Kenmore FPX930 Installation Manual

FPX930 series

instructions instructions

«∞∑FKOLU‹

œß∑u¸«∞FLKNU

English 2 - 8

Français 9 - 17

´¸∂w

≠U¸ßv

52 - 13

81 - 42

1.5





























 



















+++



















efore using your Kenwood appliance

●

Read these instructions carefully and retain for future reference.

●

emove all packaging and any labels.

safety

●

The blades and discs are very sharp, handle with care.

lways hold by the finger grip at the top,

way from the cutting edge, both when handling

a and cleaning.

●

Do not lift or carry the processor by the handle - or the

andle may break resulting in injury.

●

Always remove the knife blade before pouring contents from the bowl.

●

eep hands and utensils out of the processor bowl and

K liquidiser goblet whilst connected to the power supply.

●

Switch off and unplug:

●●

before fitting or removing parts

●

when not in use

●●

before cleaning

●

Never use your fingers to push food down the feed tube. Always use the pusher/s supplied.

●

Never fit the blade unit to the power unit without the liquidiser or mill jar fitted.

●

Before removing the lid from the bowl or liquidiser or mini chopper/mill from the power unit:-

●●

switch off;

●

wait until the attachment/blades have completely stopped;

●●

be careful not to unscrew the liquidiser goblet or mini chopper/mill from the blade assembly.

●

Liquids should be allowed to cool to room temperature before blending.

●

Do not use the lid to operate the processor, always use the on/off speed control.

●

This appliance will be damaged and may cause injury if the interlock mechanism is subjected to excessive force.

●

Always unplug your food processor when not in use.

●

Never use an unauthorised attachment.

●

Never leave the appliance unattended when it is operating.

●

Never use a damaged appliance. Get it checked or repaired: see ‘service & customer care’.

●

Never let the power unit, cord or plug get wet.

●

Don’t let excess cord hang over the edge of a table or worktop or touch hot surfaces.

●

Do not exceed the maximum capacities stated in the recommended speed chart.

●

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

●

Children should be supervised to ensure that they do not play with the appliance.

●

Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

●

isuse of your processor/liquidiser can result in injury.

●

The maximum rating is based on the attachment that draws the greatest load. Other attachments may draw less power.

Refer to the relevant section under “using the attachments”

or additional safety warnings for each individual attachment.

efore plugging in

●

Make sure your electricity supply is the same as the one

hown on the underside of your appliance.

●

his appliance conforms to EC directive 2004/108/EC on

T Electromagnetic Compatibility and EC regulation no. 1935/2004 of 27/10/2004 on materials intended for contact

ith food.

efore using for the first time

1 Remove the plastic blade covers from the knife blade. Take

are the blades are very sharp. These covers should

e discarded as they are to protect the blade during

b manufacture and transit only.

2 Wash the parts see ‘care & cleaning’

key processor

 power unit  detachable drive shaft  bowl  lid  feed tube  pushers  safety interlocks  cord storage (at back)  speed/pulse control  power on light

liquidiser

 filler cap  lid  lid seal  goblet  sealing ring  blade unit

mini chopper/mill

 blade unit  sealing ring  jar  sprinkler lid

additional attachments

knife blade dough tool twin beater geared metal whisk maxi-blend canopy thick slicing/coarse grating disc thin slicing/fine grating disc fine (Julienne style) chipper disc rasping/parmesan disc citrus juicer mini processor bowl centrifugal juicer KENSTORE™ attachments carousel spatula

choosing a speed for all functions

tool/Attachment function speed maximum

apacities

knife blade One Stage Cake Mix 1 – 8 1.5Kg

astry - rubbing fat into flour 5 – 8 340g

P Adding water to combine pastry ingredients 1 – 5 Chopping/pureeing/pates 8 600g

nife blade with maxi-blend canopy Soups – start at a low speed and move up to Max 1 – 8 1.5 litres

k whisk Egg Whites 8 6 Egg Whites

gg & sugar for fatless sponges 8

E Cream 5 – 8 500 mls

ough tool Yeasted mixes 8 600g

d discs – slicing/grating/chipping Firm food items such as carrots, hard cheese. 5 – 8

ofter items such as cucumbers, tomatoes 1 – 5

S rasping disc Parmesan cheese, Potato for German potato dumplings 8 citrus juicer Citrus fruits 1 mini bowl All processing 8 200g liquidiser All processing 8 1.5 litres mini chopper/mill Herbs 8 10g

Nuts & Coffee Beans 8 50g centrifugal juicer Fruits & Vegetables 8 500g

to use your food processor

1 Fit the detachable shaft onto the power unit . 2 Then fit the bowl. Place the handle towards the back and

turn clockwise until it locks .

