line ............................ 29
Troubleshooting Guide ................................... 32
Diagnostics ........................................................ 40
Service....................................... Back Cover
Snack Pan ....................................................... 20
Crisper Drawer and Cover ............................ 21
Refrigerator/Freezer Shelves
..............................21
2
WARRANTY
REFRIGERATOR WARRANTY
®
KENMORE ELITE LIMITED WARRANTY
WITH PROOF OF SALE, the following warranty coverage applies when this appliance is correctly installed, operated and maintained
according to all supplied instructions.
One Year on Appliance
FOR ONE YEAR from the date of sale this appliance is warranted against defects in material or workmanship. A defective appliance
will receive free repair or replacement at option of seller. This warranty coverage applies for only 90 days from the sale date if the
appliance is ever used for other than private household purposes.
Five Years on Sealed Refrigerant System
FOR FIVE YEARS from the date of sale, the sealed refrigerant system of this appliance is warranted against defects in material or
workmanship. If a system part is defective within the first year, a new part will be supplied and installed at no charge. If a system part
is defective after the first year, a new part will be supplied but not installed at no charge. You are responsible for the labor cost of part
installation after the first year from the date of sale. This warranty coverage applies for only one year from the sale date if the
appliance is ever used for other than private household purposes.
Ten Years on Linear Compressor
FOR TEN YEARS from the date of sale, the linear compressor of this appliance is warranted against defects in material or workmanship.
If the compressor is defective within the first year, a new one will be supplied and installed at no charge. If the compressor is defective
after the first year, a new one will be supplied but not installed at no charge. You are responsible for the labor cost of part installation
after the first year from the date of sale. This warranty coverage applies for only two years from the sale date if the appliance is ever
used for other than private household purposes.
Lifetime on Storage Bins
FOR AS LONG AS IT IS USED from the date of sale, a free replacement will be supplied for a defective refrigerator or freezer
compartment storage bin. If the defect appears within the first year, a new bin will be installed at no charge. If the defect appears after
the first year, a new bin will be supplied but not installed at no charge. This Lifetime warranty covers only storage bins, and does not
apply to any other related component or mechanism. You are responsible for the labor cost of bin installation after the first year from
the date of sale. This warranty coverage applies for only 90 days from the date of sale if the appliance is ever used for other than
private household purposes.
For warranty coverage details to obtain free repair or replacement, visit the web page: www.kenmore.com/warranty
This warranty covers ONLY defects in material and workmanship, and will NOT pay for:
1. Expendable items that can wear out from normal use, including but not limited to filters, belts, bags or screw-in base light bulbs.
2. A service technician to clean or maintain this appliance, or to instruct the user in correct appliance installation, operation and
maintenance.
3. Service calls to correct appliance installation not performed by Sears authorized service agents, or to repair problems with house
fuses, circuit breakers, house wiring, and plumbing or gas supply systems resulting from such installation.
4. Damage to or failure of this appliance resulting from installation not performed by Sears authorized service agents, including
installation that was not in accord with electrical, gas or plumbing codes.
5. Damage to or failure of this appliance, including discoloration or surface rust, if it is not correctly operated and maintained
according to all supplied instructions.
6. Damage to or failure of this appliance, including discoloration or surface rust, resulting from accident, alteration, abuse, misuse or
use for other than its intended purpose.
7. Damage to or failure of this appliance, including discoloration or surface rust, caused by the use of detergents, cleaners, chemicals
or utensils other than those recommended in all instructions supplied with the product.
8. Damage to or failure of parts or systems resulting from unauthorized modifications made to this appliance.
9. Service to an appliance if the model and serial plate is missing, altered, or cannot easily be determined to have the appropriate
certification logo.
Disclaimer of implied warranties; limitation of remedies
Customer’s sole and exclusive remedy under this limited warranty shall be product repair or replacement as provided herein. Implied
warranties, including warranties of merchantability or fitness for a particular purpose, are limited to one year on the appliance, five
years on the sealed refrigerant system, ten years on the linear compressor, and for as long as used on the storage bins, or the shortest
period allowed by law. Seller shall not be liable for incidental or consequential damages. Some states do not allow the exclusion or
limitation of incidental or consequential damages, or limitation on the duration of implied warranties of merchantability or fitness, so
these exclusions or limitations may not apply to you.
