Kenmore Elite 11028062800, 11028072800 Owner’s Manual

E L I T E

Oasis

Automatic Washers

Lavadoras autom_ticas

Laveuses automatiques

,,=,,,_,,_:_,.:_ss,,,t.....o_.===,,J_;,x._.="_J_o....= ,J (,_, Id(,,=ll;>:[l

Models/Modelos/Modeles 110.2806_, 2807_

= color number, nQmero de color, numero de couleur

Designed to use only High Efficiency (HE) detergent

Disefiado para utilizar solamente detergente de alto rendimiento

Congu pour I'utilisation d'un detergent haute efficacite

seulement

Sears Roebuck and Co., Hoffman Estates, IL 60179, U.S.A. www.sears.com

Wt 0026667A Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8 www.sears.ca

TABLE OF CONTENTS

PROTECTION AGREEMENTS ....................................................... 2

WARRANTY ..................................................................................... 3

WASHER SAFETY ........................................................................... 3

INSTALLATION REQUIREMENTS ................................................ 4

Tools and Parts ............................................................................ 4

Location Requirements ................................................................ 5

Drain System ................................................................................ 5

Electrical Requirements ................................................................ 6

INSTALLATION INSTRUCTIONS .................................................. 6

Before You Start ........................................................................... 6

Remove Shipping Base and Packing Ring .................................. 6

Connect Drain Hose ..................................................................... 7

Connect the Inlet Hoses ............................................................... 8

Secure the Drain Hose ................................................................. 9

Level the Washer .......................................................................... 9

Complete Installation ................................................................. 10

BENEFITS AND FEATURES ....................................................... 10

Benefits ...................................................................................... 10

Features ..................................................................................... 10

WASHER USE .............................................................................. 11

Starting Your Washer ................................................................ 11

PROTECTION AGREEMENTS

Using the Proper Detergent ....................................................... 11

Pausing or Restarting the Washer ............................................. 12

Stopping the Washer ................................................................. 12

Changing Cycles, Modifiers, and Options ................................ 12

Status Lights .............................................................................. 13

Cycles ........................................................................................ 13

Modifiers .................................................................................... 15

Options ...................................................................................... 16

Operating Controls .................................................................... 16

Normal Sounds .......................................................................... 16

LAUNDRY TIPS ............................................................................ 17

WASHER CARE ............................................................................ 17

Cleaning Your Washer ............................................................... 17

Water Inlet Hoses ...................................................................... 18

Vacation, Storage and Moving Care ......................................... 18

TROUBLESHOOTING .................................................................. 19

Washer and Components ......................................................... 19

Washer Operation ..................................................................... 20

Clothing Care ............................................................................. 21

SERVICE NUMBERS ................................................................... 75

Master Protection Agreements

Congratulations on making a smart purchase. Your new Kenmore ® product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That's when having a Master Protection Agreement can save you money and aggravation.

The Master Protection Agreement also helps extend the life of your new product. Here's what the Agreement* includes:

,/ Parts and labor needed to help keep products operating

properly under normal use, not just defects. Our coverage goes well beyond the product warranty. No deductibles, no functional failure excluded from coverage-- real protection.

,/ Expert service by a force of more than 10,000 authorized

Sears service technicians, which means someone you can trust will be working on your product.

,/ Unlimited service calls and nationwide service, as often as

you want us, whenever you want us.

,/ "No-lemon" guarantee - replacement of your covered

product if four or more product failures occur within twelve months.

,/ Product replacement ifyour covered product can't be fixed. ,/ Annual Preventive Maintenance Check at your request- no

extra charge.

,/ Fast help by phone - we call it Rapid Resolution - phone

support from a Sears representative on all products. Think of us as a "talking owner's manual."

,/ Power surge protection against electrical damage due to

power fluctuations.

,/ $250 Food Loss Protection annually for any food spoilage

that is the result of mechanical failure of any covered refrigerator or freezer.

,/ Rental reimbursement if repair of your covered product

takes longer than promised.

,/ 10% discount off the regular price of any non-covered repair

service and related installed parts.

Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment online.

The Master Protection Agreement is a risk free purchase. If you cancel for any reason during the product warranty period, we will provide a full refund. Or, a prorated refund anytime after the product warranty period expires. Purchase your Master Protection Agreement today!

Some limitations and exclusions apply. For prices and additional information in the U.S.A. call 1-800-827-6655.

*Coverage in Canada varies on some items. For full details

call Sears Canada at 1-800-361-6665.

Sears Installation Service For Sears professional installation of home appliances, garage

door openers, water heaters, and other major home items, in the U.S.A. or Canada call 1-800-4-MY-HOME ®.

KENMORE ELITE®APPLIANCE WARRANTY

ONE YEAR LIMITED WARRANTY

When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME C®to arrange for free repair.

TEN-YEAR LIMITED WARRANTY ON STAINLESS STEEL

DRUM AND PLASTIC TUB

For ten years from the date of purchase, when this washer is installed, operated and maintained according to all instructions supplied with the product, Sears will replace the stainless steel drum and/or plastic tub due to defective materials or workmanship. After the first year, customer assumes any labor costs associated with replacement of these parts.

If this appliance is used for other than private family purposes, this warranty applies for only 90 days from the date of purchase.

THIS WARRANTY COVERS ONLY DEFECTS IN MATERIAL AND WORKMANSHIP. SEARS WILL NOT PAY FOR:

1. Expendable items that can wear out from normal use, including but not limited to filters, belts, light bulbs, and bags.

2. A service technician to instruct the user in correct product installation, operation or maintenance.

3. A service technician to clean or maintain this product.

4. Damage to or failure of this product if it is not installed, operated or maintained according to all instructions supplied with the product.

5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.

6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those recommended in all instructions supplied with the product.

7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided herein. Implied warranties, including warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law. Sears shall not be liable for incidental or consequential damages. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitations on the duration of implied warranties of merchantability or fitness, so these exclusions or limitations may not apply to you.

This warranty applies only while this appliance is used in the United States and Canada.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co.

Dept. 817WA, Hoffman Estates, IL 60179

Sears Canada Inc.

Toronto, Ontario, Canada M5B 2B8

PRODUCT RECORD

In the space below, record your complete model number, serial number, and purchase date. You can find this information on the model and serial number label located on the product.

Have this information available to help you obtain assistance or service more quickly whenever you contact Sears concerning your appliance.

Model number

Serial number

Purchase date

Save these instructions and your sales receipt for future reference.

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

• Read all instructions before using the washer. •

• Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline,

dry-cleaning solvents, other flammable, or explosive • substances as they give off vapors that could ignite or

explode. •

mDo not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water. These substances give off vapors that could ignite or

explode.

mUnder certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This wilt release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during this time.

SAVE THESE INSTRUCTIONS

INSTALLATION REQUIREMENTS

Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used

near children. Before the washer is removed from service or discarded,

remove the door or lid. Do not reach into the washer if the drum, tub or agitator is

moving.

Do not install or store the washer where it will be exposed to the weather.

Do not tamper with controls. Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in published user-repair instructions that you understand and

have the skills to carry out.

• See "Electrical Requirements" for grounding instructions.

Gather the required tools and parts before starting installation. The parts supplied are in the washer basket.

Tools needed for connecting the drain hose and water inlet hoses:

• Pliers that open to • Flashlight (optional) 1 9/16"(3.95 cm)

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates for

future reference.

Parts supplied:

A B C

A. Drain hose form B. Water inlet hoses (2)

C. Flat water inlet hose washers (4) D. Beaded tie strap

Tools needed for securing the drain hose and leveling the washer:

• Adjustable or open end • Wood block wrench 9/_6"(14 mm) • Ruler or measuring tape

• Level

Alternate Parts Parts listed are available from your local Sears store or Sears

Service Center. For further information, call 1-800-4-MY-HOME ® (1-800-469-4663).