3 Fit an attachment over the drive shaft.

●

Always fit the bowl and attachment onto the processor before adding ingredients.

4 Fit the lid  - ensuring the top of the drive shaft locates into

the centre of the lid.

●

Do not use the lid to operate the processor, always use the on/off speed control.

5 Plug in and the power on light will come on. Switch on and

select a speed. (Refer to the recommended speed chart).

●

The processor will not operate if the bowl or lid are not fitted correctly to the interlock. Check that the feed tube and bowl handle are situated to the right hand side.

●

Use the pulse (P) for short bursts. The pulse will operate for as long as the control is held in position.

6 Reverse the above procedure to remove the lid, attachments

and bowl.

●

Always switch off and unplug before removing the lid.

important

●

Your processor is not suitable for crushing or grinding coffee beans, or converting granulated sugar to caster sugar.

●

When adding almond essence or flavouring to mixtures avoid contact with the plastic as this may result in permanent marking.

to use your liquidiser

1 Fit the sealing ring  into the blade unit  - ensuring the

seal is located correctly. Leaking will occur if the seal

is damaged or incorrectly fitted.

2 Screw the goblet onto the blade assembly. 3 Put your ingredients into the goblet. 4 Push the lid seal onto the underside of the lid. 5 Fit and lock the filler cap in the lid, by turning one position

6 Fit the lid to the goblet and turn the filler cap to to

lock. The filler cap can be located in 3 different positions (see

- filler cap removable for adding ingredients to the goblet.

- lid unlocked/filler cap locked to the lid for fitting and removing the lid.

- lid locked.

7 Place the liquidiser onto the power unit and turn to lock .

●

The appliance will not operate if the liquidiser is incorrectly fitted to the interlock.

8 Select a speed (refer to the recommended speed chart) or

use the pulse control.

●

Liquids should be allowed to cool to room temperature before blending.

hints

●

When making mayonnaise, put all the ingredients, except the oil into the liquidiser. Then with the machine running, pour the oil into the filler cap and let it run through.

●

Thick mixtures, eg pates and dips, may need scraping down. If it’s difficult to process, add more liquid.

●

Ice crushing - operate the pulse in short bursts until crushed to the desired consistency.

●

To ensure the long life of your liquidiser, never run it for longer than 60 seconds. Switch off as soon as you’ve got the right consistency.

●

he processing of spices is not recommended as they may

T damage the plastic parts.

●

The appliance will not work if the liquidiser is incorrectly

itted.

●

To blend dry ingredients - cut into pieces, remove the filler cap, then with the appliance running, drop the pieces down

ne by one. Keep your hand over the opening. For best

o results empty regularly.

●

Don’t use the liquidiser as a storage container. Keep it

mpty before and after use.

●

Never blend more than 11⁄2 litres - less for frothy liquids like milkshakes.

Note: The mini chopper/mill base is not

nterchangeable with the glass liquidiser goblet.

i The processor will not operate if the wrong base is fitted. Refer to graphics on blade unit bases.

to use your mini chopper/mill

Use the mini chopper/mill for milling herbs, nuts and coffee beans.

1 Put your ingredients into the jar. 2 Fit the sealing ring into the blade unit . 3 Turn the blade unit upside down. Lower it into the jar, blades

down. 4 Screw the blade unit onto the jar until it is finger tight. 5 Place the mini chopper/mill onto the power unit and turn to

lock . 6 Switch on to maximum speed or use the pulse control. 7 After milling, you can replace the blade unit with the sprinkler

lid and shake out your food.

●

The sprinkler lid is not airtight.

safety

●

Never fit the blade unit to your food processor without the

jar fitted.

●

Never unscrew the jar while the mini chopper/mill is fitted to

your appliance.

●

Do not touch the sharp blades – Keep the blade unit away

from children.

