Kenmore Elite 79046623503, 79046629500, 79046633601, 79046633603, 79046633602 Owner’s Manual
...
®
DUAL FUEL
GE
Slide-inmodels
ESTUFA FU
L UAL
Modelos deslizables
Models, modeios 790.4662#
= color number, n_mero de color
0 0_----------_0 0
Sears Roebuck and Co., Hoffrnan Estates, IL 60179 U.S.A.
www,sears,com
iii.........
P/N 318203850 Rev. B (0601)
Table of Contents
Slide-in RangeWarranty ............................................................ 2
iMPORTANTSAFETY iNSTRUCTiONS .................................. 3-5
Product Record .......................................................................... 5
Serial Plate Location .................................................................. 5
Conversion to Liquefied Petroleum Gas (or LP. Gas)............. 5
Protection Agreements ............................................................. 6
Range Features .......................................................................... 7
Before Setting Surface Controls .............................................. 8
Setting Surface Controls ...................................................... 9=10
Surface Cooking ..................................................................11-12
Before Setting Oven Controls ............................................ 12-13
Air Circulation in the Oven ...................................................... 13
Control Pad Features ............................................................... 14
Minimum and Maximum Control Pad Settings ....................... 14
Setting Oven Controls ......................................................... 15-31
Setting Warmer Drawer Controls ....................................... 32-33
Self-Cleaning ....................................................................... 34-36
Adjusting Oven Temperature .................................................. 36
General Care & Cleaning .................................................... 37-41
Before You Call .................................................................... 42-43
Sears Service ........................................................................... 44
Please carefully read and save these instructions
This Use & Care Manual contains general operating instructions for your appliance and feature informationfor several
models. Your product may not have all the described features. The graphics shown are representative. The graphics on your
appliance may not look exactly like those shown. Common sense and caution must be practiced when installing, operating
and maintaining any appliance.
Kenmore Elite Appliance Warranty
OneYear Limited Warranty
When installed,operated and maintained according to all instructions supplied with the product, ifthis appliance fails due to a
defect in material or workmanship within one year from the date of purchase, call 1=800=4=MY=HOME®to arrange for free repair.
ifthis appliance isused for other than private family purposes, this warranty applies for only 90days from the date of purchase.
This warranty covers only defects in material and workmanship. Sears will NOT pay for:
1. Expendable items that can wear out from normal use, including but not limited to filters, belts, light bulbs, and bags.
2. A service technician to instruct the user in correct product installation, operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not installed, operated or maintained according to all instructions supplied with
the product.
5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.
6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those
recommended in all instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.
FIVE=YEAR MMITED WARRANTY
For the second through the fifth year from the date of purchase, when installed and operated according to the Installation
instructionsand Use & Care Guide, Sears will supply the following range parts free of charge ifthey fail for the reasons
listed below. Customer must pay labor cost of installation.
= Cooktop glass if it fails due to thermal shock.
• Cooktop elements if they are defective.
What Sears will not cover:
• Failure of the product if it is abused, misused, or used for other than the intended purpose.
= Damage to the cooktop glass caused by the use of cleaners or utensils other than the recommended cleaning cream
and tools.
= Damage to the cooktop glass caused by hardened spills of sugary materials (including starches from vegetables or
pastas) or melted plastic that are not cleaned according to the directions in the Use & Care Guide.
• Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
Disclaimer of implied warranties; limitation of remedies
Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided herein. Implied
warranties, including warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest
period allowed by law. Sears shall not be liable for incidental or consequential damages. Some states and provinces do not
allow the exclusion or limitation of incidental or consequential damages, or limitations on the duration of implied warranties
of merchantability or fitness, so these exclusions or limitation may not apply to you.
This warranty applies only while this appliance is used in the United States and Canada.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
Sears Canada Inc.,Toronto, Ontario, Canada M5B 2B8
2
Printed in United States
important Safety instructions
Read all instructions before using this appliance.
Save these instructions for future reference.
This manual contains many important safety messages. Always read and obey all safety messages.
The safety symbol _ calls your attention to safety messages that inform you of hazards that can kill or hurt you or
others, or cause damage to the product.
indicates an imminently hazardous situation which, if not avoided may result in death or
serious injury.
Indicates an imminently hazardous situation which, if not avoided may result in minor or
moderate injury, or product damage.
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.
if the information in this manual is not followed
exactly, a fire or explosion may result causing property damage,
personal injury or death.
FOR YOUR SAFETY:
-- Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
-- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in
your building.
• Immediately call your gas supplier from a neighbor's phone.