This warranty applies only while this appliance is used in the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
3
PRODUCT RECORD
In the space below, record the date of purchase, model and serial number of your product. You will find the model and
serial number printed on an identifi cation label located on the interior liner of the refrigerator compartment. Have these
items of information available whenever you contact Sears concerning your product.
Model No.___________________ Date of Purchase ___________________
Serial No.___________________
Save these instructions and attach your sales receipt for future reference.
4
IMPORTANT SAFETY INSTRUCTIONS
BASIC SAFETY PRECAUTIONS
This guide contains many important safety messages. Always read and obey all safety messages.
This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill
or hurt you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard
signal word DANGER, WARNING or CAUTION. These words mean:
DANGER
You will be killed or seriously injured if you do not follow instructions.
You can be killed or seriously injured if you do not follow instructions.
WARNING
Indicates an imminently hazardous situation which, if not avoided,
CAUTION
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen
if the instructions are not followed.
To reduce the risk of fi re, electric shock, or personal
injury when using your product, basic safety precautions
should be followed, including the following.
Read all instructions before using this appliance.
• NEVER unplug your refrigerator by pulling on the
power cord. Always grip the plug fi rmly and pull it
straight out from the outlet.
• Immediately repair or replace all power cords that
have become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage
along its length or at either the plug or connector end.
• Do not modify or extend the power cord length. It
could cause electric shock or fi re.
• When moving your refrigerator away from the wall, be
careful not to roll over or damage the power cord.
• The insulation in this unit contains cyclopentane or a
pentane-like gas which is fl ammable and requires a
special elimination process. Before discontinuing use of
this refrigerator, contact local authorities to arrange for
safe disposal of the unit.
may result in minor or moderate injury, or product damage.
WARNING
• DO NOT store or use gasoline or other fl ammable
vapors and liquids in the vicinity of this or any other
appliance.
• DO NOT store explosive substances such as aerosol
cans containing fl ammable propellants in this
appliance.
• DO NOT allow children to climb, stand, or hang on the
refrigerator doors or shelves in the refrigerator. They
could damage the refrigerator and seriously injure
themselves.
• Keep fi ngers out of pinch point areas; clearances
between the doors and cabinets are necessarily small.
Be careful closing doors when children are in the area.
• Unplug your refrigerator before cleaning or making
any repairs.
NOTE: It is strongly recommended that any service be
performed by a qualifi ed technician.
SAVE THESE INSTRUCTIONS
5
WARNING
• Before service is performed on the interior LED lighting,
unplug the refrigerator or turn off power at the circuit
breaker or fuse box.
NOTE: The refrigerator and freezer compartment
lights are LED interior lighting, and service should be
performed by a qualified technician.
WARNING: Setting either or both controls to the OFF
position does not remove power to the light circuit.
• When you are finished, reconnect the refrigerator to
the electrical source and reset the controls (Thermostat,
Refrigerator Control, and or Freezer Control, depending
on the model) to the desired setting.
• This refrigerator must be properly installed in
accordance with the Attention Installer Instructions that
were taped to the front of the refrigerator.
• After your refrigerator is in operation, do not touch the
cold surfaces in the freezer compartment when hands
are damp or wet. Skin may adhere to the extremely cold
surfaces.
• DO NOT touch the automatic ice making mechanism
while the refrigerator is plugged in.
• DO NOT refreeze frozen foods which have thawed
completely. The United States Department of
Agriculture in Home and Garden Bulletin No. 69 says:
…You may safely refreeze frozen foods that have
thawed if they still contain ice crystals or if they are
still cold—below 4°C.
…Thawed ground meats, poultry or
off -odor or off -color should not be refrozen and should
not be eaten. Thawed ice cream should be discarded.
If the odor or color of any food is poor or questionable,
dispose of it. The food may be dangerous to eat.
Even partial thawing and refreezing reduces the
eating quality of foods, particularly fruits, vegetables
and prepared foods. The eating quality of red meats
is aff ected less than that of many other foods. Use
refrozen foods as soon as possible to save as much of
their quality as you can.
sh that have any
SAVE THESE INSTRUCTIONS
CAUTION
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
DANGER: RISK OF CHILD ENTRAPMENT
Junked or abandoned refrigerators are dangerous, even
if they are sitting for only a few days. If you are getting
rid of your old refrigerator, please follow the instructions
at right to help prevent accidents (child entrapment and
suff ocation).