●

Never remove the mini chopper/mill until the blades have

completely stopped.

●

To ensure the long life of your mini chopper/mill, never run

for longer than 30 seconds. Switch off as soon as you have

got the right consistency.

●

The processing of spices is not recommended as they may

damage the plastic parts.

●

The appliance will not work if the mini chopper/mill is

incorrectly fitted.

●

Use for dry ingredients only.

hints

Herbs are best milled when clean and dry.

●

Note: The mini chopper/mill base is not

interchangeable with the glass liquidiser goblet.

The processor will not operate if the wrong base

is fitted. Refer to graphics on blade unit bases.

using the attachments

efer to recommended speed chart for each attachment.

knife blade

The knife blade is the most versatile of all the attachments. The length of the processing time will determine the texture

chieved. For coarser textures use the pulse control.

a Use the knife blade for cake and pastry making, chopping raw and cooked meat, vegetables, nuts, pate, dips,

ureeing soups and to also make crumbs from biscuits and

p bread.

hints

●

Cut food such as meat, bread, vegetables into cubes

pproximately 2cm/

●

iscuits should be broken into pieces and added down the

n before processing.

⁄4i

feed tube whilst the machine is running.

●

When making pastry use fat straight from the fridge cut into

2cm/

⁄4in.cubes.

●

Take care not to over-process.

dough tool

Use for yeasted dough mixes.

●

Place the dry ingredients in the bowl and add the liquid down the feed tube whilst the machine is running. Process until a smooth elastic ball of dough is formed this will take 60 - 90 secs.

●

Re-knead by hand only. Re-kneading in the bowl is not recommended as it may cause the processor to become unstable.

twin beater geared whisk

Use for light mixtures only eg egg whites, cream, evaporated milk and for whisking eggs and sugar for fatless sponges. Heavier mixtures such as fat and flour will damage it.

using the whisk

1 Fit the drive shaft and bowl onto the power unit. 2 Push each beater securely into the drive head . 3 Fit the whisk by carefully turning until it drops over the drive

shaft. 4 Add the ingredients. 5 Fit the lid - ensuring the end of the shaft locates into the

centre of the lid. 6 Switch on.

important

●

The whisk is not suitable for making one-stage

cakes or creaming fat and sugar as these mixes

will damage it. Always use the knife blade for

cake making.

hints

●

Best results are obtained when the eggs are at room

temperature.

●

Ensure the bowl and whisks are clean and free from grease

before whisking.

●

Carefully fold in flour and sugar by hand using a metal spoon

for fatless sponges and meringues.

maxi-blend canopy

When blending liquids, use the maxi-blend canopy with the

nife blade. It allows you to increase the liquid processing

apacity from 1 litre to 1.5 litres, prevents leaking and

c improves the chopping performance of the blade.

1 Fit the drive shaft and bowl onto the power unit.

Fit the knife blade.

Add ingredients to be processed.

3 4 Fit the canopy over the top of the blade ensuring it sits on

the ledge inside the bowl . Do not push down on

he canopy, hold by the centre grip.

5 Fit the lid and switch on.

slicing/grating discs

reversible slicing/grating discs - thick , thin

Use the grating side for cheese, carrots, potatoes and foods of a similar texture. Use the slicing side for cheese, carrots, potatoes, cabbage, cucumber, courgette, beetroot and onions.

fine (Julienne style) chipper disc

Use to cut: potatoes for Julienne style French fries; firm ingredients for salads, garnishes, casseroles and stir fries (eg carrot, swede, courgette, cucumber).

rasping disc

Grates Parmesan cheese and potatoes for German potato dumplings.

safety

●

Never remove the lid until the cutting disc has completely stopped.

●

Handle the cutting discs with care - they are extremely sharp

to use the cutting discs

1 Fit the drive shaft and bowl onto the power unit. 2 Holding by the centre grip , place the disc onto the drive

shaft with the appropriate side uppermost . 3 Fit the lid. 4 Choose which size feed tube you want to use. The pusher

contains a smaller feed tube for processing individual items

or thin ingredients.

To use the small feed tube - first put the large pusher inside

the feed tube.