Follow the gas supplier's instructions.
• if you cannot reach your gas supplier, call the fire department.
-- Installation and service must be performed by a qualified
installer, servicer or the gas supplier.
• Remove all tape and packaging before using the
range. Destroy the carton and plastic bags after
unpacking the range. Never allow children to play with
packaging material.
• Proper Installation-Be sure your appliance is properly
installed and grounded by a qualified technician in
accordance with the National Fuel Gas Code ANSI
Z223.1 latest edition, and National Electrical Code
ANSI/NFPA No. 70--latest edition, and local code
requirements, install only per installation instructions
provided in the literature package for this range.
Sears Parts & Repair is the recommended repair service
for this appliance. Know how to disconnect the power to
the range at the circuit breaker or fuse box and gas supply
at the main shutoff valve in case of an emergency.
Remove the drawer to access the valve.
• User servicing--Do not repair or replace any part of
the appliance unless specifically recommended in the
manuals. All other servicing should be done only by a
qualified technician, This may reduce the risk of personal
injuryand damage to the range.
• Never modify or alter the construction of a range by
removing leveling legs, panels, wire covers, anti-tip
brackets/screws, or any other part of the product.
Stepping, leaning or sitting on the door or
drawer of this range can result in serious injuries and also
cause damage to the range. Do not allow children to climb
or play around the range. The weight of a child on an open
door may cause the range to tip, resulting in serious burns or
other injury.An open drawer, when hot, may cause burns.
equipped) for storage.
in the cabinets above a range. Children climbing on the
range to reach items could be seriously injured.
to heat or warm the room. Doing so may result incarbon
monoxide poisoning and overheating of the oven.
• Storage in or on Appliance--Flammable materials should
not be stored in an oven, near surface burners or in the
drawer (if equipped). This includes paper, plastic and cloth
items, such as cookbooks, plasticware and towels, as well as
flammable liquids. Do not store explosives, such as aerosol
cans, on or near the appliance. Flammable materials may
explode and result infire or property damage.
• Do not leave children alone--Children should not be
left alone or unattended in the area where appliance is
in use. They should never be allowed to sit or stand on
any part of the appliance.
• DO NOTTOUCH SURFACE BURNERS, AREAS NEAR
THESE BURNERS, OVEN HEATING ELEMENTS OR
INTERIOR SURFACES OF THE OVEN OR WARMER
DRAWER (if equipped). Both surface burners and oven
heating elements may be hot even though they are dark in
color. Areas near surface burners may become hot
enough to cause burns. During and after use, do not
V_rsons could result.
_i Install anti-tip device packed
the range must be secured by properly
installed anti-tip bracket(s) provided with the
range. To check if the bracket(s) is installed
properly, remove the lower panel or storage
drawer and verify that the anti-tip bracket(s)
is engaged. Refer to the installation
instructions for proper anti-tip bracket(s)
installation.
Do not use the oven or warmer drawer (if
Do not store items of interest to children
NEVER use this appliance as aspace heater
All ranges can tip.
with range.
See Installation Instructions.
To reduce the risk of tipping,
important
Safety Instructions
touch, or let clothing or other flammable materials touch
these areas until they have had sufficient time to cool.
Among these areas are the cooktop, surfaces facing the
cooktop, the oven vent openings and surfaces near
these openings, oven door and window.
• Wear proper apparel--Loose=fitting or hanging
garments should never be worn while using the
appliance. Do not let clothing or other flammable
materials contact hot surfaces.
• Do not use water or flour on grease fires--Smother
the fire with a pan lid, or use baking soda, a dry
chemical or foam-type extinguisher.
• When heating fat or grease, watch it closely. Fat or
grease may catch fire ifallowed to become too hot.
in case of fire or gas leak, be sure to turn
off the main gas shutoff valve.
• Use only dry potholders--Moist or damp potholders
on hot surfaces may result in burns from steam. Do
not let potholders touch hot heating elements. Do not use
a towel or other bulky cloth instead of a potholder.
• Do not heat unopened food containers--BuiJdup of
pressure may cause container to burst and result in
injury.
• Remove the oven door from any unused range if it is
to be stored or discarded.
IMPORTANT--Do not attempt to operate the oven during
a power failure, if the power fails, always turn the oven
off. If the oven is not turns off and the power resumes, the
oven may begin to operate again. Food left unattended
could catch fire or spoil.
Use proper flame size--Adjust flame size
so it does not extend beyond the edge of the utensil.