If You Have:

Laundry tub or standpipe taller

than 96" (2.4 m) 1" (2.5 cm)

diameter standpipe

Overhead sewer

Floor drain

Water faucets 2 longer water fill hoses: beyond reach of fill 6 ft (1.8 m) Part Number 76314,

hoses 10 ft (3.0 m) Part Number 350008

You Will Need to Buy:

Sump pump system (if not already available)

2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe adapter, Part Number 3363920 and connector kit

Part Number 285835 Standard 20 gal. (76 L) 39" (99 cm) tall

drain tub or utility sink, sump pump and connectors (available from local

plumbing suppliers) Siphon break, Part Number 285834;

additional drain hose, Part Number 8318155 and connector kit,

Part Number 285835

If You Have: You Will Need to Buy: Lint clogged drain Drain protector, Part Number 367031

Selecting the proper location for your washer improves performance and minimizes noise and possible washer "walk."

Your washer can be installed in a basement, laundry room, closet, or recessed area. See "Drain System."

IMPORTANT: Do not install or store the washer where it will be exposed to the weather.

Proper installation is your responsibility.

You will need:

• A water heater set to deliver 120°F (49°C) water to the washer.

• A grounded electrical outlet located within 4 ft (1.2 m) of where the power cord is attached to the back of the washer. See "Electrical Requirements."

• Hot and cold water faucets located within 3 ft (90 cm) of the hot and cold water fill valves, and water pressure of 20-100 psi (138-690 kPa) for best performance.

• A level floor with a maximum slope of 1" (2.5 cm) under entire washer. Installing the washer on carpeting is not

recommended.

• A sturdy floor to support the washer weight (washer, water and load) of 315 Ibs (143 kgs).

Do not store or operate your washer in temperatures at or below 32°F (0°C). Some water can remain in the washer and can cause damage in low temperatures. See "Washer Care" for information on winterizing.

• Additional spacing should be considered for ease of installation and servicing.

• Additional spacing should be considered on all sides of the washer to reduce noise transfer.

For closet installation with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation openings are acceptable.

Companion appliance spacing should also be considered.

"_f 3"*

(7.6crn)

-N_I _ 3"*

(7.6cm)

-T

A. Front view

B. Side view

C. Closet door with vents

*Required spacing

The washer can be installed using the standpipe drain system (floor or wall), the laundry tub drain system, or the floor drain system. Select the drain hose installation method you need. See

"Tools and Parts."

Installation Clearances

The location must be large enough to allow the washer lid to open fully.

Washer Dimensions

20 ==

(50.8cm)

431/2"

(110.5cm)

271/2"

_(69.9 cm)

*Most installations require a minimum 5" (12.7 cm) clearance behind the washer for inlet and drain hoses. See "Connect Drain Hose" and "Connect the Inlet Hoses."

Installation spacing for recessed area and closet installations

Standpipe drain system--wall orfloor (views A & B)

The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). The minimum carry-away capacity can be no less than 17 gal. (64 L) per minute. A 2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe adapter kit is available. See "Tools and

Parts." The top of the standpipe must be at least 39" (99 cm) high and no

higher than 96" (244 cm) from the bottom of the washer.

39 It

(99 ore}

Laundry tub drain system (view C)

The laundry tub needs a minimum 20 gal. (76 L) capacity. The top of the laundry tub must be at least 39" (99 cm) above the floor and no higher than 96" (244 cm) from the bottom of the washer.

The following spacing dimensions are recommended for this washer. This washer has been tested for installation with spacing of 0" (0cm) clearance on the sides. Recommended spacing should be considered for the following reasons:

Floor drain system (view D)

The floor drain system requires a siphon break that may be purchased separately. See "Tools and Parts."

The siphon break must be a minimum of 28" (71 cm) from the bottom of the washer. Additional hoses might be needed.

To minimize possible shock hazard, the cord must be plugged into a mating, grounded 3 prong outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician.

• If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

• Do not ground to a gas pipe.

• Check with a qualified electrician if you are not sure the washer is properly grounded.

• Do not have a fuse in the neutral or ground circuit.

C D

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong.

Do not use an adapter. Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

• A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

• This washer is equipped with a power supply cord having a 3 prong grounding plug.

GROUNDING iNSTRUCTiONS

For a grounded, cord-connected washer:

This washer must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for electric current. This washer isequipped with a cord having an equipment-grounding conductor and a grounding plug. The

plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local

codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock, Check with a qualified electrician or serviceman if you are in

doubt as to whether the appliance is properly grounded,

Do not modify the plug provided with the appliance - if it will

not fit the outlet, have a proper outlet installed by a qualified electrician.

For a permanently connected washer: This washer must be connected to a grounded metal, permanent wiring system, or an equipment grounding

conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on

the appliance.

INSTALLATION INSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install washer. Failure to do so can result in back or other injury.

NOTE: To avoid floor damage during installation, set the washer onto cardboard before moving across floor.

IMPORTANT:

• Be sure the foam shipping base has been removed from the bottom of the washer as directed in the Unpacking

Instructions.

• If foam shipping base has not been removed, be sure lid is secured with tape before laying washer on its back.

• Removing the foam shipping base is necessary for proper operation.

1. Place cardboard supports from shipping carton on floor behind washer for support.

2. Secure the lid with tape.

3. Using 2 or more people, tip the washer onto its back and place on cardboard supports.

4. Remove foam shipping base.

Set washer upright.

Remove tape from lid. Open lid and remove foam packing ring from washer tub. Keep foam packing ring in case you

need to move the washer in the future.

Remove drain hose from washer cabinet

Pull the corrugated drain hose out of the washer by first grabbing the pull tie. Continue to pull the hose until the end emerges. Do

not force excess drain hose back into the rear of the washer.

i ii ii

Laundry tub drain or standpipe drain

Connecting the drain hose form to the corrugated drain hose

©onned : ©nigh Hose

Proper connection of the drain hose protects your floors from damage due to water leakage. Read and follow these

instructions. The drain hose is connected to your washer and is stored inside

the washer cabinet.

q--

4.5"

(11.4cm)

A. Drain hose reliefs

1. Feed end of drain hose into one end of form. Place end of drain hose form into the drain hose relief.

2. Bend the hose over the top of the form and feed into the other end of the form. Attach the other end of the form into the other drain

hose relief. The hose must extend 4_/2'' (11.4 cm) beyond the form.

To keep drain water from going back into the washer:

• Do not force excess drain hose into standpipe. Hose should be secure but loose enough to provide a gap for air.

• Do not lay excess hose on the bottom of the laundry tub.

Floor drain

Do not install the drain hose form on to the corrugated drain hose. You may need additional parts. See Floor drain under "Tools and Parts."

©on sect ....

Insert new flat washers (supplied) into each end of the inlet hoses. Firmly seat the washers in the couplings.

Connect the inlet hoses to the washer

A B

A. Coupling B. Washer

Connect the inlet hoses to the water faucets

Make sure the washer basket is empty.

2. Attach the hose labeled hot to the hot water faucet. Screw on coupling by hand until it is seated on the washer.

3. Attach the hose labeled cold to the cold water faucet. Screw on coupling by hand until it is seated on the washer.

4. Using pliers, tighten the couplings with an additional two-thirds turn.

Tighten the couplings with an additional two-thirds turn.

HOT COLD

A. Hot water inlet valve B. Cold water inlet valve

1. Attach the hot water hose to the inlet valve labeled hot.

2. Attaching one hose coupling first makes it easier to tighten the connection with pliers.

3. Screw on coupling by hand until it is seated on the washer.

Using pliers, tighten the coupling with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

Clear the water lines

• Run water through both faucets and inlet hoses, into a laundry tub, drainpipe or bucket, to get rid of particles in the water lines that might clog the inlet valve screens.

• Check the temperature of the water to make sure that the hot water hose is connected to the hot water faucet and that the

cold water hose is connected to the cold water faucet.

Attach the cold water hose to the inlet valve labeled cold.

Screw on coupling by hand until it is seated on the washer.