To use the large feed tube - use both pushers together. 5 Put the food in the feed tube. 6 Switch on and push down evenly with the pusher - never

put your fingers in the feed tube.

hints

●

Use fresh ingredients

●

Don’t cut food too small. Fill the width of the large feed tube

fairly full. This prevents the food from slipping sideways

during processing. Alternatively use the small feed tube.

●

When using the chipper disc, place ingredients horizontally.

●

When slicing or shredding: food placed upright comes

out shorter than food placed horizontally .

●

There will always be a small amount of waste on the plate or

in the bowl after processing.

citrus juicer

se the citrus juicer to squeeze the juice from citrus fruits

U (eg oranges, lemons, limes and grapefruits).

 cone

sieve



to use the citrus juicer

Fit the drive shaft and bowl onto the power unit.

1 2 Fit the sieve into the bowl - ensuring the sieve handle is

locked into position directly over the bowl handle . Place the cone over the drive shaft turning until it drops all

the way down . Cut the fruit in half. Then switch on and press the fruit onto

the cone.

●

he citrus juicer will not operate if the sieve is

T not locked correctly.

●

For best results store and juice the fruit at room temperature and hand roll on a worktop before juicing.

●

To help with juice extraction move the fruit from side to side when juicing.

●

When juicing large quantities, empty the strainer regularly to prevent the build up of pulp and seeds.

mini processor bowl

Use the mini processor bowl to chop herbs and process small quantities of ingredients e.g. meat, onion, nuts, mayonnaise, vegetables, purées, sauces and baby food.

 mini processor knife blade  mini processor bowl

to use the mini processor bowl

1 Fit the drive shaft and bowl onto the power unit. 2 Fit the mini processor bowl - ensuring the ribs on the inside

of the mini bowl chimney align with the slots in the main

bowl chimney . 3 Place the knife blade over the drive shaft . 4 Add the ingredients to be processed. 5 Fit the lid and switch on.

safety

●

Never remove the lid until the knife blade has completely

stopped.

●

The knife blade is very sharp - always handle with care.

important

●

Do not process spices – they may damage the plastic.

●

Do not process hard food such as coffee beans, ice cubes

or chocolate – they may damage the blade.

hints

●

Herbs are best chopped when clean and dry.

●

Always add a little liquid when blending cooked ingredients

to make baby food.

●

Cut foods such as meat, bread, vegetables into cubes

approximately 1-2 cm (

●

When making mayonnaise add the oil down the feed tube.

⁄2 – 3⁄4 in) before processing.

metal centrifugal juicer

Use the centrifugal juicer for making juice from firm fruit

nd vegetables.

a pusher

  centrifugal lid  pulp remover

filter drum

  juicer drive shaft

to use the centrifugal juicer

Fit the juicer drive shaft and bowl onto the power unit.

1 2 Place the pulp remover  into the filter drum  - ensuring

he tabs locate with the slots in the bottom of the drum

t Fit the filter drum 

3 4 Place the attachment lid  onto the bowl and turn until it

locks . Your juicer will not operate if the bowl or lid are not fitted correctly into the interlock .

5 Place a suitable glass or jug under the juice outlet. 6 Cut the food to fit the feed tube. 7 Switch on and push down evenly with the pusher - never

put your fingers in the feed tube. Process fully before adding more.

●

After adding the last piece, let the juicer run for a further 30 seconds to extract all the juice from the filter drum.

safety

●

Do not use the juicer if the filter is damaged.

●

The cutting blades on the base of the filter drum are very sharp, take care when handling and cleaning the drum.

●

Only use the pusher supplied. Never put your fingers in the feed tube. Unplug before unblocking the feed tube.

●

Before removing the lid, switch off and wait for the filter to stop.

important

●

If the juicer starts to vibrate, switch off and empty the pulp

from the drum. (The juicer vibrates if the pulp becomes unevenly distributed).

●

Maximum capacity that can be processed at one time is 500g of fruit or vegetables.

●

Some very hard foods may make your juicer slow down or stop. If this happens switch off and unblock the filter.

●

Switch off and clear the pulp collector regularly during use.

hints

●

Before processing remove stones and pips (eg pepper, melon, plum) and tough skins (eg melon, pineapple). You don’t need to peel or core apples and pears.

●

Use firm, fresh fruit and vegetables.

●

Citrus fruit - peel and remove the white pith, otherwise the juice may taste bitter. For best results use the citrus juicer.