The use of undersize utensils will exposed a portion of the
burner flame to direct contact and may result in ignition of
clothing. Proper relationship of utensil to flame will also
improve efficiency.
Do not use stove top grills on the burner
grates of sealed gas burners. If you use a stove top grill on
a sealed gas burner, it will cause incomplete combustion
and can result in exposure to carbon monoxide levels above
allowable current standards. This can be hazardous to your
health.
Electronic controllers can be damaged by
cold temperatures. When you use your appliance for the
first time, or if it has not been used for a long period of
time, make sure that it has been exposed to a
temperature above 0°C/32°F for at least 3 hours before
connecting itto the power supply.
IMPORTANT INSTRUCTIONS FOR USING
YOUR COOKTOP
• Know which knob controls each surface heating unit.
Always turn the knob to the LITE position when igniting
the burners. Visually check that burner has lit. Then
adjust the flame so it does not extend beyond the edge of
the utensil.
• Use proper pan size. This appliance is equipped with one
or more surface burners of different sizes. Select utensils
having flat bottoms large enough to cover the surface
burner. The use of undersized utensils will expose a portion
of the surface burner to direct contact and may result in
ignitionof clothing. Proper relationship of utensil to the
surface burner will also improveefficiency.
• Utensil handles should be turned inward and not
extend over adjacent surface burners--To reduce the risk
of burns, ignitionof flammable materials, and spillage due
to unintentional contact with the utensil. The handle of the
utensil should be positioned so that itis turned inward, and
does not extend over adjacent surface burners.
• Never leave surface burners unattended at high heat
settings--Boilovers cause smoking and greasy spillovers
that may ignite, or a pan that has boiled dry may melt.
• Protective liners--Do not use aluminum foil to line oven
bottom or any other part of the appliance. Only use
aluminum foil as recommended for baking ifused as a
cover placed on the food. Any other use of protective
liners or aluminum foil may result in a risk of electric
shock or fire or short circuit.
• Glazed cooking utensils--Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for rangetop service without breaking
due to the sudden change in temperature. Check the
manufacturer's recommendations for rangetop use.
= Do not use decorative surface burner covets. If a
burner isaccidentally turned on, the decorative cover will
become hot and possibly melt. Burns will occur if the hot
covers are touched. Damage may also be done to the
cooktop or burners because the covers may cause
overheating. Air will be blocked from the burner and
cause combustion problems.
FOR GLASS COOKTOPS ONLY
• Do not clean or operate a broken cooktop--lf cooktop
should break, cleaning solutions and spillovers may
penetrate the broken cooktop and create a risk of electric
shock. Contact a qualified technician immediately.
• Clean cooktop glass with caution--If awet sponge or
cloth is used to wipe spills on a hot cooking area, be
careful to avoid a steam burn. Some cleaners can produce
harmful fumes if applied to a hot surface.
• Avoid scratching the cooktop glass with sharp
objects.
IMPORTANT INSTRUCTIONS FOR USING
YOUR OVEN
• Use care when opening oven door or warmer drawer (if
equipped)--Stand to the side of the range when opening
the door of a hot oven. Let hot air or steam escape before
you remove or replace food in the oven/warmer drawer.
• Keep oven vent ducts unobstructed. The oven vent is
located at the rear of the cooktop. Touching the surfaces
in this area when the oven is operating may cause severe
burns. Also, do not place plastic or heat-sensitive items
on or near the oven vent. These items could melt or ignite.
important
Safety Instructions
• Placement of oven/warmer drawer (if equipped) racks.
Always place oven racks indesired location while oven/
warmer drawer (if equipped) is cool. If rack must be
moved while oven is hot use extreme caution. Use
potholders and grasp the rack with both hands to
reposition. Do not let potholders contact the hot heating
elements in the oven/warmer drawer (if equipped).
Remove all utensils from the rack before moving.
= Do not use the broiler pan without its insert. The
broiler pan and itsinsert allow dripping fat to drain and be
kept away from the high heat of the broiler.
• Do not cover the broiler insert with aluminum foil.
Exposed fat and grease could ignite.
• Do not touch a hot light bulb with a damp cloth. Doing
so could cause the bulb to break. Disconnect the
appliance or turn off the power to the appliance before
removing and replacing light bulb.
IMPORTANT INSTRUCTIONS FOR CLEANING
YOUR RANGE
• Clean the range regularly to keep all parts free of
grease that could catch fire. Exhaust fan ventilation
hoods and grease filters should be kept clean. Do not
allow grease to accumulate on hood or filter. Greasy
deposits in the fan could catch fire. When you are flaming
food under the hood, turn the fan on. Refer to the hood
manufacturer's instructionsfor cleaning.