Using pliers, tighten the coupling with an additional two- thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

Check for leaks

• Turn on the water faucets and check for leaks. A small amount of water might enter the washer. You will drain this in

a later step. NOTE: Replace inlet hoses after 5 years of use to reduce the

risk of hose failure. Record hose installation or replacement dates for future reference.

If you connect only one water hose, you must cap off the remaining water inlet port.

Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.

Drape the power cord over the console.

Remove any cardboard used to move washer.

Beaded tie strap

Fasten the drain hose to the laundry tub leg or drain standpipe with the beaded tie strap. See view A or B.

A B C

If the washer faucets and the drain standpipe are recessed, put the formed end of the drain hose into the standpipe.

Tightly wrap the tie strap around the water inlet hoses and the drain hose. See view C.

3. Lower right front foot until it contacts the floor. By hand, firmly rotate foot as much as an additional 11/=turns. The other three

feet have been preset at the factory.

4. Check the levelness of the washer by placing a level in the crease between the top of the washer and the cabinet, first

on the front and then on the side.

Level the fronL

Excessive Weight Hazard

Use two or more people to move and install washer, Failure to do so can result in back or other injury,

One washer foot has been installed at a different height on your new washer. The other three feet were preset at the factory. Properly leveling your washer will minimize noise and vibration.

1. Slide the washer to its final location.

2. Push on upper front panel to be sure the washer is on its rear feet.

Level the side.

5. If the washer is not level, move the washer out slightly, tip back, prop up the front of the washer on awood block. Adjust the feet up or down as necessary by twisting the feet. Repeat steps 1 through 4 until washer is level.

6. Use a 9/16"or 14 mm open-end wrench to turn the Iocknut counterclockwise on the foot tightly against the washer

cabinet. IMPORTANT: If the Iocknut is not tight against the washer

cabinet, the washer may vibrate.

1. Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended grounding method. See "Electrical Requirements."

2. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

3. Check that you have all of your tools.

4. Keep the foam packing ring from the washer tub for future relocation of the washer. Dispose of/recycle all packaging

materials.

5. Check that the water faucets are on.

6. Check for leaks around faucets and inlet hoses.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

7. Plug into a grounded 3 prong outlet.

8. Remove any protective film or tape remaining on the washer.

9. Read "Washer Use."

To test and to clean your washer, measure W of the detergent manufacturer's recommended amount of High Efficiency (HE) powdered or liquid detergent for a medium-size load and pour it into the detergent dispenser. Close the lid. Press POWER. Select a normal cycle and press START. Allow it to complete one whole cycle.

Auto Water Level

This washer senses the load size and composition through a series of fills and wash motion. It then adjusts the water level for the best cleaning and rinsing performance. It eliminates the guesswork. The water level is just right for every wash load size. NOTE: You may notice during a cycle that the wash load is not completely submerged in water. This is normal for your washer.

Auto Temperature Control (ATC)

The Auto Temperature Control (ATC) on this washer electronically senses and maintains a uniform water temperature by regulating incoming water temperatures. Using ATC will help dissolve detergent.

INVIZIBLE TM Agitator

Your new washer works differently than most washers that you are accustomed to. The most striking difference is that the washer has an invisible agitator. It uses this new innovative agitator at the bottom of the wash basket to move your load through a mixture of water and detergent. The load is moved from the outside toward the middle with items coming up in the center and down on the outside edges.

Dispensers

The dispensers make your washer truly automatic. It is unnecessary for you to return to the washer during the cycle to add detergent, bleach, or fabric softener.

Laundry products are automatically added to the load at the proper time in the wash cycle.

Spin Speeds

This washer is preset to automatically select the spin speed based on the cycle selected. Depending on your wash load, you can change the preset speeds. The spin speed on this washer is nearly twice as fast as that of a conventional washer. You may notice different sounds during a spin cycle because of this higher speed.

Stain Treat (CATALYST ®Cleaning Action) The Stain Treat option helps to ensure better soil and stain

removal. Stain Treat reduces the need for pretreatment and is safe for all fabrics. Water flushes through the dispenser to dissolve the detergent. The detergent mixture is then sprayed onto the load while the washer spins at low speed. This cleaning action will last up to 5 minutes depending on the cycle selected. The washer then stops spinning, fills with water to the appropriate level and continues washing with the selected cycle.

BENEFITS AND

FEATURES

Your washer has several benefits and features that are

summarized here. Some items may not apply to your model.

Gentlewash TM High-Efficiency Wash System

Your new top loading, high-efficiency washer saves you time by allowing you to do fewer, larger loads. It also conserves resources and also lowers your water and energy bills by using the following innovations.

High Efficiency (HE) Detergent

This washer is designed for High Efficiency (HE) detergent use only. HE detergents are made to produce the right amount of suds and give the best performance in low water wash systems.

Innovative Features

Your new washer includes these features that help to reduce noise, increase the ease of use and improve wash performance.

Electronic Controls

Electronic controls with preset cycles are easy to use whether you are a beginner or an "expert."

Quiet Operation

This washer is insulated with sound-dampening materials to reduce washer operation sounds and noises.

Suspension System

To reduce washer "vibration," "walk," and "out-of-balance" conditions, your new washer combines:

• 4 Spring damper struts to isolate vibration

• Balance ring at the top and bottom of the wash basket to minimize vibration

• Operating software designed to sense and correct off- balance loads

Clean Washer Cycle This washer features an easy-to-use Clean Washer cycle that

thoroughly cleans the inside of your washing machine using higher water volumes in combination with liquid chlorine bleach.

Stainless Steel Basket

The stainless steel basket is corrosion resistant and enables higher spin speeds for more water extraction reducing drying

time.

WASHER USE

Force Filter Wash/Rinse System

This washer filters 100% of the wash and rinse water. The water is filtered then recirculated. The force filter traps sand and dirt,

flushing them down the drain, so they are not redeposited onto the clean clothes.

Delay Start

Delay Start allows you to load your washer and pause the start of the cycle for up to 13 hours.

End of Cycle Signal

The End of Cycle Signal produces an audible sound when the wash cycle is finished. This signal is helpful when you are removing items from the washer as soon as itstops.

Spray Rinse

This washer is designed to save water by rinsing the load with a spray rinse instead of a deep water rinse on some cycles. When using fabric softener, always select Fabric Softener or 2nd Rinse from the options.

STATUS

AddAGarment@

Power Casual / Express

Wrinkle Free Wash

Normal _

D'_t Heavy ._

(O" Duty

Ri_IseIDrain& Spin Whitest

/0 Whites Delicate / Towels

Clean Washer

NOTE: Your washer model may vary from the model shown.

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil. Do not dry anything that has ever had any type of oil on

it (including cooking oils). Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

WASH CYCLES

Handwash

The following is a guide to starting your washer. Periodic references to other sections of this manual provide more detailed

information.

Use only High Efficiency detergents. The package for this type of detergent will be marked "HE" or "High Efficiency." This wash system, along with less water, will create too much sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer errors, longer cycle times, and reduced rinsing performance. It may also result in component failures and noticeable mold or mildew. HE detergents are made to produce the right amount of suds for the best performance. Follow the manufacturer's instructions to determine the amount of detergent to use. Remember, concentrated detergent such as 2x or higher will use less detergent based on load size.

1. Place a load of sorted clothes into the washer. See "Laundry Tips."

MODIFERS OPTIONS

Heaw

_ Nor_al _, Warm/ Cold \'_J/'

Soil Spin Wash / Rinse

Level Speed Temp

ADus's_d_lye

Use only "HE" High Efficiency detergent.

Auto I_r#p C_,t rol

Low Cold / Cold ,_

Oi @ 2rid Rinse

. (_). @ Auto Soak

@ Cycle Signal

Stain Treat

@ Prewash

Load evenly to maintain washer balance. Mix large and

small items.

For best performance, load garments in loose heaps evenly around the basket wall. Do not load above the stainless steel portion of the basket, as shown.

Pour measured powdered or liquid High Efficiency (HE) detergent into the detergent dispenser. Do not put detergent directly into the wash tub or onto clothes in the washer.

