Kenmore Elite 38519010200 Owner’s Manual

UPDATE KENMORE ELITE® 19010
SYSTEM PROGRAM TO VERSION 2.0

Be sure to read and understand the following
instructions before beginning the update procedure°

CAUTION:

All of the saved data in the built-in memory will be
deleted when you perform the update process_ Save

your stored files on a PC card before beginning the
update_

E]Turn the power switch OFFL__.

Insert the 19010 Vero2.0 Update PC Card into the PC
card slot(_)o Make sure the PC card is completely

inserted into the slot..

Do not remove the PC card until you have

completed the steps below.

!2_Press the Auto-Lock button _.i'_and the Needle Up/Down

button_ at the same time, keeping them pressed
while you turn the power switch ON.

Do not release the buttons.

[_When a color bar appears _ on the left side of the

screen, release the buttons. The LCD screen and Start/
Stop button will turn different colors, and the buzzer will

beep when the updating process is finished_
When the update has been completed, the Start/Stop

button wilt remain green, and the word "Complete",,_2._
will appear on the LCD screen. This process may take

several minutes.

[]

O

Y

ii i ,i

[]

_F4_Turnthe power switch OFF, wait five seconds and turn

the power switch ON again.
You should notice that the opening screen briefly shows,

"Ver. 2.00" (_ instead of "Ver. 1_007
This confirms that the update has been installed, and
you can remove the PC card from the card slot(_,

If the screen shows "Vet. 130" instead of "Ver.

2.00," or the screen appears completely blank,

check the following:

• Did you properly insert the 19010 Ver. 2.00 Update PC
card?

• Did you accidentally turn off the machine before
update was complete?

To correct problem, turn the machine switch OFF
and repeat the update process beginning from Step 1.

tf you are unable to update your machine afterrepeated attempts, please call or emait:

1-877-SEWING-U (1-877-739-4648) 9am - 4:30 pm, CST, Monday - Friday.. .

[e-mail]

F_

[]

®

KENMORE ELITE 19010 VERSION 2.0
SUPPLEMENTARY INSTRUCTIONS

Conventional Sewing and Embroidery

1. Memory Space Indicator (refer to page 52)
An available memory space wilt be indicated when

saving a programmed stitch combination or embroidery
design,
The memory space Indicator informs you of the

available memory slze of the machine's built-in memory
or a CompactFlash card in Kilo Bytes (KB).

When you press the _ key, the save file window will
open°

Press the _ key to select the location of either the
internal memory of the sewing machine or a

CompactFlash card (adapter required).

]'he memory size of free space is indicated in the window.

NOTE:
If a CompactFlash card is not inserted, OKB of free space

witl be indicated.

SaveFile(Built4n)

FreeSpace:608KB

_002 -"

M_OOI

SaveFUe(Card:tSMB)

FreeSpace: 12,520KB

N__o61

saveFile(Card}

FreeSpace:OKB

[ B_i_,_.----i

Embroidery

2. Addlt!onal Built-in Embroidery Design Patterns

(refertopage 60)

Model 1901O,Version2°0 offers 26 additional embroidery
designs, which increases the total number of embroidery
designs to 48,

There are 4 pages in the built-in pattern selection window,,

!Designs

*100pSize F:5,0x4 3ir_ch

SSSS

3

HoopSize F:S0x4 3inch :,_

I

IiI

2