Kenmore Elite 11027082601, 11027082602, 11027082603, 11027082604, 11027086601 Owner’s Manual

We have taken great care to give your new washer the most convenient and easy-to-use features. Use this guide to help optimize the use of your
washer. Consult the Use and Care Guide for more detailed instructions. To contact the Sears Service Center, call 1-800-4-1VlY-HOIVIE° (1-800-469-4663).

STATUS

u_r cnl

C 0t_e, Cle,3,

ger,u_was * r'unyon¢o_,_cJty • r_ p,_9

Models/Modelos/Modeles 110.2708:_, 2709:_

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.

Do not use an extension cord.
Failure to follow these instructions can result in

death, fire, or electrical shock.

1. Raise lid and load clothes into basket. Do not load

clothes above the top of the stainless steel basket.

2. Add detergent to the HE detergent dispenser. Use
only High Efficiency ("HE") detergent.

3. (Optional) Add liquid chlorine bleach to the bleach
dispenser.

4. (Optional) Add liquid fabric softener to the fabric
softener dispenser.

5. Lower the lid.

.......... iiiii iiiiiil

Fire Hazard

Never place items in the washer that are
dampened with gasoline or other flammable fluids.

No washer can completely remove oil.
Do not dry anything that has ever had any type of

oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.

,,Press POWER.

,,Select wash cycle.

NOTE: Washer cycle settings have preset
selections for optimal performance. If desired, these
settings can be changed inmost cases.

,,(Optional) Adjust Modifiers.
,,(Optional) Select Options.

,. ,, Press START.

J

Add A Garmen|/Lid Lock

_ This washer allows for additional garments to be added

8566926 Continued on back

to the load when the Add A Garment status light is

glowing. Press STOP once to pause the cycle. When

the Lid Lock status light glows, the washer lid is
locked. When the Lid Lock light turns off, open the lid

and add garments.

Whilesl Whiles

This cycle introduces liquid chlorine bleach to the load at
the proper time for improved whitening of heavily soiled
white fabrics. The default option for this cycle is 2nd

Rinse.

Heavy Duty

This cycle is for heavily soiled or sturdy items. Stain Treat

is the default option for this cycle: but it can be turned off.

See "Changing Cycles, Modifiers and Options" in the Use
and Care Guide.

Normal

This cycle may be used for normally soiled cottons and

mixed fabric loads.

Casual/Wrinkle Free

This cycle can be used to wash loads of no-iron fabrics
such as sport shirts, blouses, casual business clothes,

permanent press and blends.
Fxp_ss Wash

This cycle may be used to wash 1 or 2 lightly soiled items
that are needed in a hurry.

Bulky/Bedding

This cycle is designed for oversized items that do not
easily absorb water, such as comforters, pillows and

poly-filled jackets. Other items will create an unbalanced
load in this cycle.

SheelsfTowels

Use this cycle for sheets, pillowcases and towels. The wash
action of this cycle is designed to keep large items from
tangling and baling up.

IMPORTANT: For best performance, drop items in loose

heaps evenly around the basket wall. Do not load items
directly on the impeller for this cycle.

Darks/Colors

This cycle may be used for dark or highly dyed natural
fabrics such as jeans or other cotton items that may be
susceptible to dye loss.

Delicale/Handwash

Use this cycle to wash lightly soiled special care garments
or for items labeled as "Machine Washable Wool or Silk."

(Check label instructions to make sure that the garment is
washable.) This cycle uses intermittent-low speed wash

action and low-speed spin for the gentlest fabric care with

P ewash

Clean Washer

Save l:nergy Plus

This option reduces wash and rinse water

temperatures to save energy while adding about

5 minutes of wash time to maintain performance. This

option is available on only the Heavy Duty and Whitest

Whites cycles and must be selected prior to starting

the washer.

2nd Rinse

An extra rinse can be used to aid in the removal of

detergent or bleach residue from garments. This option

provides an additional spray rinse with the same

water temperature as the first rinse.

Stain ll_al

This option provides enhanced cleaning action for

tough stains, virtually eliminating the need to pretreat

them. Stain Treat should be started on a dry load

only.

Auto Soak/Prewash

Use these options for set-in stains and soils that need

extra time for removal. Press the Option button for Auto
SoatdPrewash until your desired choice is
lighted.

Auto Soak saturates the load with water and detergent

then pauses to allow the detergent to work on soils.

Prewash alternates between periods of wash action

and pauses.

Delay Start

You can use the Delay Start feature to delay the start of
a wash cycle for up to 13 hours (depending on your
model). The Start time will increase by 1-hour steps.
Once you have set the desired delay time, you must

press START. The delay time will then show in the

display.

Clean Washer - Not for Clothing

This special cycle uses higher water volumes in

combination with liquid chlorine bleach to thoroughly
clean the inside of the washing machine. The Clean
Washer cycle should be used once a month to

maintain washer freshness.

Power

This button turns the washer on or off.

%_S +" Soil level is preset for each cycle. As you press

| the Soil Level pad, the cycle time (minutes) will

_j_ increase or decrease in the Estimated Time Remaining

jJ_/tigl %_% display.

G Mdi'Jm } SpinSpeed

_% _ow ,J This washer automatically selects the spin speed

_+<_fY based on the cycle selected. The preset speeds can

_J+_ be changed for most of the cycles.

_=p_o/% Wash/Rinse Temp

_Hol:/(:od Select a water temperature based on the type of load

_ _' you are washing. Use the warmest wash water safe

_ WrmlJ for fabrics.

8566926

® Registered Trademark / TM Trademark / s_ Service Mark of

Sears Brands, LLC used under licensee by Sears Canada Inc.

Sla_

This button starts your washer after a cycle has been

selected or restarts the cycle after the Stop button
has been pressed. All Modifiers and Options should

be selected before starting the cycle. The lid must be

closed for the washer to start.

Slop

Pushing this button once will pause the wash cycle

and unlock the lid, allowing you to add a garment.

Pushing this button twice will stop the cycle and turn

off the washer.

NOTE:
,,You must wait until the Lid Lock light turns off before

the lid can be o

l

Printed in U.S.A.

12/05