Children should be supervised to ensure that they do not
play with the appliance.
BEFORE YOU THROW AWAY
YOUR OLD REFRIGERATOR
OR FREEZER:
• Take off the doors.
• Leave the shelves in place so that
children may not easily climb inside
.
6
CFC/HCFC DISPOSAL
Your old refrigerator may have a cooling system
that used CFCs or HCFCs (chlorofl uorocarbons or
hydrochlorofl uorocarbons). CFCs and HCFCs are
believed to harm stratospheric ozone if released to the
atmosphere. Other refrigerants may also cause harm to
the environment if released to the atmosphere.
ELECTRICAL & GROUNDING REQUIREMENTS
IMPORTANT: Please read carefully.
TO CONNECT ELECTRICITY
WARNING
Electrical Shock Hazard
FOR PERSONAL SAFETY, this appliance must be
properly grounded. Have the wall outlet and the circuit
checked by a qualifi ed electrician to make sure the
outlet is properly grounded.
If you are throwing away your old refrigerator, make
sure the refrigerant is removed for proper disposal
by a qualifi ed technician. If you intentionally release
refrigerant, you may be subject to fi nes and imprisonment
under provisions of environmental legislation.
USE OF EXTENSION CORDS
WARNING: Do not use extension cords or ungrounded
(two-prong) adaptors. Because of potential safety
hazards under certain conditions, the use of an extension
cord is not recommended. However, if you still elect to
use an extension cord, it is absolutely necessary that it
be a UL-listed (USA), 3-wire grounding type appliance
extension cord having a grounding type plug and outlet,
and that the electrical rating of the cord be 15 amperes
(minimum) and 120 volts.
Use of an extension cord will increase the clearance
needed for the back of the refrigerator.
3-prong
grounding type
wall receptacle
3-prong
grounding
plug
Ensure proper
ground exists
before use.
RECOMMENDED GROUNDING METHOD
The refrigerator should always be plugged into its own
individual properly grounded electrical outlet rated for 115
Volts, 60 Hz, AC only, and fused at 15 amperes (minimum).
This provides the best performance and also prevents
overloading house wiring circuits which could cause a fi re
hazard from overheated wires. It is recommended that a
separate circuit serving only this appliance be provided.
Use a receptacle that cannot be turned off with a switch
or pull chain. Do not use an extension cord.
Where a standard two-prong wall outlet is encountered,
it is your personal responsibility and obligation to have
it replaced with a properly grounded three-prong wall
outlet.
CAUTION
• Do not bend the power cord excessively or place heavy
articles on it.
• Connect the power plug in the proper position with the
cord hanging down.
• When moving the refrigerator, be careful not to roll
over or damage the power cord.
• If the power cord is damaged, have it replaced
immediately by the manufacturer or its service agent.
• Do not insert the power plug with wet hands.
• Do not insert your hands into the area under the
bottom of the appliance.
• Make sure that the power plug is not squashed or
damaged by the back of the refrigerator.
WARNING
Replacing Electrical Cord
To avoid hazard, damaged power cords must be
replaced by the manufacturer or its service agent or
a similarly qualifi ed technician. Do not operate the
appliance with a damaged power cord.
7
PARTS AND FEATURES
O
N
Use this page to become more familiar with the parts and features of your refrigerator.
NOTE: This guide covers several diff erent models. The refrigerator you have purchased may have some or all of the items
listed below. The locations of the features shown below may not match your model.
A
Automatic Icemaker
B
Freezer Shelves
C
Freezer Light (LED)
D
Freezer Door Bins
E
Pullout Drawer
F
Base Grille
G
Refrigerator Light (LED)
H
Dairy Bin
I
Can Rack
J
Water Filter
K
Refrigerator Shelf
L
Snack Pan
M
Adjustable Door Bins
N
Fixed Door Bin
O
Crisper Drawer
8
REFRIGERATOR INSTALLATION
WARNING WARNING
Excessive Weight Hazard:
Use two or more people to move and install the
refrigerator. Failure to do so can result in back or
other injury.
UNPACKING YOUR REFRIGERATOR
Remove tape and any temporary labels from your
refrigerator before using. Do not remove any warningtype labels, the model and serial number label, or
the Tech Sheet that is located under the front of the
refrigerator, behind the base grille. Please remove vinyl
from doors before connecting unit to the electrical
supply (on some models).