SELF CLEANING OVENS
• in the self-Cleaning cycle only clean the parts listed in
this Use and Care Guide. Before self cleaning the oven,
remove the broiler pan and any utensils or foods from the
oven.
• Do not use oven cleaners--No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
Do not clean door gasket--The door gasket is essential
fora good seal. Care should be taken not to rub, damage
or move the gasket.
Remove oven racks. Oven racks color will change if left
in the oven during a self-cleaning cycle.
®
sensitive to the fumes given off during the self-
cleaning cycle of the range. Move the birds to another
well ventilated room.
The health of some birds is extremely
Important Safety Notice
The California Safe Drinking Water and Toxic Enforcement
Act requires the Governor of California to publish a list of
substances known to the state to cause cancer, birth
defects or other reproductive harm, and requires
businesses to warn customers of potential exposure to
such substances.
Product Record
in this space below, record the date of purchase, model and serial
number of your product. You will find the model and serial number
printed on the serial plate.
Model No. 790.
Serial No.
Date of purchase
Save these instructions and your sales receipt for future reference.
Serial Plate Location
You will find the model and
serial number printed on the
serial plate. The serial plate
is located as shown below.
Remember to record the
serial numberforfuture
reference. Serial Plate:
Conversion to Liquefied Petroleum Gas (or L.P. Gas)
This natural gas range is designed to allow for conversion
to Liquefied Petroleum (L.P.) Gas.
Only a qualified service agent should perform the L.P.
conversion. Call 1-800-4-MY-HOME® ifyou wish to have
Sears Service perform the conversion. An L.P. Conversion
Kit is provided with this range and is located on the right
panel (right side) of the range. The kit contains installation
instructionswhich must be read before and followed
carefully when installing the kit.
changes or conversions required in order for this appliance
to satisfactorily meet the application needs must be made
by a qualified service agent.
To avoid serious injury, any additions,
Location
PROTECTION AGREEMENTS
in the U.S.A.
Master Protection Agreements
Congratulations on making a smart purchase. Your new
Kenmore ®product is designed and manufactured for years
of dependable operation. But like all products, it may
require preventive maintenance or repair from time to time.
That's when having a Master Protection Agreement can
save you money and aggravation.
Purchase a Master Protection Agreement now and protect
yourself from unexpected hassle and expense.
The Master Protection Agreement also helps extend the life
of your new product. Here's what's included in the
Agreement:
[Y_ Expert service by our 12,000 professional repair
specialists
lY_ Unlimited service and no charge for parts and labor on
all covered repairs
5_ "No=lemon"guarantee- replacement
of your covered product if four or more product failures
occur within twelve months
5_ Product replacement if your covered product can't be
fixed
Annual Preventive Maintenance Check at your
request- no extra charge
Fast help by phone - phone support from a Sears
technician on products requiring in-home repair, plus
convenient repair scheduling
5_ Power surge protection against electrical damage
due to power fluctuations
5_ Rental reimbursement if repair of your covered
product takes longer than promised
in Canada
Maintenance Agreements
Your purchase has added value because you can
depend on Sears HomeCentral®for service. With over
2400 Service Technicians and more than a million parts
and accessories, we have the tools, parts, knowledge
and skills to ensure our pledge: We Service What We
Sell.
Your Kenmore ®product is designed, manufactured
and tested to provide years of dependable operation. But
like all products, it may require service from time to time.
The Sears Maintenance Agreement offers you an
outstanding service program, affordably priced.
The Sears Maintenance Agreement:
Is your way to buy tomorrow's service at today's price
Eliminates repair bills resulting from normal wear and
tear
Provides phone support from a Sears technician on
products requiring in-home repair
Even if you don't need repairs, provides an annual
Preventive Maintenance Check, at your request, to
ensure that your product is in proper running condition.
Some limitations apply. For more information about
Sears Canada Maintenance Agreements,
call 1=800=361=6665
Once you purchase the Agreement, a simple phone call is
all that it takes for you to schedule service. You can call
anytime day or night, or schedule a service appointment
on-line.
Sears has over 12,000 professional repair specialists, who
have access to over 4.5 million quality parts and
accessories. That's the kind of professionalism you can
count on to help prolong the life of your new purchase for
years to come. Purchase your Master Protection
Agreement today!
Some limitations and exclusions apply.
For prices and additional information call
1-800-827-6655.