• The fabric softener is dispensed in the rinse cycle. If 2nd Rinse is selected, the fabric softener will be dispensed during the 2nd Rinse.

• Do not use fabric softener dispensing balls in this washer. Dispensing balls will not operate correctly with this

washer.

• Do not spill or drip any fabric softener onto the clothes.

• At the end of the cycle, a small amount of water may be left in the dispenser. This is normal.

NOTE: Use only liquid fabric softener in this dispenser.

5. Close the washer lid.

6. Press POWER. This turns on the washer display.

7. Select a Wash Cycle. See "Cycles."

8. Adjust the Modifiers, if desired. See "Modifiers."

9. Select desired Options. See "Options."

10. Select Delay Start, if desired. See "Delay Start" in the "Modifiers" section.

11. Press START. The wash cycle begins, and the display shows the estimated remaining time. The lid will lock.

NOTE: If you do not press Start within 5 minutes of pressing Power, the washer automatically shuts off.

Add liquid chlorine bleach to the bleach dispenser, if needed. Chlorine bleach is automatically dispensed at the proper time during the wash cycle.

• Do not overfill. Do not dilute. Do not use more than 1 cup (250 ml) for a full load. Use less with a smaller load size.

• Follow the garment and chlorine bleach manufacturer's directions for proper use.

• To avoid spilling, use a cup with a pouring spout. Do not

let bleach splash, drip, or run down into the washer basket.

• At the end of the cycle, a small amount of water may be

left in the dispenser. This is normal.

Pour measured liquid fabric softener into the fabric softener dispenser, if desired.

• If you are using fabric softener, be sure to select Fabric Softener from the options to assure proper dispensing.

• Do not overfill. Do not dilute. The dispenser holds 3 oz (94 mL), or a capful of fabric softener.

Add A Garment

You can place additional clothing in the wash when the "Add A Garment" status light is glowing without sacrificing wash

performance.

To add a garment or pause the washer at any time

1. Press STOP once.

2. Wait until the Lid Lock light turns off, then open the lid.

3. Add items.

To restart the washer

1. Close the lid and press START.

2. To unlock the lid after the Add A Garment period, press STOP once. Pressing STOP twice will cancel the wash cycle.

opp 9jthe sse

You can stop the wash cycle and drain the tub by pressing the STOP button twice or the POWER button once.

° ° __ _ _ •_s¸ _,._'__ _ _i_ ,_e

You can change Cycles, Modifiers, and Options anytime before Start is pressed. Not all Modifiers and Options are available for all cycles.

• A short tone sounds when a change is selected.

• Three short tones sound if an unavailable combination is selected. The last selection will not be accepted.

Changing Cycles during the wash cycle

1. Press STOP twice to cancel the cycle. The washer will drain.

2. Press POWER.

3. Select the desired wash cycle.

4. Select the desired Modifiers and Options.

5. Press START.

The washer restarts at the beginning of the new cycle. NOTE: If you do not press Start within 5 minutes of pausing the

washer, the washer automatically shuts off.

Changing Modifiers and Options during the wash cycle

You can change a Modifier or Option anytime before the selected Modifier or Option begins. You must:

1. Press STOP once.

2. Select the desired Modifiers and/or Options.

3. Press START.

To manually drain the washer and spin the load

1. Press STOP twice to cancel the wash cycle and drain the washer.

2. Press POWER.

3. Press RINSE/DRAIN & SPIN.

4. Press 2nd RINSE.

5. Press START.

When the spin is complete, the lid unlocks. Items can be removed from the washer.

These lights show which portion of the cycle the washer is operating. They also indicate when you can add other garments

to the wash load.

STATUS

Add A Garment @

Soak/ Prewash@

Wash

Turn the knob to choose the correct wash cycle for the type of load you are washing. When the knob points to a cycle, the indicator light for the cycle will glow. If the preset cycle setting for the Modifiers and Options are suitable for your wash load, you may press START to begin the wash cycle.

Casual / Express

Wrinkle Free Wash

Normal Bulky /

Heavy - Sheets

Duty

Whitest _Colors /

Whites Delicate Towels

Bedding

Handwash

Preset Cycle Settings

For ease of use, preset cycle settings provide the recommended fabric care settings for each cycle.

To use the preset cycle settings:

1. Press POWER.

2. Select the cycle you want by turning the knob. The preset cycle settings will be displayed (see following chart).

NOTE: The preset cycle times may vary slightly depending on your model.

3. Press START. The wash cycle will begin.

Rinset

Spin@

ClothesClean t_

LidLock

Clothes Clean

The Clothes Clean light stays on until the lid is opened or the Stop or Power button is pressed.

Lid Lock

When the Lid Lock status light glows, the washer lid is locked. NOTE: You must wait until the Lid Lock light turns off before the

lid can be opened.

Indicator lights An indicator light shows which Cycle, Modifiers, and Options you

have selected.

Estimated Time Remaining

Cycle time in minutes will appear in the display while you are making selections. The total cycle time will appear, including an

estimated time for drain and fill times.

NOTES:

• The time is an estimation only and may vary depending on load size, cycle, modifiers, and options selected.

• You may notice the time adjusting during the cycle. This is normal.

• The cycle time may be extended if oversudsing occurs or the load is unbalanced.

Preset Cycle Settings

Cycle Preset Soil Level* Wash/Rinse

Minutes Temp

Whitest Whites 79 Heavy Hot/Cold

(No ATC)

Heavy Duty 69 Heavy Hot/Cold

(No ATC)

Normal 41 Normal Warm/Cold

Casual/Wrinkle Free 44 Medium Warm/Cold

Light Express Wash 33 Light Warm/Warm Bulky/Bedding 52 Normal Warm/Cold

Sheets 49 Normal Warm/Cold

Colors/Towels 45 Normal Cool/Cold

Delicate/Handwash 36 Light Cool/Cold

Rinse & Spin 24 Not Cold/Cold

applicable

Drain & Spin 14 Not Not

applicable applicable

Clean Washer 60 Not Not

applicable applicable

*Cycle time in minutes will appear in the display while you are

making selections. The total cycle time will appear, including an estimated time for drain and fill times.

NOTE: Load only to the top of the stainless steel basket. Overloading can cause poor cleaning. See "Starting Your

Washer."

Wl_itest Whites This cycle introduces liquid chlorine bleach to the load at the

proper time for improved whitening of your heavily soiled white fabrics. Cycle combines high-speed wash action and high-speed spin. The default option setting for this cycle is 2nd Rinse to thoroughly remove detergent and bleach. For maximum soil and stain removal, liquid chlorine bleach should be used.

Heavy Duty

Use this cycle for heavily soiled cotton or sturdy items. Cycle combines high-speed wash action and high-speed spin. Stain Treat is a preset cycle setting for this cycle, but it may be turned off. See "Changing Cycles, Modifiers and Options." This cycle uses a spray rinse to maximize water efficiency.

Normal

Use this cycle for normally soiled cottons and mixed fabric loads. Cycle combines high-speed wash action and high-speed spin. This cycle uses a spray rinse to maximize water efficiency.

Casual/Wrinkle Free

Use this cycle to wash loads of no-iron fabrics such as sport shirts, blouses, casual business clothes, permanent press and blends. This cycle uses medium-speed wash action, a medium- speed spin and a cool down process to reduce wrinkling.

Express Wash

Use this cycle to wash a few lightly soiled items that are needed in a hurry. This short cycle combines high-speed wash action and high-speed spin for the best cleaning and shortened dry times. This cycle uses a spray rinse to maximize water efficiency.

Bulky/Bedding

This cycle is designed for oversized items that do not easily absorb water, such as comforters, pillows and poly-filled jackets. This cycle gently washes these nonabsorbent items in a preset water level to avoid damage. This cycle starts with a soak to thoroughly saturate your large item. This is followed by medium wash action and medium spin speeds to maintain load balance.

NOTE: Due to the preset water level, using this cycle for items other than those described above will create an unbalanced load.

Sheets Use this cycle for sheets, pillowcases and blankets. The wash

action of this cycle is designed to help keep large items from tangling and bailing up.