KENSTORE™ attachments carousel

Your food processor is supplied with an attachment storage

arousel that fits inside the bowl.

to use the storage carousel

Fit the knife blade to the bowl.

1 2 Then fit the whisk, discs and canopy into the carousel .

Fit the carousel over the knife blade and place the processor

id on top .

care & cleaning

●

Always switch off and unplug before cleaning.

●

Handle the blades and cutting discs with care -

hey are extremely sharp.

●

Some foods may discolour the plastic. This is perfectly

normal and won’t harm the plastic or affect the flavour of

your food. Rub with a cloth dipped in vegetable oil to remove

the discolouration.

power unit

●

Wipe with a damp cloth, then dry. Ensure that the interlock

area is clear of food debris.

●

Store excess cord in the storage area at the back of the

power unit .

liquidiser/mini chopper/mill

1 Empty the goblet/jar before unscrewing it from the blade

unit. 2 Wash the goblet/jar by hand. 3 Remove and wash the seals. 4 Don’t touch the sharp blades – brush them clean using hot

soapy water, then rinse thoroughly under the tap. Don’t

immerse the blade unit in water.

5 Leave to dry upside down.

twin beater geared whisk

●

Detach the beaters from the drive head by gently pulling

them free. Wash in warm soapy water.

●

Wipe the drive head with a damp cloth, then dry.

Do not immerse the drive head in water.

centrifugal filter drum

●

Lift out the pulp remover and tap lightly to release the pulp.

●

Clean using a soft brush.

●

Check the filter regularly for signs of damage. Do

not use if the filter is damaged. Refer to “service

and customer care”.

ll other parts

●

Wash by hand, then dry.

●

Alternatively they are dishwasher safe and can be washed

n the top rack of your dishwasher. Avoid placing items on

o the bottom rack directly over the heating element. A short low temperature (Maximum 50°C) programme is

ecommended.

tem suitable for

dishwashing

ain bowl, lid, pusher ✔

nife blades, dough tool ✔

hisk beaters ✔

Do not immerse the drive head in water

detachable drive shaft ✔ discs ✔ citrus juicer ✔ centrifugal juicer ✔ mini bowl and knife ✔ liquidiser goblet, lid, filler cap ✔ mill jar ✔ blade unit and seal for liquidiser and mini ✘

chopper/mill spatula ✔ storage carousel ✔

service & customer care

●

f the cord is damaged it must, for safety reasons, be

replaced by KENWOOD or an authorised KENWOOD

epairer.

●

f you experience any problems with the

peration of the processor, before calling for

assistance refer to the troubleshooting guide.

If you need help with:

●

sing your appliance or

●

servicing or repairs

●

Contact the shop where you purchased your appliance.

●

Designed and engineered by Kenwood in the UK.

●

Made in China.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

troubleshooting guide

roblem Cause Solution

The processor will not operate No power/indicator light not lit. Check processor is plugged in

Bowl not fitted to power unit correctly. Check bowl is located correctly and the

Bowl lid not locked on correctly. Check that the lid interlock is located correctly

Liquidiser/mini chopper/mill Liquidiser/mini chopper/mill not locked The liquidiser/mini chopper/mill will not

ill not operate on correctly. operate if fitted incorrectly to the interlock.

Liquidiser/mini chopper/mill not

ssembled correctly.

a Wrong base used. The mill base is not interchangeable

Processor stops during Processor overloaded/maximum capacities Check maximum capacities stated in the processing exceeded. recommended speed chart.

Lid unlocked. Check lid is locked correctly.

Liquidiser/mill leaking from Seal missing Check seal is fitted correctly and not blade assembly base. Seal incorrectly fitted damaged. To obtain a replacement

Seal damaged. seal see “service & customer care”

Poor performance of Refer to hints in relevant “using the attachment” section. Check attachments are tools/attachments. assembled correctly.

andle is situated towards the right hand side.

nto the handle area.

The processor will not work if the bowl and lid are fitted incorrectly.

If none of the above check the fuse/circuit breaker in your home.

Check blade unit is fully tightened into

he goblet.

with the liquidiser goblet. The processor will not operate if the wrong base is fitted.

Check graphic is correct on base used.

+ 25 hidden pages