Sears Installation Service
For Sears professional installation of home
appliances, garage door openers, water heaters,
and other major home items, in the U.S.A. call
1-800-4-MY-HOME®
Range Features
Your
Dual Fuel
Slide=In
Range
Features
At a Glance
Left Front Burner
Valve & Knob
Bridge Burner
Valve
Electronic Oven Controls with
Clock and Kitchen Timer
Electronic Warmer
Drawer Control
Dishwasher Safe
Burner Grates
Right Front
Burner Valve &
Knob
Right Rear
Burner Valve
& Knob
Seari g Grill
Broil Pan Insert
Broil Pan
Convection
Rack Griddle
Convection
Fan Cover
One Piece
Door
Dishwasher Safe
Burner Grates
Oven Vent
Broil Element
Self-Cleaning
Oven
Ajustable
Racks
Interior
Halogen
Oven Ligths
Glass Oven
Door with is......
ge Window
Opening
Drawe r
with Rack
Dishwasher Safe
Center Burner Grate
*9,000 BTU
Burner
*9,000 BTU
Burner
* 27,000 BTU when used with all 3
burners combined as a Bridge Burner.
Note: The features of your range will
vary according to model.
*9,000 BTU Burner
7
5,OOOBTU
Burner
17,200 BTU
Burner
Glass Cooktop
Before Setting Surface Controls
Assembly of the Surface Burner Heads, Burner Caps and Burner Grates
It is very important to make sure that all of the Surface Burner Heads, Surface Burner Caps and Surface Burner Grates
are installed correctly and at the correct locations.
1. Be sure to follow the installation instructions before
installing and using your new range.
2. Remove all packing tape from cooktop. Remove Burner
Caps and Burner Heads (See Figure 1).
3. Discard all packing material located under all Burner
Heads (if applicable).
4. To replace Burner Heads & Caps, match the letters
located under center of Burner Caps with the letters
located inside Burner Head (only positions A & F are
marked with letters - See Figure 2). Place all Burner
Heads & Caps on the cooktop (See Figure 1) while
carefully aligning the Electrodes into slots or holes of the
Burner Heads (Figure 4). Note: The Burner Heads should
sit flat on Cooktop Burner Skirts.
5. Replace Bridge Burner Caps. These include one Bridge
Burner Center Cap (rectangular shaped) and the two
Bridge Burner End Caps (The Bridge Burner End Caps
will fit either the front or rear Bridge Burner Head loca-
tions). Make sure that the tabs located under the Bridge
Burner Caps fall into the slots located in the Bridge
Burner Head (See arrows in Figure 3) and that all the
Bridge Burner Caps lie flat and evenly on the Bridge
Burner Head.
6. Unpack Burner Grates. NOTE: Do not force End Burner
Grates down on cooktop. Be careful to line up the 2 Grate
Pins located on each of the 2 End Burner Grates into the
Pilot holes located on top of the Burner Caps (See Figure
5). Position Burner Grates on cooktop and check that all
the Burner Grate legs lie on the glass surface.
7. Place Center Burner Grate between the end Burner
Grates.
REMEMBER -- DO NOT ALLOW SPILLS, FOOD,
CLEANING AGENTS OR ANY OTHER MATERIAL TO
ENTER THE GAS ORiFiCE HOLDER OPENING. Always
keep the Burner Caps and Burner Heads in place whenever
the surface burners are in use.
Qk
Bridg_ Burner Head
3 positions
not marked)
....t
Figure 3
Figure 1
Bridge
Burner
End
Cap
Bridge
Burner
Center
Cap
Bridge
Burner
End
Cap
A
must align into slot or hole
for each Burner Head
Figure 4
Figure 5
Locations of the Gas Surface Burners (See
Figure 6)
The SIMMER burner is best used for simmering delicate
sauces, etc. This burner is located at the right rear burner
position on the cooktop.
The STANDARD sized burner are used for most surface
cooking needs. These burners are located at the left front
and left rear positions on the cooktop.
The POWER burner is best used for bringing large
quantities of liquid rapidly up to temperature or when
preparing larger quantities of food. This burner is located at
the right front position on the cooktop.
The BRIDGE burner is best suited when using rectangular
or long shaped cookware. The left rear and left middle are
combined and controlled by the same control knob. The left
front burner may also be added for a total of 3 burners.
Figure 6
Setting Surface Controls
Do not place plastic
items such as salt and pepper shakers,
spoon holders or plastic wrappings on
top of the range when it is in use.
These items could melt or ignite.
Potholders, towels or wood spoons could
catch fire ifplaced too close to a flame.
In the event of an electrical power outage,
the surface burners can be lit manually.