IMPORTANT: For best performance, load garments in loose heaps evenly around the basket wall. Do not load above the stainless steel portion of the basket.

Colors/Towels

Use this cycle for lightly soiled, colored clothing or towels. This cycle uses medium speed wash action and high speed spin.

Delicate/Handwash

Use this cycle to wash lightly soiled special care garments or for items labeled as "Machine Washable Wool or Silk." (Check label instructions to make sure that the garment is washable.) This cycle uses intermittent-low speed wash action and low-speed spin for the gentlest fabric care with less wrinkling.

When washing waterproof/water-resistant items such as plastic lined mattress pads, shower curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting available for the cycle and washer model being used.

Garments are labeled "Handwash" because:

• The fiber construction may be sensitive to wash action.

• The fabric contains sensitive dyes that may bleed. NOTE: Some "Handwash" items naturally shrink when washed.

Keep this in mind when you purchase items labeled "Handwash." Items that shrink should be dried flat. When these items are still

wet, "block" them by gently stretching to the original measurements.

Rinse/Drain & Spin The Rinse & Spin and Drain & Spin cycles are selected with the

same button.

Rinse/Drain & Spin

Rinse & Spin This option performs a rinse only followed by a high-speed spin.

The time display will include an estimate of how long it will take to fill and drain the washer.

When to use Rinse & Spin:

• For loads that need rinsing only.

• For completing a cycle after the power has been off. To use Rinse & Spin setting:

1. Press RINSE/DRAIN & SPIN button once. The Rinse & Spin indicator light, along with the Spin Speed, Water Temperature

and 2nd Rinse lights will glow. You may change the Spin Speed and Water Temperature modifiers only.

NOTE: A Rinse & Spin cycle time of approximately 24 minutes will appear in the Estimated Time Remaining display.

2. Press START.

Drain & Spin An extra drain and spin may help shorten drying times for some

heavy fabrics or special-care items. Drain & Spin may also be used for draining the washer after canceling a cycle or

completing a cycle after a power failure. To use Drain & Spin setting:

1. Press RINSE/DRAIN & SPIN button once. The Rinse & Spin indicator light, along with the Spin Speed, Water Temperature

and 2nd Rinse lights will glow. You may change the Spin Speed modifier only.

2. Press 2nd RINSE to deselect Rinse & Spin. The 2nd Rinse and Water Temperature lights will shut off to indicate that a

Drain & Spin cycle has been selected. NOTE: A Drain & Spin time of approximately 14 minutes will

appear in the Estimated Time Remaining display.

3. Press START. IMPORTANT: Water will dispense in the washer for a

moment, the lid will unlock, lock again, and then the Drain & Spin cycle will continue. This is normal.

Clean Washer

Use the Clean Washer cycle once a month to keep the inside of your washer fresh and clean. This cycle uses a higher water level in combination with liquid chlorine bleach to thoroughly clean the inside of your washing machine. See "Cleaning Your Washer."

CleanWasher

USEBLEACHONLY

IMPORTANT: Do not add detergent to this cleaning cycle. Use only liquid chlorine bleach. Do not place garments or other items

in the washer during the Clean Washer cycle. Use this cycle with an empty wash tub.

Modifiers allow you to further customize your cycles and save energy.

Soil Level (Wash Time)

Soil level is preset for each cycle. See "Preset Cycle Settings" in "Cycles." As you press the Soil Level pad, the cycle time (minutes) will increase or decrease in the Estimated Time Remaining display. To get the minimum wash time, press the pad until the indicator light next to Light illuminates. This is the shortest wash time available for that cycle.

T Heaw _Med Heaw

t Normal

MedLight

ALight

Soil

Level

ADJUSTS WASN TIME

• For most loads, use the time recommended in the preset cycle settings.

• For heavy soil and sturdy fabrics, press SOIL LEVEL to select more wash time, if needed.

For light soil and delicate fabrics, press SOIL LEVEL to select less wash time, if needed.

Spin Speed

This washer automatically selects the spin speed based on the cycle selected. The preset speeds can be set at a higher or lower

spin speed to match the clothes load. Spin speeds may vary by cycle.

High

Medium Low

Spin

Speed

Wash/Rinse Temp Select a water temperature based on the type of load you are

washing. Use the warmest wash water safe for fabrics. Follow garment label instructions.

Warm rinses leave the loads drier and more comfortable to handle. However, warm rinses may increase wrinkling. Cold

rinses may help with wrinkling and save energy.

Auto Tcrnp Control

_Cool / Cold

Cold / Cold

Wash / Rinse

Temp

Temperature Guide

Wash Water Temperature Suggested Fabrics

Hot Whites and pastels Warm Bright colors

Cold Darker colors that bleed or fade

NOTE: In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils may be difficult to remove.

Auto Temp Control Auto Temp Control (ATC) electronically senses and maintains a

uniform wash and rinse water temperature. ATC regulates incoming hot and cold water. The ATC is automatically turned On

when a cycle is selected. (See "Preset Cycle Settings" in "Cycles.")

ATC is available with Warm/Warm, Warm/Cold and Cool/Cold settings. The water temperature in the Hot/Cold and Cold/Cold

settings depend on the water temperature at the water inlet faucets.

• ATC ensures consistent cleaning.

• Heated water consumes the largest amount of energy that a washer uses.

• Today's detergents work well at temperatures above 60°F (15.6°C).

Delay Start You can use the Delay Start feature to delay the start of a wash cycle for up to 13 hours (depending on your model).

1. Load the washer and fill the dispensers.

2. Close the washer lid.

3. Press POWER.

4. Select the desired Cycle, Modifiers and Options.

5. Press DELAY START. 1H (one hour) will be displayed in the time display window. The indicator light for Delay Start will

glow.

_xX

Delay Start

6. For a longer delay time, press DELAY START. The Start time will increase by 1-hour steps.

Press START. The countdown to the wash cycle will show in the time display window, and the Delay Start indicator light will begin to flash.

NOTE: The Start indicator light will not flash when Delay Start is chosen. You must press Start to initiate a countdown for the cycle to begin.

To change the Delay Start time:

• Press STOR

• Press DELAY START to select the desired delay time.

• Press START to begin the countdown. To cancel Delay Start:

Press START again to begin the cycle right away, or press STOP twice to cancel the cycle.

Use these pads to select the desired options for your wash cycle..

OPTIONS

_Cycle Signal

_ Fabric Softener

_ Stain Treat

Prewash

When Auto Soak is selected, the washer saturates the load with water and detergent then pauses to allow the detergent to work on soils. The pause is followed by a slow-speed spin. The washer pauses and spins six times before advancing to the desired wash cycle. Auto Soak adds approximately 12 minutes to the wash cycle.

Fabric Softener

The Fabric Softener option must be selected if liquid fabric softener is added to the fabric softener dispenser, unless a 2nd Rinse is selected. This option flushes the dispenser at the right time in a deep water rinse for optional distribution. This option may also be selected if a spray rinse isnot desired.

Power

Press POWER to turn the washer on or off.

Power

Start Press START to start your washer after a cycle has been

selected. Be sure all desired Modifiers and Options have been selected. The lid must be closed for the washer to start.

IMPORTANT: Water will be dispensed in the washer for a moment, the lid will unlock, lock again, and then the cycle will

continue. This is normal.

_ 2nd Rinse

Auto Soak

Cycle Signal The End of Cycle Signal produces an audible sound when the

wash cycle is finished. This signal is helpful when you are removing items from the washer as soon as it stops. The End of Cycle Signal is on when option is lit.

Stain Treat/Prewash

• This option provides enhanced cleaning action for tough stains. The Heavy Duty cycle automatically includes Stain Treat. Choosing Stain Treat will add approximately 5 minutes to a cycle. Stain Treat should be started on a dry load only and should not be selected after the tub has started filling with water. Stain Treat may be selected as an option on all other cycles.