To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can also be
easily removed by rubbing a small amount of liquid dish
soap over the adhesive with your fingers. Wipe with warm
water and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator.
Excessive Weight Hazard:
Your refrigerator is heavy. When moving the
refrigerator for cleaning or service, be sure to protect
the floor. Always pull the refrigerator straight out when
moving it. Do not wiggle or walk the refrigerator when
trying to move it, as floor damage could occur.
WARNING
Explosion Hazard:
Keep flammable materials and vapors, such as
gasoline, away from the refrigerator. Failure to do so
can result in fire, explosion, or death.
Refrigerator shelves are installed in the shipping position.
Shelves may need to be appropriately located after the
unit has been unpacked.
NOTE:
This appliance is intended to be used in household and
similar applications such as:
• staff kitchen areas in shops, offi ces and other working
environments
• farm houses and by clients in hotels, motels and other
residential environments
• bed and breakfast environments
• catering and similar non-retail applications.
This product is not to be used for special purposes such
as the storage of medicine or test materials, or for use
on ships, etc.
9
REFRIGERATOR INSTALLATION
WARNING
Be careful when you work with the hinge, base grille,
stopper, etc. You may be injured.
To avoid risk of injury or electrical shock, do not put
hands or metal objects into the air vents, base grille, or
bottom opening of the refrigerator.
BASE GRILLE INSTALLATION
To remove the base grille:
1) Open the doors (refrigerator and freezer).
2) Once the doors are open, remove the two screws
from the base grille. Remove the base grille and set
safely aside.
3) Reattach screws to the base of refrigerator.
To replace the base grille:
1) Remove the two screws from the bottom front part
of refrigerator.
2) Place base grille into position and insert and
tighten screws.
INSTALLATION (continued)
1. To avoid noise and vibration, the unit must be
leveled and installed on a solidly constructed floor. If
required, adjust the leveling legs to compensate for
unevenness of the floor. The front should be slightly
higher than the rear to aid in door closing. Leveling
legs can be turned easily by tipping the cabinet
slightly. Turn the leveling legs counterclockwise to raise
the unit or clockwise to lower it. (See LEVELING AND
DOOR ALIGNMENT.)
NOTE: Installing on carpeting, soft tile surfaces,
a platform or weakly supported structure is not
recommended.
2. Install this appliance in an area where the temperature
is between 55°F (13°C) and 110°F (43°C). If the
temperature around the appliance is too low or high,
cooling ability may be adversely aff ected.
3. Select a place where a water supply can be easily
connected for the automatic icemaker.
NOTE: The water pressure must be between 20 and
120 psi on models without a water filter and between
40 and 120 psi on models with a water filter.
INSTALLATION
The refrigerator should always be plugged into its own
individual properly grounded electrical outlet rated for 115
Volts, 60 Hz, AC only, and fused at 15 amperes (minimum).
This provides the best performance and also prevents
overloading house wiring circuits which could cause a fire
hazard from overheated wires. It is recommended that a
separate circuit serving only this appliance be provided.
WARNING
Shock Hazard:
To reduce the risk of electric shock, do not install the
refrigerator in a wet or damp area.
4. Too small of a distance from adjacent items may
result in lowered freezing capability and increased
electricity consumption charges. Allow at least 24
inches (61 cm) in front of the refrigerator to open the
doors.
2” (5.08 cm)
2” (5.08 cm)
2” (5.08 cm)
2” (5.08 cm)
10
REFRIGERATOR INSTALLATION
NOTE: Removing the doors is the recommended procedure when it is necessary to move the refrigerator through a
narrow opening. If it is necessary to remove the handles, follow the directions below.
HOW TO REMOVE REFRIGERATOR
DOOR HANDLE
NOTE: Handle appearance may vary from the
illustrations on this page.
Mounting
fasteners
Removing Refrigerator Handle
Loosen the set screws with a 3/32 in. (2.5 mm)
Allen wrench and remove the handle.
NOTE: If the handle mounting fasteners need
to be tightened or removed, use a ¼ in. (6.4
mm) Allen wrench.
Set screw
Allen wrench
HOW TO REPLACE REFRIGERATOR
DOOR HANDLE
NOTE: Handle appearance may vary from the
illustrations on this page.
Replacing Refrigerator Door Handle
Place the handle on the door by fi tting
the handle footprints over the mounting
fasteners and tightening the set screws
with a 3/32 in (2.5 cm) Allen wrench.