To light a surface burner, hold a lit match
to the burner head, then slowly turn the
surface control knob to LITE. After burner
lights push in and turn knob to desired
setting. Use caution when lighting surface
burners manually.
Operating the Gas Surface Controls:
1. Place cooking utensil on surface burner.
2. Push the surface control knob down and turn counterclockwise out of
the OFF position (See Figure 1).
3. Release the knob and rotate to the LITE position. Note: All four
electronic surface ignitors will spark at the same time. However, only
the burner you are turning on will ignite.
4. Visually check that the burner has a flame.
5. Turn the control knob counterclockwise to the desired flame size.
The control knobs do not have to be set at a particular setting. Use the
knob indicator settings to adjust the flame as needed. DO NOT cook
with the surface control knob in the LITE position. (The electronic
ignitor will continue to spark if the knob is left in the LITE position.)
Setting Proper Surface Burner Flame Size
For most cooking, start on the highest control setting and then turn to a
lower one to complete the process. Use the recommendations below as a
guide for determining proper flame size for various types of cooking. The
size and type of utensil used and the amount of food being cooked will
influence the setting needed for cooking.
...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................}:i*
*Flame Size Type of Cooking
Figure 1
High Flame Start most foods; bring water to a boil; pan broiling.
Medium Flame Maintain a slow boil; thicken sauces, gravies; steaming.
Low Flame Keep foods cooking; poach; stewing.
*These settings are based on using medium=weight metal or
aluminum pans with lids. Settings may vary when using other types
of pans. The color of the flame is the key to proper burner adjustment. A
good flame is clear, blue and hardly visible in a well-lighted room. Each
cone of flame should be steady and sharp. Clean burner if flame is yellow-
orange.
Regardless of size, always select cookware that is suitable for the amount
and type of food being prepared. Select a burner and flame size
appropriate to the pan. Never allow flames to extend beyond the outer
edge of the pan.
Never extend the flame beyond the outer edge of the utensil. A higher
flame wastes heat and energy and increases your risk of being burned
by the flame (Figure 2).
For deep fat frying, use a thermometer and adjust the surface control
knob accordingly. If the fat is too cool, the food will absorb the fat and be
greasy. If the fat istoo hot, the food will brown quickly and the center will be
undercooked. Do not attempt to deep fat fry too much food at once as the
food will neither brown nor cook properly.
Figure 2
Improper
flame size
Setting Surface Controls (cont'd)
Setting the Bridge Burner
The Bridge Burner should be used with rectangular shaped cookware.
Cookware like the cast-iron Griddle that is supplied with your range is designed
specifically for best results with the Bridge Burner.
The Bridge Burner feature may be used to combine the cooking power of 2 or if
needed 3 gas surface Burners located along the left-hand side of the glass
cooktop.The left rear and left center Burners are controlled by the left rear surface
Control Knob. In addition the left front Burner may be added to the Bridge Burner
with the left front gas Control Knob (See Figure 1).
Operating the Bridge Burner
1. Push the left rear surface control knob in and turn counterclockwise out of
the OFF position (See Figure 2).
2. Release the knob and rotate to the LITE position (See Figures 2 & 3). Note:
All electronic surface ignitors will spark at the same time. However, only the
selected surface Burner will lite.
3. Visually check that the left rear Burner has lit.
4. Continue to rotate the gas control knob counterclockwise past the first LO
setting to the arrow marked BRIDGE.
5. Visually check that both the left rear and left center Burners are lit.
6. When both burners are lit, continue to turn the control knob
counterclockwise to adjust to the desired flame size for both burners
together. Note: The markings between the 2nd HI and LO settings on the left
rear control knob adjust the flame size for both burners. Use the guide marks
between the 2nd HI and LO settings and adjust the flame size as needed
(Refer to Figure 3).
7. Add the left front Burner if needed. Once lit,visually adjust the flame size of
the left front Burner to match the flame size of the Bridge Burner.
8. Place cooking utensil centered over the left-hand cooktop surface Burner
Grate. DO NOT cook with any of the surface control knobs in the LITE
position (The electronic ignitor will continue to spark if the knob is left in the
LITE position).
Note: If only the left rear surface Burner is needed, follow the instructions
provided below.
Figure 1
Operating only the Left rear Gas Surface Burner
1. Place cooking utensil centered over the left-rear surface Burner Grate.
2. Push the left rear surface control knob in and turn counterclockwise out of
the OFF position (See Figure 2).
3. Release the knob and rotate to the LITE position. Note: All electronic surface
ignitors will spark at the same time. However, only the left rear Burner will
ignite.