• When Prewash is selected, the washer fills to the desired water level. It then alternates between 1 minute of wash

action and a 1-minute pause period three consecutive times with an extended pause to end the cycle. When Prewash is complete, the washer advances to the selected wash cycle. The Prewash option extends your wash time by approximately 11 minutes.

2nd Rinse/Auto Soak

Press the option button for 2nd Rinse/Auto Soak until your desired choice is highlighted.

• 2nd Rinse can be selected to aid in the removal of

detergent or bleach residue from garments. This option

provides an additional rinse with the same water temperature as the first rinse. This is the default rinse setting for the Whitest White cycle. Fabric softener will be dispensed in the 2nd rinse.

Stop Press STOP once to pause or stop the washer at any time. Press

START to continue the cycle. Press STOP twice to turn off the washer. Press STOP once to unlock the lid and add a garment.

s,>_oUNto@

No;,ms Sounds

Your new washer may make sounds your old one didn't. Because the sounds might be unfamiliar, you may be concerned about them. These sounds may be normal.

During washing

If you select the Stain Treat option, you will hear a spin/spray noise at the start of the cycle.

During drain If water is drained quickly from your washer (depending on your

installation), you may hear air being pulled through the pump during the end of draining.

During wash and spin This washer does not have a transmission. The motor provides

direct drive for wash and spin. You will hear sounds that are different from those of a conventional washer.

LAUNDRY TIPS

Preparing clothes for washing

Follow these recommendations to help you prolong the life of your garments.

• Use only High Efficiency detergents. The package for this type of detergent will be marked "HE" or "High Efficiency." This wash system, along with less water, will create too much sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer errors, longer cycle times, and reduced rinsing performance. It may also result in component failures and noticeable mold or mildew. HE detergents are made to produce the right amount of suds for the best performance. Follow the manufacturer's instructions to determine the amount of detergent to use. Remember, concentrated detergents such as 2x or higher will use less detergent based on load size.

Use only "HE" High Efficiency detergent.

• Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, and other hard objects to avoid scratching the washer interior. Remove non-washable trim

and ornaments.

• Empty pockets and turn them inside out.

• Turn down cuffs; brush away lint and dirt.

• Turn synthetic knits inside out to avoid pilling.

• Tie strings and sashes so they will not tangle.

• Mend tears, loose hems, and seams.

• Treat spots and stains.

• Stained or wet garments should be washed promptly for best results.

Sorting

• Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together. Separate lint-givers (towels, chenille) from lint-takers (corduroy, synthetics, permanent press). When possible, turn lint-givers inside out.

• Separate dark colors from light colors, colorfast items from noncolorfast items.

• Sort by fabric and construction (sturdy cottons, knits, delicate items).

• Separate bulky, nonabsorbent items such as comforters, pillows and poly-filled jackets. Use the Bulky/Bedding cycle

for these items.

• Separate sheets, pillowcases, and blankets and use the Sheets cycle for these items. For best performance, load garments in loose heaps evenly around the basket wall. Do not load above the stainless steel portion of the basket.

• When washing waterproof/water-resistant items such as plastic lined mattress pads, shower curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting available for the cycle and washer model being used.

Cycle Options

• For additional performance enhancements to desired cycle, select options such as Stain Treat, Fabric Softener and 2nd

Rinse.

Loading/Unloading

• For best performance, load garments in loose heaps evenly around the basket wall. Do not load above the stainless steel

portion of the basket.

• Remove clothes from washer after the cycle is completed. Metal objects such as zippers, snaps, and buckles may rust if left in the washer basket for a long time.

WASHER CARE

Washer Maintenance Procedure

This washer has a special cycle that uses higher water volumes in combination with liquid chlorine bleach to thoroughly clean the inside of the washing machine.

NOTES:

• Read these instructions completely before beginning the cleaning process.

• It is recommended that you allow the cleanout cycle to complete without interruptions. If necessary, the cleanout cycle may be cancelled by pressing the STOP button twice.

IMPORTANT: Ifthe cleanout cycle is cancelled, run a Rinse & Spin cycle to ensure that all remaining bleach is rinsed from

the washer.

Begin procedure

1. Open the washer lid and remove any items from the washer.

2. Add liquid chlorine bleach to the bleach dispenser.

• Add 1 cup (250 mL) liquid chlorine bleach to the bleach dispenser.

NOTE: Do not add any detergent to this cleaning cycle. Use of more than 1 cup (250 mL) of bleach will cause product damage over time.

3. Close the lid.

4. Press POWER.

5. Press CLEAN WASHER.

• The Estimated Time Remaining display will show approximately 60 minutes.

6. Press START.

• The cycle will begin and water will dispense in the washer for a moment and pause, then the lid will lock and the cycle will

continue.

• Once the cleaning cycle has begun, allow the cycle to complete. An estimated cycle time will appear on the display.

• If the procedure does not sufficiently improve the machine freshness, evaluate your installation and usage conditions for

other causes.

Alwaysdothefollowingtomaintainwasherfreshness

• Useonly High Efficiency (HE)detergent for your wash loads.

Cleaning the exterior

Use a soft damp cloth or sponge to wipe up any spills. Occasionally wipe the outside of your washer to keep it looking new. Use mild soap and water. Do not use abrasive products.

_ t_ __Oc_c

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges,

kinks, cuts, wear or leaks are found. When replacing your inlet hoses, mark the date of replacement

on the label with a permanent marker.

Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your

washer. If storing or moving your washer during freezing weather, winterize it.

Non-use or vacation care: Operate your washer only when you are at home. If you will be on

vacation or not using your washer for an extended period of time, you should:

• Unplug washer or disconnect power.

• Turn off the water supply to the washer. This helps avoid unintended flooding (due to a water pressure surge) while you are away.

To winterize washer:

1. Shut off both water faucets.

2. Disconnect and drain water inlet hoses.

3. Put 1 qt (1 L) of R.V.-type antifreeze in the basket.

4. Run washer on the Rinse & Spin setting for about 30 seconds to mix the antifreeze and remaining water.

5. Unplug washer or disconnect power.

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

2. Plug in washer or reconnect power.

3. Run the washer through the Bulky/Bedding cycle to clean the washer and remove the antifreeze, if used. Use only High Efficiency (HE) detergent. Use V2the manufacturer's

recommended amount for a medium-size load.

To transport the washer:

1. Shut off both water faucets.

2. Disconnect and drain water inlet hoses.

3. If the washer will be moved during freezing weather, put 1 qt (1 L) of R.V.-type antifreeze in the basket. Run washer on the Rinse & Spin setting for about 30 seconds to mix the antifreeze and remaining water.

4. Disconnect the drain from the drain system.

5. Unplug the power cord.

6. Place the inlet hoses into the basket.

7. Drape the power cord and drain hose over edge into the

basket.

8. Place foam packing ring from the original shipping materials in the top of washer. If you do not have the original foam packing ring, place heavy blankets, towels, etc. into basket opening. Close the lid and put a piece of tape over the lid and down to the front of the washer. Keep lid taped until the washer is placed into the new location.

Reinstalling the washer

1. Follow the "Installation Instructions" to locate, level and connect the washer.

2. Run the washer through the Bulky/Bedding cycle to clean the washer and remove the antifreeze, if used. Use only High Efficiency (HE) detergent. Use V2the manufacturer's

recommended amount for a medium-size load.

TROUBLESHOOTING

First try the solutions suggested here and possibly avoid the cost of a service call...

_@ ,__s_¸ +__ _,,_ _ J_ _s_

Washer displaying code messages

_- "LF"

Lr (Washer is taking too long to fill)

Check the following:

Are the water inlet hoses kinked or clogged? Are the water inlet valve screens clear?

Is the drain hose installed properly? See "Connect the Drain Hose."

Press STOP to clear display.

_ "Ld" (Washer is taking too long to drain water fromLQ

the wash tub) Check the following: Is the drain hose kinked or clogged? Is the drain hose installed properly? See "Connect the Drain Hose." Press STOP to clear display.