NOTE: If the handle mounting fasteners
need to be tightened or removed, use a
¼ in. (6.4 mm) Allen wrench.
Mounting
Fasteners
11
REFRIGERATOR INSTALLATION
REMOVING AND REPLACING
REFRIGERATOR DOORS
WARNING
Excessive Weight Hazard:
Use two or more people to remove and install the
refrigerator doors. Failure to do so can result in back or
other injury.
WARNING
Electrical Shock Hazard
• Disconnect the electrical supply to the refrigerator
before installing. Failure to do so could result in
serious injury or death.
• Do not put hands, feet or other objects into the air
vents, base grille, or bottom of the refrigerator. You
may be injured or receive an electrical shock.
Removing the left (freezer) door with water line
connection.
Pull up the water feed tube while pressing the collet down
(Figure 1) as shown in the fi gure below.
NOTE: If a tube end is deformed or abraded, trim the
part away. Disconnecting the tube under the door causes
about 0.13 gallons (0.5 liters) of water to fl ow out. Put a
large container at the end of the tube to prevent water
from draining onto the fl oor.
Figure 1
(2)
Before removing the doors, remove the base grille.
See BASE GRILLE INSTALLATION for reference.
To remove the right (refrigerator) door:
(1)
(2)
)
(3
(4)
Type 1
(5)
(4)
(5)
)
(3
Type 2
Rivet
1. Open the door. Remove the top hinge cover screw (1).
2. Use a fl at blade screwdriver to pry back the hooks
(not shown) of the hinge cover from the top of the
refrigerator cabinet (2). Lift up the cover.
3. Rotate the hinge lever (3) clockwise. Lift the top hinge
(4) free of the hinge lever latch (5).
NOTE: Regardless of the hinge lever type, the removal
process is the same.
4. Lift the door from the lower hinge pin.
5. Place the door, inside facing up, on a non-scratching
surface.
CAUTION: When lifting the hinge free of the latch,
be careful that the door does not fall forward.
(1)
(5)
(7)
(6)
Rivet
Type 2
(5)
(6)
(4)
(7)
(3)
Type 1
1. Open the door. Remove the top hinge cover screw (1).
2. Use a fl at blade screwdriver to pry back the hooks
(not shown) of the hinge cover from the top of the
refrigerator cabinet (2). Lift up the cover.
3. Disconnect all the wire harnesses (3).
4. Remove the grounding screw (4).
5. Rotate hinge lever (5) counterclockwise. Lift the top
hinge (6) free of the hinge lever latch (7).
NOTE: Regardless of hinge lever type, removal process
is the same.
CAUTION: When lifting the hinge free of the latch,
be careful that the door does not fall forward.
6. Lift the door from the lower hinge pin being careful
to pull the water lines through the lower hinge pin.
7. Place the door, inside facing up, on a non-scratching
surface.
12
REFRIGERATOR INSTALLATION
Reinstalling the right (refrigerator) door
(1)
(2 )
Type 1
(3)
(4)
(5)
(4 )
(5 )
)
(3
Type 2
Rivet
1. Place the door onto the lower hinge pin.
2. Fit top hinge (4) over hinge lever latch (5) into place.
Rotate lever (3) counterclockwise to secure hinge.
NOTE: Regardless of the hinge lever type, the
reinstallation process is the same.
3. Hook the tab on the switch side of the corner under
the edge of the wire opening in the cabinet top.
Position the cover (2) into place. Insert and tighten
the cover screw (1).
Reinstalling the right (refrigerator) door
5. Reconnect the water tubes by inserting the tubes into
the connectors.
Collet
Tube
Insert Line
(2 )
(1 )
(4)
(5)
(6)
(7)
Type 1
(3)
(7)
(5)
(6)
Rivet
Type 2
1. Feed the water tubes through the lower hinge pin and
place the door onto the lower hinge pin.
2. Fit top hinge (6) over hinge lever latch (7) and into
place. Rotate lever (5) clockwise to secure hinge.
NOTE: Regardless of hinge lever type, reinstallation
process is the same.
3. Install the grounding screw (4) and connect all the
wire harnesses (3).
4. Hook tab on door switch side of cover (2) under
edge of wire opening in cabinet top. Position cover
into place. Insert and tighten cover screw (1).
13
Loading...