4.
Visually check that the left-rear burner has lit. Adjust the
flame size by turning the control knob between the first HI
and LO settings (See Figure 3). DO NOT cook with the
surface control knob in the LITE position (The electronic
ignitor will continue to spark if the knob is left in the LITE
position).
10
Left Rear Burner
flame adjustment
area
Figure 2
OFF
/
Lo
BridgeBurner flame
Figure 3 adjustment area
Surface Cooking
Use Proper Cookware
Cookware should
have flat bottoms that
make good contact
with the entire surface
heating element.
Check for flatness by
rotating a ruler across
the bottom of the Figure 1
cookware (See Figure
1). Be sure to follow
the recommendations for using cookware
as shown in Figure 2.
Note: The size and type of cookware used
will influence the setting needed for best
cooking results.
CORRECT
= Flat bottom and straight
sides.
• Tight fitting lids.
• Weight of handle does not tilt
pan. Pan is well balanced.
Pan sizes match the amount
of food to be prepared.
Made of material that
conducts heat well.
Easy to clean.
INCORRECT
• Curved and warped pan bottoms.
Pan overhangs burner grate by
more than 2.5 cm (1").
• Heavy handle tilts pan.
Flame extends beyond pan.
Note: Always use a utensil for its intended
purpose. Follow manufacturer's instructions.
Some utensils were not made to be used in
the oven or on the cooktop.
Using a wok
Woks with flat bottoms suitable for use
on your cooktop are available in most
cookshop or hardware stores. Round-
bottomed woks (with a support ring
that does not extend beyond the
burner circumference) may also be
used. The metal ring was designed to
support the wok safely when it is filled
with large amounts of liquids (soup
making) or fat (frying).
Wire trivets: Do not use wire trivets.
Cookware bottoms must be indirect
contact with the grates.
Figure 2
* Specialty pans such as lobster pots, griddles and pressure cookers may be
used but must conform to the above recommended cookware requirements.
DO NOT use a wok if it is equipped with
a metal ring that extends beyond the
burner circumference. Because this
ring traps heat, the surface unit and
cooktop surface could be damaged.
11
Surface Cooking
Care & Seasoning of the Griddle
Before first use:
• Wash Griddle in hot soapy water. Rinse and then dry completely.
• Apply a thin coat of vegetable oil to the entire surface (front and back of griddle).
• Preheat your oven to 350°E Place the griddle on the upper rack in your oven.
• Bake griddle for 1 hour at 350°F, then turn oven OFF and let cool before remov-
ing.
• The surface may appear to have a tacky feel to it from the seasoning process. Jf
desired, wash the griddle in hot soapy water, rinse well, and dry completely.
After each use:
• To prevent rusting, store in a dry place and keep uncovered.
• After each use, clean with a stiff brush and hot water only.
• DO NOT CLEAN GRIDDLE IN DISHWASHER.
• Dry immediately and apply a light coating of vegetable oil to griddle before
storing.
Using the Griddle:
• Place either side of the griddle centered over the left side gas burners or over
the Bridge Burner. For location refer to Figure 1.
• Preheat the griddle for 5 minutes on medium to medium low setting. Slow
preheat ensures even heat distribution during the cooking process.
• DO NOT preheat the griddle on HI setting. Preheating on HI may warp the
griddle and prevent even heat distribution.
i
Figure
Before Setting Oven Controls
_Thisrangehasafanthatwi_tum``_N_and"_FF_byitse_ft_keepthee_ectr_nicsc_tma_c_ntinue ]
to run after the range has been turned "OFF", but may also stop immediately and then turn "ON" after a while.
Oven Vent Location
The oven vent is located at right side of the front panel
and visible when the oven door is open. When the oven
is on, hot air is released through the vents. This venting is
necessary for proper air circulation in the oven and good
baking results. OVEN VENT
To remove, pull the rack forward until it stops. Lift up
front of rack and slide out. To replace, fit the rack onto
the guides on the oven walls. Tilt the front of the rack
upward and slide the rack back into place.
Removing and Replacing Oven Racks
@
12
Before Setting Oven Controls (cont'd)
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO OPERATING THE OVEN). Always use
oven mitts when the oven is hot.
RECOMMENDED RACK POSITIONS FOR
BROILING, BAKING & ROASTING
Food Rack position
Broiling meats, chicken or fish 3 or 4
Cookies, cakes, pies, biscuits &muffins 2 or 3
Frozen pies, angel food cake, yeast, bread, 1 or 2
casseroles, small cuts of meat or poultry
Rack
positions
Figure 1
Types of Oven Racks
Turkey, roast or ham 1
Note: Always use caution when removing food.