Lr_."uL" (Unbalanced Load) If the load is unbalanced, the washer will display this code while running an imbalanced load correction routine at the end of the wash cycle and before the final spin. If the code remains and the wash cycle dial is flashing after the recovery routine has stopped, open lid and redistribute the load. Close lid and press START.

NOTE: For best performance, load garments in loose heaps evenly around the basket wall. Do not load above the stainless steel portion of the basket.

• _L "oL" (Over Load) Is the washer overloaded? The washer has attempted to fill

and begin the wash cycle. If the washer is overloaded, it will drain any water and detergent that was added during the fill.

To correct the overload, remove several items and add detergent. Close lid and press START.

• _ "Sd" (Suds Detected)

Did you use regular detergent?

Regular or hand-washing detergents are not recommended for this washer. Use only High Efficiency ("HE") detergent.

Did you add too much detergent? Always measure detergent. Follow detergent manufacturer's directions. Remember, concentrated detergents such as 2x or higher will use less detergent based on load size.

If excessive suds are detected, the washer will display this code while running a suds reduction correction routine at the end of the wash cycle. The suds reduction routine removes extra suds and assures proper rinsing of your garments. If the code remains and the wash cycle dial is flashing after the recovery routine has stopped, re-select your desired cycle using cold water. Press START. Do not add detergent.

t _ "lid" (Lid Opened)

Is the lid open? Close the lid to clear the display. If the lid remains open for more than 10 minutes, water in the wash

tub will drain.

• H_ "HC" (Cold and Hot hoses switched) This code will appear at the end of the wash cycle to indicate

that the cold and hot water inlet hoses are switched. See "Connect the Inlet Hoses."

" "dL"

• OL (Door/Lid cannot lock) Indicates lid is not locked. Check for items caught in the lid keeping it from closing. Press STOP once to clear the code.

• dU "dU" (Boor/Lid cannot unlock) Is there excessive weight on the lid, such as a basket of

laundry? Excessive weight will keep the lid from unlocking. Press STOP once to clear the code.

• F__ "F##" code

Press STOP once to clear code. Press START. If code appears again, call for service.

Noisy, vibrating, off-balance

• Is the washer level? Does the washer rock when pushed against the corners?

The washer must be level. The front and rear feet must be in firm contact with the floor. Check that the Iocknuts are

tightened. See "Level the Washer."

• Is the floor flexing, sagging or not level? Flooring that flexes or is uneven can contribute to noise and vibration of the washer. A 3/4"(1.9 cm) piece of plywood

under the washer will reduce the sounds. See "Location Requirements."

• Did you load the washer as recommended? For best performance, load garments in loose heaps evenly

around the basket wall. Do not load above the stainless steel portion of the basket.

• Is the load balanced? Evenly distribute the load in the washer basket and make

sure the height of the load does not exceed the top of the stainless steel portion of the basket. See "Starting Your

Washer."

• Do you hear clicking or other noises when the cycle changes from washing to draining or spinning? When the drive system shifts or the washer basket settles between cycles you may hear noises that are different from your previous washer. These are normal washer noises.

• Is the washer gurgling or humming? When the washer drains, the pump will make a continuous humming with periodic gurgling or surging sounds as the final

amounts of water are removed. This is normal.

Are you washing a small load?

You will hear more splashing sounds when washing small loads. This is normal.

The washer basket moves while washing.

This is normal. Can you hear water spraying? This is part of the wash

action.

Are you washing items with metal snaps, buckles or zippers?

You may hear metal items touching the basket. This is normal.

Did you select the Bulky/Bedding cycle?

Use the Bulky/Bedding cycle only for oversized, nonabsorbent items such as comforters, pillows or poly-filled jackets. Other items will create an unbalanced load in this cycle.

Washer leaks

• Are the fill hoses tight?

• Are the fill hose washers properly seated? Check both ends of each hose. See "Connect the Inlet

Hoses."

Did you pull the drain hose from the washer cabinet and install it in a standpipe or laundry tub?

The drain hose should be pulled from the washer cabinet and secured to the drainpipe or laundry tub. See "Connect Drain

Hose" and "Secure the Drain Hose."

• Is the sink or drain clogged? Sink and drainpipe must be able to carry away 17 gal. (64 L) of water per minute. Ifsink or drainpipe is clogged or slow, water can back up out of drainpipe or sink.

• Is water splashing off the tub ring or the load? The wash load should be balanced and not overloaded. If the

wash load is unbalanced or overloaded, incoming water can deflect off the load.

• Is the washer properly installed? The washer must be level. The feet should be properly installed and the nuts tightened. See "Level the Washer."

• Did you select Stain Treat option and use a hand-washing detergent? Regular or hand-washing detergents are not recommended for this washer. Use only High Efficiency ("HE") detergent.

• Check household plumbing (laundry tubs, faucets,

drainpipe, water pipes) for leaks.

Wash load odor

• Are you using too much or too little detergent? Follow the detergent manufacturer's recommendation for correct amount for the load size, and soil level for your load. Remember, concentrated detergents such as 2x or higher will use less detergent based on load size.

• Do you remove clothing from your washer as soon as the cycle finishes? Unload the washer as soon as it stops to avoid prolonged

moist conditions.

• Are your clothes thoroughly dry before putting them

away?

Always make sure wash loads are thoroughly dry before putting them away.

• Do you use the hottest water safe for the clothing? Some soils and stains are only released with warmer water. Remaining soils and stains on clothing can lead to odors.

Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong.

Do not use an adapter. Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Dispenser operation

• Are the laundry products in the correct dispensers? Add the correct amounts of detergent (powdered or liquid), bleach, or fabric softener to the correct dispenser.

• Is there water remaining in the bottom of a dispenser? Did the dispenser drain properly? A small amount of water may be left in a dispenser at the end of the cycle. This is normal.

Washer odor

Are you running the Clean Washer cycle with bleach on a regular basis?

Cleaning your washer on a regular basis helps avoid odor causing residue from building up.

Are you using HE detergent? Use of non-HE detergent can cause a film residue which can result in odor on your washer and on your load.

Washer won't fill, rinse or agitate; washer stops

Is the power cord plugged into a grounded 3 prong outlet?

Plug power cord into a grounded 3 prong outlet. Are you using an extension cord?

Do not use an extension cord. Is there power at the plug?

Check electrical source or call electrician.

Is the indicator on the Cycle Control knob properly lined up with a cycle?

Turn the Cycle Control knob to the right slightly. Are the water inlet valve screens clogged?

Turn off the water and remove inlet hoses from the washer. Remove any accumulated film or particles. Reinstall hoses,

turn on water and check for leaks.

Are the hot and cold water faucets turned on?

Turn on the water. Is the water inlet hose kinked?

Straighten the hoses.

Does the water level seem too low, or does the washer appear to not fill completely?

The Auto Water Level feature senses the size of the load and adds the correct amount of water for the load size. You may

notice during a cycle that the wash load is not completely submerged in water. This is normal and necessary for clothes

to move.

Has a household fuse blown, or has a circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Is the washer in a normal pause in the cycle?

The washer may pause during certain cycles. Allow the cycle to continue.

Is the washer overloaded?

Wash smaller loads. See "Starting Your Washer" for maximum load size.

• Is there oversudsing? Cancel the current cycle. Press RINSE/DRAIN & SPIN to drain the load. Re-select your desired cycle and press START. Do not add detergent. Use cold water.

• Is the lid open? The lid must be closed during operation. The washer will not operate with the lid open.

• Did you add more items to the load once the washer started?

Once the load is wet, there may appear to be space for more items. Do not add more than 1 or 2 garments after the cycle has started. For best results determine load size with dry items only.

Wash/Rinse temperature

Are the hot and cold water inlet hoses reversed?

If the hot and cold water inlet hoses are reversed, the washer will display an "HC" error code at the end of the cycle. See

"Connect the Inlet Hoses."

Are you washing many loads?

As your frequency of loads washed increases, the water temperature may decrease for hot and warm temperatures.

This is normal.

Do you have an ENERGY STAR washer?