Flat Handle Oven Rack
Figure 2
Always use pot holders or
oven mitts when adjusting the oven racks.
Wait until the oven has completely cooled if
possible. Oven racks may be HOT and may
cause burns.
Your appliance may be equipped with one
or more of the oven rack types shown; Flat
Handle Oven Rack (Figure 2) and Flat
Oven Half Rack (Figure 3).
The Flat Half Rack has a removable insert Figure 4
that can provide extra space for larger food
items. The right half rack portion may still be used for other food items like a
casserole dish (See Figure 3). To remove the insert, squeeze on the left front
insert side (See Figure 4) of the rack and tilt out clockwise. To reinstall insert rear
hooks at back of insert (See Figure 5) and lay insert down. Make sure both insert
front hooks snap into rack (See Figure 5).
Do not use cookware that extends beyond the edge of the Flat Half Rack. For
best results, allow 2 inches between the pan placed on the rack and oven side or
rear walls.
Flat Half Oven Rack
Figure 3
Air Circulation in the Oven
®
Figure 5
1 Oven Rack
For best air circulation and baking results allow 2-4" (5-10 cm) around
the cookware for proper air circulation and be sure pans and cookware
do not touch each other, the oven door, sides or back of the oven
cavity. The hot air must circulate around the pans and cookware in
the oven for even heat to reach around the food.
13
Multiple Oven Racks
Control Pad Features
READ THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature
and function follow later in this Use & Care Guide.
DELAY START-- Use with
BAKE, COOK TIME and
CLEANto program a Delayed
Timed Bake or Delay Self-
Cleaning cycle start time.
OVEN COOK TIME--
Use to enter the length
of the baking time.
ADD 1 MINUTE--Use
to select Add 1 Minute
feature.
SLOW COOK--
Use to select the
Slow Cook feature.
CONV
to select the Convection
Convert feature.
FLEX CLEAN START--Use BAKE PAD-- BROIL PREHEAT-- 0 THRU 9
PAD-- Use to to start all Use to enter PAD-- Use Use to raise NUMBER PADS
select the Self- oven features the normal to select oven to -- Use to enter
Cleaning (not used Bake feature, variable cooking temperature and
feature, with Oven broil temperature, times.
Light). function.
OVEN LIGHT--Use to
turn the oven light ON
and OFF.
KITCHEN TIMER ON/OFF Use
to set or cancel the Kitchen
Timer. The Kitchen Timer does
not start or stop cooking.
Minimum and
Maximum
Control Pad
Settings
FEATURE
PREHEAT TEMP.
BAKE, CAKES, BREADS TEMP.
BROIL TEMP.
KITCHEN TIMER 12 Hr.
CLOCK TIME 12 Hr.
COOK TIME 12 Hr.
DELAY START 12 Hr.
CLEAN TIME
CONVECTION BAKE, MEATS TEMP.
STOP CLEAR--Use to
cancel any oven mode
previously entered except
the time of day and minute
timer. Press STOP/CLEAR
to stop cooking. STOP/
CLEAR also controls the
Oven Lockout feature.
Use to select the Warm
& Hold feature.
CONVECTION BAKE-- Use
to select the Convection
Bake feature.
MEATS, CAKES &
BREADS-- Use to select
the Meats, Cakes & Breads
cooking feature.
CLOCK SET-- Use to set
the time of day.
All of the features listed below have minimum and maximum time or temperature settings
that may be entered into the control. An ENTRY acceptance beep will sound each time a
control pad is touched (the Oven Lockout pad is delayed 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time
is below the minimum or above the maximum settings for the feature.
24 Hr.
24 Hr.
24 Hr.
24 Hr.
MINIMUM TEMP./TIME
170°F/77°C
170°F/77°C
400°F/205°C
0:01 Min.
0:01 Min.
1:00 Hr./Min.
0:00 Hr./Min.
0:01 Min.
0:01 Min.
1:00 Hr./Min.
0:00 Hr./Min.
2 hours
325°F/163°C
MAXIMUM TEMP./TIME
550°F/288°C
550°F/288°C
550°F/288°C
11:59 Hr./Min.
11:59 Hr./Min.
12:59 Hr./Min.
23:59 Hr./Min.
11:59 Hr./Min.
11:59 Hr./Min.
12:59 Hr./Min.
23:59 Hr./Min.
4 hours
550°F/288°C
14
Loading...