The wash water temperatures may feel cooler to you than those of your previous washer. This is normal.

Does the wash water temperature feel lower than usual? As washing progresses, the wash temperature will decrease slightly for hot and warm washes. This is normal.

To reduce wrinkling, the warm rinse is regulated to be cooler than the warm wash.

Excessive sudsing

• Did you use a non-HE detergent? Regular or hand-washing detergents are not recommended

for this washer. Use only High Efficiency ("HE") detergent. Remember, concentrated detergents such as 2x or higher will

use less detergent based on load size.

Washer continues to fill or drain, or the cycle seems

stuck

Is the top of drain hose lower than the control knobs on washer?

The top of the drain hose must be at least 39" (99 cm) above the floor. See "Drain System."

Does the drain hose fit too tightly in the standpipe, or is it taped to the standpipe? The drain hose should be loose yet fit securely. Do not seal the drain hose with tape. The hose needs an air gap. See

"Installation Instructions."

Washer won't drain or spin; water remains in washer

• Is the drain hose clogged, or the end of the drain hose more than 96" (244 cm) above the floor?

See "Drain System."

• Is the lid open? The lid must be closed during operation. The washer will not

operate with the lid open.

• Is there excessive sudsing? Always measure detergent. Follow detergent manufacturer's

directions. Ifyou have very soft water, you may need to use less detergent. Use only High Efficiency ("HE") detergent.

Remember, concentrated detergents such as 2x or higher will use less detergent based on load size.

Is there excessive sudsing? Always measure detergent. Follow detergent manufacturer's directions. Ifyou have very soft water, you might need to use less detergent.

Selecting a Fabric Softener or 2nd Rinse option will help flush excess suds from your washer.

Cycle did not run Stain Treat option

• Did you select the Stain Treat option? The Stain Treat option must be selected for it to be included in a wash cycle.

• The Stain Treat option is a preset cycle setting in the Heavy Duty cycle and may be added to other cycles.

Load too wet

• Did you use the right cycle for the load being washed? Select a higher spin speed.

• Did you use a cold rinse? Cold rinses leave loads wetter than warm rinses. This is normal.

Did you wash an extra large load?

A large unbalanced load could result in a reduced spin speed and wet clothes at the end of the cycle. Evenly distribute the

load around the basket wall and do not load above the stainless steel portion of the basket. Select Drain and Spin to

remove excess water from the load.

Residue or lint on load

Stains, gray whites, dingy colors

• Did you add detergent to the dispenser? For best results, use the dispenser to dissolve the detergent.

• Did you sort properly? Sort lint givers (towels, chenille) from lint takers (corduroy, synthetics). Also sort by color.

• Did you overload the washer? The wash load must be balanced and not overloaded.

Clothes should move freely. Lint or powdered detergent can be trapped in the load if overloaded. Wash smaller loads. See "Starting Your Washer" for maximum load size.

• Did you use enough detergent? Follow detergent manufacturer's directions. Use enough detergent to hold the lint in the water.

• Did you line dry your clothing? If so, you can expect some lint on the clothing. The air movement and tumbling of a dryer removes lint from the load.

• Was paper or tissue left in pockets?

• Is your water colder than 60°F (15.6°C)? Wash water colder than 60°F (15.6°C) may not completely dissolve the detergent.

• Did you use the proper Soil Level and Wash Cycle for the

load?

Reducing wash time (duration) and wash speed are ways to reduce lint.

Did you select a cycle with a spray rinse?

Heavy Duty, Normal, and Express Cycles are preset with a spray rinse to maximize water efficiency. For loads with particulates such as sand or lint, a 2nd Rinse option can be added to all cycles to aid in the removal of particulates, detergent, and bleach residues.

Load is wrinkled, twisted ortangled

• Did you unload the washer promptly? Unload the washer as soon as it stops.

• Did you use the right cycle for the load being washed? To reduce wrinkling, tangling and twisting, select a cycle with

low wash speeds, such as Delicate/Handwash or Casual/ Wrinkle Free, or select a lower spin speed.

• Did you overload the washer? The wash load must be balanced and not overloaded. Loads

should move freely during washing to reduce wrinkling, tangling and twisting.

• Was the wash water warm enough to relax wrinkles? If safe for the load, use warm or hot wash water. Use cold rinse water.

Are the hot and cold water hoses reversed?

Check that the hot and cold water hoses are connected to the correct faucets. If the hot and cold water inlet hoses are

reversed, the washer will display an "HC" error code at the end of the cycle. See "Connect the Inlet Hoses." A hot rinse

followed by spin will cause wrinkling.

• Did you properly sort the load? The transfer of dye can occur when mixing whites and colors in a load. Sort dark clothes from whites and lights.

• Was the wash temperature too low? Use hot or warm washes if safe for the load. Make sure your hot water system is adequate to provide a hot water wash.

• Did you use enough detergent, or do you have hard

water?

Use more detergent for washing heavy soils in cold or hard water. Water temperature should be at least 60°F (15.6°C) for soap to dissolve and work properly. For best performance, use the detergent manufacturer's recommended amounts.

• Did you follow the manufacturer's directions when adding detergent and fabric softener? Measure detergent and fabric softener. Use enough detergent to remove soil and hold it in suspension. Do not dilute fabric

softener.

• Is there above average iron (rust) in water? You may need to install an ironfilter.

• Did you add detergent to the dispenser? For best results, use the dispenser to dissolve the detergent.

• Did you add fabric softener directly to the load? Use your fabric softener dispenser. Do not drip fabric softener

onto clothes.

• Did you use a fabric softener dispensing ball? Use the fabric softener dispenser provided with the washer. Dispensing balls will not operate correctly with this washer.

• Did you unload the washer promptly? To avoid the transfer of dye, unload the washer as soon as it stops.

• Did you add detergent, chlorine bleach or fabric softener

too late in the cycle?

Detergent, chlorine bleach, and fabric softener should be added to the dispensers before starting the washer.

• Did you use Express Wash on a large load? Express Wash is designed to wash only a few items for best

results.

• For additional performance enhancements, select option

such as Stain Treat, Fabric Softener and 2nd Rinse to desired cycle.

• For heavily soiled garments, select an Extra Rinse to assure stains, soils, and detergents are thoroughly rinsed from the

load.

Garments damaged

Load not rinsed

• Were sharp items removed from pockets before washing? Empty pockets, zip zippers, snap or hook fasteners before washing to avoid snagging and tearing of load.

• Were strings and sashes tied to avoid tangling? Straps and strings can easily become entangled in the load, causing strain on seams and tearing.

• Were items damaged before washing? Mend rips and broken threads in seams before washing.

• Did you overload the washer? The wash load must be balanced and not overloaded. Loads

should move freely during washing. Be sure not to load above the stainless portion of the basket.

• Did you add chlorine bleach properly? Do not pour chlorine bleach directly onto load. Wipe up bleach spills. Undiluted bleach will damage fabrics. Do not place load items on top of the bleach dispenser when loading and unloading the washer (on some models). Do not use

more than the manufacturer's recommended amount for a full load. Do not dilute.

• Did you follow the garment manufacturer's care label

instructions?

• Did you use the proper detergent? Regular or non-HE hand-washing detergents are not recommended for this washer. Use only High Efficiency ("HE") detergent.

• Did you follow the manufacturer's directions when adding detergent and fabric softener?

Always measure detergent and fabric softener carefully. Follow detergent manufacturer's directions. If you have very

soft water, you might need to use less detergent. Remember, concentrated detergents such as 2x or higher will use less

detergent based on load size. Selecting a Fabric Softener or Extra Rinse option will help

flush excess suds from your washer.

• Did you select the Fabric Softener button? If liquid fabric softener is added to the dispenser, the Fabric

Softener option must be selected.

• Was the Water Save Spray Rinse selected? This spray rinse optimizes the water used for rinsing the load.

If extra rinsing is needed due to skin sensitivities, a high sudsing detergent, or particulates in the load, such as sand or

lint, select the Extra Rinse option.

+ 53 hidden pages